Gigabyte H270-H70 Manual

Gigabyte H270-H70 Manual

Get Gigabyte H270-H70 PDF manuals and user guides View all Gigabyte H270-H70 manuals
Add to My Manuals
Save this manual to your list of manuals

Gigabyte H270-H70 manual content summary:

  • Gigabyte H270-H70 | Manual - Page 1
    H270-F4G H270-H70 Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3 series processors Service Guide Rev. 1.0
  • Gigabyte H270-H70 | Manual - Page 2
    provides the following types of documentations:  For detailed product information, carefully read the User's Manual. For more information, visit our website at: http://b2b.gigabyte.com You are a professional? Get an access to our complete source of sales, marketing & technical materials at: http
  • Gigabyte H270-H70 | Manual - Page 3
    Before using this information and the product it supports, please read the following general information. 1. This Service Guide provides you with all technical information relating to the BASIC CON- FIGURATION decided for GIGABYTE's "global" product offering. To better fit local marketrequirements
  • Gigabyte H270-H70 | Manual - Page 4
    8 Chapter 1 Hardware Installation 11 1-1 Installation Precautions 11 1-2 Product Specifications (Per Node 12 1-3 System Block Diagram 14 1-3-1 H270-F4G...14 1-3-2 H270-H70...15 Chapter 2 System Hardware Installation 16 2-1 System Components 17 2-2 Replacing Power Supply Board Cage Cover 18
  • Gigabyte H270-H70 | Manual - Page 5
    4-2 Jumper Setting 43 MH70-HD0 (H270-F4G 43 MH70-HD1 (H270-H70 44 Chapter 5 BIOS Setup 45 5-1 The Main Menu 47 5-2 Advanced Menu 50 5-2-1 Serial Port Console Redirection 51 5-2-2 PCI Subsystem Settings 55 5-2-2-1 PCI Express Settings 57 5-2-3
  • Gigabyte H270-H70 | Manual - Page 6
    ...115 5-7 Save & Exit Menu 117 5-8 BIOS POST Codes 119 5-9 BIOS POST Beep code 123 5-9-1 PEI Beep Codes...123 5-9-2 DEX Beep Codes 123 5-10 BIOS Recovery Instruction 124 - 6 -
  • Gigabyte H270-H70 | Manual - Page 7
    Box Contents H270-F4G System/H270-H70 System Driver CD Service Guide Heat Sink x 8 Rail Kit • The box contents above are for reference only and the actual items shall depend on the product package you obtain. The
  • Gigabyte H270-H70 | Manual - Page 8
    safely when it is used in accordance with its marked electricalratings and product usage instructions • Do not use this product near water or a heat source.* Set specified in the product's documentation. • Only authorized service technicians should repair laser devices. Precaution for Product with
  • Gigabyte H270-H70 | Manual - Page 9
    environment. This equipmentgenerates, uses, and can radiate radio frequency energy and, if not installed and used in accordance withthe instruction manual, may cause harmful interference to radio communications. Operation of thisequipment in a residential area is likely to cause harmful interference
  • Gigabyte H270-H70 | Manual - Page 10
    please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. Battery Warning:
  • Gigabyte H270-H70 | Manual - Page 11
    of electrostatic discharge (ESD). Prior to installation, carefully read the service guide and follow these procedures: • Prior to installation, do not remove are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.
  • Gigabyte H270-H70 | Manual - Page 12
    1-2 Product Specifications (Per Node) Motherboard CPU Chipset Memory LAN (H270-F4G) LAN (H270-H70) Expansion Slot Onboard Graphics Mass Storage ŠŠ H270-F4G: MH70-HD0 ŠŠ H270-H70: MH70-HD1 ŠŠ Support for Intel® Xeon® E5-2600 V3 series processors in the LGA2011 package ŠŠ L3 cache varies with CPU ŠŠ
  • Gigabyte H270-H70 | Manual - Page 13
    ŠŠ 1 x 10/100/1000 Management LAN port ŠŠ 2 x RJ-45 ports (H270-H70 Only) ŠŠ 1 x QSFP+ LAN port (H270-F4G Only) ŠŠ 1 x Serial port ŠŠ 1 x VGA port ŠŠ 1 x 1000W Max ŠŠ AC input 200-240V: DC Output 1600W Max * GIGABYTE reserves the right to make any changes to the product specifications and product
  • Gigabyte H270-H70 | Manual - Page 14
    1-3 System Block Diagram 1-3-1 H270-F4G Hardware Installation - 14 -
  • Gigabyte H270-H70 | Manual - Page 15
    1-3-2 H270-H70 Hardware Installation - 15 -
  • Gigabyte H270-H70 | Manual - Page 16
    Chapter 2 System Hardware Installation Pre-installation Instructions Perform the steps below before you open the server or before you remove or replaceany component. • Back up all important system and data files before
  • Gigabyte H270-H70 | Manual - Page 17
    2-1 System Components 2 1 43 5 3 6 7 4 55 65 7 Item Decription 1. Power module 2. Power supply board cage 3. PCI Express card 4. Fan duct 5. Memory module 6. System cooling fan 7. Hard drive Hardware Installation - 17 -
  • Gigabyte H270-H70 | Manual - Page 18
    you remove or install the power supply board cage cover • Make sure the system is not turned on or connected to AC power. Follow these instructions to remove the power supply board cage cover: 1. Loosen and remove the screw securing the cover. 2. Holding the cage and vertically lift it from the
  • Gigabyte H270-H70 | Manual - Page 19
    2-3 Replacing the Motherboard Tray Follow these instructions to replace the motherboard tray: 1. Disconnect the power, SATA, front panel, and mainboard cable connectors. 2. Press the retaining clip on the left side of the
  • Gigabyte H270-H70 | Manual - Page 20
    2-4 Removing and Installing the Fan Duct Follow these instructions to remove/install the fan duct: 1. Lift up to remove the fan duct 2. To install the fan duct, align the fan duct with the guiding groove. Push down the fan duct into chassis until its firmly seats - 20 - Hardware Installation
  • Gigabyte H270-H70 | Manual - Page 21
    you begin to install the CPU: • Make sure that the motherboard supports the CPU. • Always turn off the computer and unplug the power cord described in the following sections unless you are a qualified service technician. Follow these instructions to install the CPU: 1. Release then lift up the
  • Gigabyte H270-H70 | Manual - Page 22
    2-6 Installing the Heat Sink Follow these instructions to install the heat sinks: 1. Apply thermal compound evenly on the top of the CPU. 2. Remove the protective cover from the underside of the heat
  • Gigabyte H270-H70 | Manual - Page 23
    CPU0 P/N: 25ST1-443206-C1R CPU1 P/N: 25ST1-443205-T4R Hardware Installation - 23 -
  • Gigabyte H270-H70 | Manual - Page 24
    are unable to insert the memory, switch the direction. Four Channel Memory Configuration The system provides sixteen DDR4 memory sockets and supports Four Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling
  • Gigabyte H270-H70 | Manual - Page 25
    the power cord from the power outlet to prevent damage to the memory module. Be sure to install DDR4 DIMMs on this motherboard. Follow these instructions to install the Memory: 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down. 2. Close the plastic clip at both edges
  • Gigabyte H270-H70 | Manual - Page 26
    could result in personal injury or damage to equipment. Follow these instructions to PCI Express Expansion card: 1. Loosen the riser bracket screw. card with two screws. 5. Orient the PCI Express card with the riser guide connector and push into the slot until the PCI Express card sits in the
  • Gigabyte H270-H70 | Manual - Page 27
    server prior to installing a PCI Express card. Failure to observe these warnings could result in personal injury or damage to equipment. Follow these instructions to install Add-on card: 1. Remove the fan duct from the system following the steps outlined in 2-4 Removing and Installing the Fan Duct
  • Gigabyte H270-H70 | Manual - Page 28
    not fit back into the bay if inserted incorrectly. • Make sure that the HDD is connected to the HDD connector on the backplane. Follow these instructions to Hard disk drive: 1. Press the release button. 2. Pull the locking lever to remove the HDD tray. 3. Slide hard disk into blank. 4. Secure the
  • Gigabyte H270-H70 | Manual - Page 29
    to reduce the risk of injury from electric shock, disconnect AC power from the power supply before removing it from the system. Follow these instructions to replace the power supply: 1. Disconnect the three power cables. 2. Pull up the power supply handle. 3. Press the retaining clip on the right
  • Gigabyte H270-H70 | Manual - Page 30
    Chapter 3 System Appearance 3-1 Front View 3 1 42 5 5 3 1 42 3 12 4 No. Decription 1 ID button and LED 2. Power button and status LED 3. VGA port 4. USB 3.0 ports 5. HDD bays 3 12 4 NOTE! For detail LED description, please see the following section: Front Panel LED and Buttons and Rear System
  • Gigabyte H270-H70 | Manual - Page 31
    3-2 Rear View H270-F4G 5 4 3 12 67 8 9 10 11 12 5 4 3 13 1 2 67 8 9 10 11 12 3 4 6 9 7 58 11 10 13 1 2 3 4 6 9 7 58 11 10 No. Decription 1. VGA port 2. Serial port 3. Power
  • Gigabyte H270-H70 | Manual - Page 32
    H270-H70 5 4 3 12 67 8 9 10 11 12 5 4 3 12 67 8 9 10 12 3 4 6 8 57 11 9 10 12 12 3 4 6 8 57 9 10 No. Decription 1. VGA port 2. Serial port 3. Power button/LED 4.
  • Gigabyte H270-H70 | Manual - Page 33
    3-3 HDD and Nodes Connection 1 3 2 4 - 33 - Hardware Installation
  • Gigabyte H270-H70 | Manual - Page 34
    3-4 Front Panel LED and Buttons 1 2 No. Name Power button and 1. Status LED 2. ID button and LED Color Green Amber N/A Blue N/A Status Solid On Blink Solid On Blink Off On Off Critical Event Description N/A System is operating normally. Degrade condition, may N/A indicates the following: •
  • Gigabyte H270-H70 | Manual - Page 35
    3-4 Rear System Button and LEDs 23 7 1 45 6 89 No. Name Power button 1. and LED 2. ID Button and LED 3. NMI button 4. Reset Button 5. System Status LED Color Green N/A Blue N/A Green Amber N/A Status Solid On Off Solid On Off Solid On Blink Solid On Blink Off Critical Event
  • Gigabyte H270-H70 | Manual - Page 36
    6. LAN2 Active/ Link LED 7. LAN1 Active/ Link LED 1GbE/ 8. Managemt LAN Speed LED 1GbE/ 9. Managemt LAN Link/ Activity LED Green N/A Green N/A Yellow Green N/A Green N/A Solid On Blink Off Solid On Blink Off On Blink On Blink Off On Blink Off N/A Link between system and network or no
  • Gigabyte H270-H70 | Manual - Page 37
    3-5 Hard Disk Drive LEDs 1 LED Mode No. Non-RAID Onboard RAID 1 SAS RAID Card Description Hard disk drive is not present Hard disk drive is present but not active Hard disk drive is present and active Hard disk drive is not present Hard disk drive is present but not active Hard disk drive is
  • Gigabyte H270-H70 | Manual - Page 38
    3-6 Cable Routing 10 3 6 7 2 10 3 6 2 7 4 9 10 1 4 9 10 1 8 8 49 9 4 8 888 8 888 6 7 65 6 7 65 4 1 2 3 4 1 2 3 No. Suggest Cable No. 1. Front panel I2C Bus cable 2. 3. Front VGA cable 4. 5. HDD back plane board power cable 6. 7. SGPIO cable 8. 9. Mainborad
  • Gigabyte H270-H70 | Manual - Page 39
    Chapter 4 Motherboard Components 4-1 Motherboard Components 4-1-1 MH70-HD0 (H270-F4G) 1 2 3 4 5 6 8 7 9 10 11 40 41 42 39 38 37 33 34 35 36 48 49 43 44 45 47 45 19 13 18 17 16
  • Gigabyte H270-H70 | Manual - Page 40
    27 FP_1 28 SSI_2X9P2 29 DIMM_P1_E0 30 DIMM_P1_E1 31 DIMM_P1_F0 32 DIMM_P1_F1 33 DIMM_P0_C0 34 DIMM_P0_C1 35 DIMM_P0_D0 36 DIMM_P0_D1 37 BMC_SGPIO1 38 F_USB3 39 TPM 40 PCIE_1 41 IPMB 42 LED_BMC 43 SW_RAID 44 CLR_CMOS 45 MEZZ_1 46 ME_UPDATE BIOS_PWD BIOS_RCVR BIOS_WP ME_RCVR S3_MASK 47 PMBUS 48
  • Gigabyte H270-H70 | Manual - Page 41
    4-1-2 MH70-HD1 (H270-H70) 1 2 3 4 5 6 8 7 9 10 11 46 44 43 42 41 40 47 45 36 37 38 39 51 50 48 49 13 12 15 14 16 21 20
  • Gigabyte H270-H70 | Manual - Page 42
    30 FP_1 31 SSI_2X9P2 32 DIMM_P1_E0 33 DIMM_P1_E1 34 DIMM_P1_F0 35 DIMM_P1_F1 36 DIMM_P0_C0 37 DIMM_P0_C1 38 DIMM_P0_D0 39 DIMM_P0_D1 40 BMC_SGPIO1 41 F_USB3 42 TPM 43 PMBUS 44 PCIE_1 45 LED_BMC 46 SMB_SEL 47 IPMB 48 CLR_CMOS 49 MEZZ_1 50 S3_MASK BIOS_WP BIOS_RCVR BIOS_PWD ME_UPDATE 51 PMBUS_SEL
  • Gigabyte H270-H70 | Manual - Page 43
    4-2 Jumper Setting MH70-HD0 (H270-F4G) 10 6 5 1 7 4 8 3 9 2 No. Jumper Code Jumper Setting 1. CLR_CMOS 1-2 Close: Normal operation (Default setting) (Clearing CMOS Jumper) 2-3 Close: Clear CMOS data 2. ME_UPDATE (ME recovery Jumper) 1-2 Close:
  • Gigabyte H270-H70 | Manual - Page 44
    MH70-HD1 (H270-H70) 8 9 1 2 7 36 45 No. Jumper Code Jumper Setting 1. CLR_CMOS 1-2 Close: Normal operation (Default setting) (Clearing CMOS Jumper) 2-3 Close: Clear CMOS data 2. S3_MASK (S3 Power On Select
  • Gigabyte H270-H70 | Manual - Page 45
    Setup program, press the key during the POST when the power is turned on. • BIOS flashing is potentially risky, if you do not encounter problems of using the current BIOS version, it is recommended that you don't flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS
  • Gigabyte H270-H70 | Manual - Page 46
     Main This setup page includes all the items in standard compatible BIOS.  Advanced This setup page includes all the items of AMI BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)  Intel RC Setup This setup page includes
  • Gigabyte H270-H70 | Manual - Page 47
    5-1 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom
  • Gigabyte H270-H70 | Manual - Page 48
    BIOS Information Porject Name Display the project name information. Porject Version Display version number of the BIOS setup utility. BIOS Build Date and Time Displays the date and time when the BIOS setup utility was created. BMC Information BMC Firmware Version Display version number of the
  • Gigabyte H270-H70 | Manual - Page 49
    Onboard LAN Information LAN1/LAN2 MAC Address Display LAN1/LAN2 MAC address information. System Date Set the date following the weekday-month-day- year format. System Time Set the system time following the hour-minute- second format. - 49 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 50
    5-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. BIOS Setup - 50 -
  • Gigabyte H270-H70 | Manual - Page 51
    5-2-1 Serial Port Console Redirection - 51 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 52
    BIOS Setup - 52 -
  • Gigabyte H270-H70 | Manual - Page 53
    with slow devices may require more than 1 stop bit. Options available: 1/2. Default setting is 1. VT-UTF8 Combo Key Support (Note) Enable/Disable VT-UTF8 Combo Key Support. Options available: Enabled/Disabled. Default setting is Enabled. Recorder Mode (Note) When this mode enabled, only text will
  • Gigabyte H270-H70 | Manual - Page 54
    Note) On Legacy OS, the number of Rows and Columns supported redirection. Options available: 80x24/80X25. Default setting is 80x24. setting is Always Enable. Out-of-Bnad Mgmt Port Microsoft Windows Emerency Management Service (EMS) allows for remote management of a Windows Server OS through a serial
  • Gigabyte H270-H70 | Manual - Page 55
    5-2-2 PCI Subsystem Settings PCI Express Slot #1/#2 I/O ROM When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Options available: Enabled/Disabled. Default setting is Enabled. Onboard LAN#1/#2 Controller Enable/Disable onboard LAN devices. Options
  • Gigabyte H270-H70 | Manual - Page 56
    SR-IOV Support If system has SR-IOV capable PCIe Devices, this option enables or disables Single Root IO Virtualization Support. Options available: Enabled/Disabled. Default setting is Disabled. PCI Express Settings Press [Enter] for configuration of advanced items. BIOS Setup - 56 -
  • Gigabyte H270-H70 | Manual - Page 57
    5-2-2-1 PCI Express Settings PCI Express Device Register Settings Relaxed Ordering Enable/DIsable PCI Express Device Relaxed Ordering feature. Options available: Enabled/Disabled. Default setting is Disabled. Extended Tag Wnen this feature is enabled, the system will allow device to use 8-bit Tag
  • Gigabyte H270-H70 | Manual - Page 58
    Link Training Timeout (us) Define the number of Microseconds software will wait before polling 'Link Training' bit in Link Status register. Press / keys to increase or decrease the desired values. Value rang is from 10 to 10000 us. Unpopulated Links When this item is set to 'Disable Link,
  • Gigabyte H270-H70 | Manual - Page 59
    (Note) Enable/Disable Ipv4 PXE feature. Options available: Enabled/DIsabled. Default setting is Enabled. Ipv6 PXE Support(Note) Enable/Disable Ipv6 PXE feature. Options available: Enabled/DIsabled. Default setting is Enabled. PXE boot wait time(Note) Press / keys to increase or decrease
  • Gigabyte H270-H70 | Manual - Page 60
    Support Module Configuration CSM Support Enable/Disable Compatibility Support Module (CSM) support. Options available: Enabled/Disabled. Default setting is Enabled. CSM16 Module Version Display CSM Module version information. Gate20 Active Upon Request: GA20 can be disabled using BIOS services
  • Gigabyte H270-H70 | Manual - Page 61
    Option ROM execution Network Controls the execution UEFI and Legacy PXE OpROM. Options available: Do not launch/UEFI/Legacy. Default setting is Legacy. Storage Controls the execution UEFI and Legacy Storage OpROM. Options available: Do not launch/UEFI/Legacy. Default setting is Legacy. Video
  • Gigabyte H270-H70 | Manual - Page 62
    5-2-5 Post Report Configuration Post Report Configuration Error Message Report Post Error Message Enable/Disable Info Error Message support. Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup - 62 -
  • Gigabyte H270-H70 | Manual - Page 63
    5-2-6 Trusted Computing Configuration Security Device Support Select Enabled to activate TPM support feature. Options available: Enabled/Disabled. Default setting is Disabled. Current Status Information Display current TPM status information. - 63 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 64
    USB Configuration USB Devices: Display the USB devices connected to the system. XHCI Hand-off Enable/Disable XHCI (USB 3.0) Hand-off support. Options available: Enabled/Disabled. Default setting is Enabled. EHCI Hand-off Enable/Disable EHCI (USB 2.0) Hand-off function. Options available: Enabled
  • Gigabyte H270-H70 | Manual - Page 65
    5-2-8 Chipset Configuration Restore on AC Power Loss (Note) Defines the power state to resume to after a system shutdown that is due to an interruption in AC power. When set to Last State, the system will return to the active power state prior to shutdown. When set to Stay Off, the system remains
  • Gigabyte H270-H70 | Manual - Page 66
    5-9 SIO Configuration BIOS Setup - 66 -
  • Gigabyte H270-H70 | Manual - Page 67
    AMI SIO Driver Version Display the AMI SIO driver version information. Super IO Chip Logical Device(s) Configuration [*Active*] Serial Port 1/2 Press [Enter] for confuguration of advanced items. Serial Port 1 Configuration Use This Device When enabled allows you to configure the serial port 1
  • Gigabyte H270-H70 | Manual - Page 68
    Possible: Configure Serial Port 1 base I/O addressand IRQ. Option available: Use Automatic Settings IO=3F8h; IRQ=4; DMA;/ IO=3F8h; IRQ=3,4,5,7,9,10,11,12; DMA;/ IO=2F8h; IRQ=3,4,5,7,9,10,11,12; DMA;/ IO=3E8h; IRQ=3,4,5,7,9,10,11,12; DMA;/ IO=2E8h; IRQ=3,4,5,7,9,10,11,12; DMA;. Default setting is Use
  • Gigabyte H270-H70 | Manual - Page 69
    5-2-10 iSCSI Configuration iSCSI Initiator Name Add an Attempts Press [Enter] for configuration of advanced items. Delete Attempts Press [Enter] for configuration of advanced items. Change Attempt Order Press [Enter] for configuration of advanced items. - 69 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 70
    5-3 Intel RC Setup Menu Intel RC Setup menu displays submenu options for configuring the function of North Bridge and South Bridge. Select a submenu item, then press Enter to access the related submenu screen. RC Revision Display Intel RC version information. BIOS Setup - 70 -
  • Gigabyte H270-H70 | Manual - Page 71
    5-3-1 Processor Configuration - 71 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 72
    Disabled. Default setting is Enabled. Enable SMX (Intel Safer Mode Extensions Technology) Enable/Disblae Intel Safer Mode Extensions (SMX) support function. Options available: Enabled/Disabled. Default setting is Disabled. Hardware Prefetcher Select whether to enable the speculative prefetch unit of
  • Gigabyte H270-H70 | Manual - Page 73
    /112. Default setting is 32. X2APIC Options available: Enabled/Disabled. Default setting is Disabled. AES-NI Enable/Disable AES-NI (Intel Advanced Encryption Standard New Instructions) support function. Options available: Enabled/Disabled. Default setting is Enabled. - 73 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 74
    5-3-1-1 Pre-Socket Configuration BIOS Setup - 74 -
  • Gigabyte H270-H70 | Manual - Page 75
    CPU Socket 0/1 Configuration Press [Enter] for configuration of advanced items. Cores Enabled (for CPU socket 0/1) Number of Cores to enable. 0 means all cores. 14 Cores is available. Press the numeric keys to adjust desired values. - 75 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 76
    5-3-2 Advanced Power Management Configuration Advanced Power Management Configuration Power Technology Option available:Disable/Energy Efficient/Custom. Default setting is Custom. Config TDP Options available: Enabled/Disabled. Default setting is Enabled. Config TDP Level Options available: Nominal
  • Gigabyte H270-H70 | Manual - Page 77
    5-3-2-1 CPU P State Control EIST (P-State) Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem between high and low levels in response to processor load. Options available: Enabled/Disabled. Default setting is Enabled. Turbo Mode When this item is enabled, tje
  • Gigabyte H270-H70 | Manual - Page 78
    5-3-2-2 CPU C State Control Package C State Limit Configure state for the C-State package limit. Options available: C0/C1 state/C2 state/C6(non Retention) state/C6(Retention) state. Default setting is C6(non Retention) state. CPU C3/C6 Report Allows you to determine whether to let the CPU enter C3/
  • Gigabyte H270-H70 | Manual - Page 79
    5-3-2-3 CPU T State Control ACPI T-States Enable/Disable CPU throttling by OS. Thorttling reduces power comsumption. Options available: Enabled/Disabled. Default setting is Enabled. - 79 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 80
    5-3-3 Common RefCode Configuration Common RefCode Configuration Isoc Mode Options available: Enabled/Disabled. Default setting is Disabled. Numa (Non-Uniform Memory Access) Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup - 80 -
  • Gigabyte H270-H70 | Manual - Page 81
    5-3-4 QPI Configuration - 81 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 82
    QPI General Configuration Press [Enter] for configuration of advanced items. QPI Status Press [Enter] to view QPI status. Link Speed Mode Options available: Slow/Fast. Default setting is Fast. Link Frequency Select Options available: 6.4GB/s/8.0GB/s/9.6GB/s/Auto/Auto Limited. Default setting is Auto
  • Gigabyte H270-H70 | Manual - Page 83
    POR. Memory Frequency Configure memory frequency. Options available: Auto/1333/1400/1600/1800/1867/2000/2133. Default setting is Auto. ECC Support Options available: Auto/Disabled/Enabled. Default setting is Auto. Rank Margin Tool Options available: Auto/Disabled/Enabled. Default setting is Auto
  • Gigabyte H270-H70 | Manual - Page 84
    Memory RAS Configuration Press [Enter] for configuration of advanced items. BIOS Setup - 84 -
  • Gigabyte H270-H70 | Manual - Page 85
    5-3-5-1 Memory Topology - 85 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 86
    5-3-5-2 Memory Thermal Set Throttling Configure Thermal Throttling Mode. Select OLTT or CLTT mode. Options available: Disabled/OLTT/CLTT. Default setting is CLTT. DIMM Temp Stat Display DIMM Temp Stat. MEMHOT Throttling Mode Options available: Disabled/Output-only/Input-only. Default setting is
  • Gigabyte H270-H70 | Manual - Page 87
    5-3-5-3 Memory Map Socket Interleave Below 4GB Splits the 0-4GB address space between two sockets, so that both sockets get a chunk of local memory below 4GB. Options available: Disabled/Enabled. Default setting is Disabled. Channel Interleaving Options available: Auto/1-way Interleave/2-way
  • Gigabyte H270-H70 | Manual - Page 88
    5-3-5-4 Memory RAS Configuration RAS Mode Enable/Disable RAS modes. Enabling Sparing and Mirroring is not supported. When this item is set to enabled, Sparing will be selected. Options available: Disable/Mirror/Lockstep Mode. Default setting is Disabled. Lockstep x4 DIMMs Options
  • Gigabyte H270-H70 | Manual - Page 89
    5-3-6 IIO Configuration IIO Configuration EV DFX Features Set this option to allow DFX Lock Bits to remain clear. Options available: Enabled/Disabled. Default setting is Disabled. IOAT Configuration Press [Enter] for configuration of advanced items. Intel VT for Directed I/O (VT-d) Press [Enter]
  • Gigabyte H270-H70 | Manual - Page 90
    5-3-6-1 IOAT Configuration IOAT Configuration Enable IOAT Control to enable/disable IOAT (Intel I/O Acceleration Technology) device. Options available: Enabled/Disabled. Default setting is Disabled. No Snoop Enable/Disable PCI Express Device No Snoop option. Options available: Enabled/Disabled.
  • Gigabyte H270-H70 | Manual - Page 91
    optimizations. Options available: Enabled/Disabled. Default setting is Disabled. Intel VT for Directed I/O (VT-d) Enable/Disable Intel VT for Directed I/O (VT-d) support function. Options available: Enabled/Disabled. Default setting is Enabled. Interrupt Remapping Enable/Disable interrupt remapping
  • Gigabyte H270-H70 | Manual - Page 92
    5-3-7 PCH Configuration PCH Configuration PCH Devices Press [Enter] for configuration of advanced items. PCH SATA Configuration Press [Enter] for configuration of advanced items. USB Configuration Press [Enter] for configuration of advanced items. BIOS Setup - 92 -
  • Gigabyte H270-H70 | Manual - Page 93
    5-3-7-1 PCH Devices PCH CRID Enable/Disable Intel Compatible Revision ID. Options available: Enabled/Disabled. Default setting is Disabled. - 93 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 94
    5-3-7-2 PCH SATA Configuration BIOS Setup - 94 -
  • Gigabyte H270-H70 | Manual - Page 95
    SATA RSTe Boot Information. Options available: Enabled/Disabled. Default setting is Enabled. SATA Mode options(Note 2) Press [Enter] for configuration of advanced items. (Note 1) Only Supported When HDD is in RAID Mode. (Note 2) Only Supported When HDD is in AHCI or RAID Mode. - 95 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 96
    Note) Enable/Disable HDD Hot-Plug function. Options available: Enabled/Disabled. Default setting is Disabled. Configured as eSATA(Note) Display Hot-Plug supported information. Spin Up Device (for Port 0/1/2/3/4/5)(Note) On an edge detect from 0 to 1, the PCH starts a COM reset initialization to the
  • Gigabyte H270-H70 | Manual - Page 97
    5-3-7-2-1 SATA Mode Options When SATA Type is set to IDE/AHCI Mode SATA LED locate When this option is enabled, LED/SGPIO hardware is attached. Options available: Enabled/Disabled. Default setting is Enabled. - 97 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 98
    banner Options available: Enabled/Disabled. Default setting is Enabled. Smart Response Technology Enable/Disable Intel Smart Response Technology support function. Options available: Enabled/Disabled. Default setting is Enabled. RAID OROM prompt delay Options available: 2 Seconds/4 Seconds/6 Seconds
  • Gigabyte H270-H70 | Manual - Page 99
    work on USB host conteoller and root ports for faster enumeration. Options available: Enabled/Disabled. Default setting is Disabled. xHCI Mode Enable/Disable xHCI (USB 3.0) support function. Options available: Smart Auto/Enabled/Disabled. Default setting is Smart Auto. - 99 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 100
    5-3-8 Miscellaneous Configuration Miscellaneous Configuration Active Video Select active Video type. Options available: Onboard Device/Offboard Device. Default setting is Offboard Device. BIOS Setup - 100 -
  • Gigabyte H270-H70 | Manual - Page 101
    5-3-9 Server ME Configuration Greneral ME Configuration Operational Firmware Version Display Operational Firmware Version information. Recovery Firmware Version Display Recovery Firmware Version information. ME Firmware Features Display ME Firmware features information. ME Firmware Status #1/#2
  • Gigabyte H270-H70 | Manual - Page 102
    System Errors Enable/Disable system error logging function. Options available: Enabled/Disabled. Default setting is Enabled. S/W Error Injection Support Enable/Disable software injection error logging function. Options available: Enabled/Disabled. Default setting is Enabled. Whea Settings Press
  • Gigabyte H270-H70 | Manual - Page 103
    5-3-10-1 Whea Setting WHEA Support (Windows Hardware Error Architecture) Enable/Disable WHEA Support. Options available: Enabled/Disabled. Default setting is Enabled. - 103 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 104
    5-3-10-2 Memory Error Enabling Memory Error Enabling Un-Correctable Errors disable Memory Options available: Enabled/Disabled. Default setting is Disabled. Memory corrected Errors enabling Options available: Enabled/Disabled. Default setting is Disabled. BIOS Setup - 104 -
  • Gigabyte H270-H70 | Manual - Page 105
    5-3-10-3 PCI/PCI Error Enabling PCI-Ex Error Enable Options available: Yes/No. Default setting is Yes. - 105 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 106
    5-4 Server Management Menu FRB-2 Timer Enable/Disable FRB-2 timer (POST timer). Options available: Enabled/Disabled. Default setting is Disabled. FRB2 Timer timeout Configure the FRB2 Timer timeout. Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is 6 minutes. Please
  • Gigabyte H270-H70 | Manual - Page 107
    System Event Log Press [Enter] for configuration of advanced items. View FRU Information Press [Enter] to view the advanced items. BMC network configuration Press [Enter] for configuration of advanced items. - 107 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 108
    5-4-1 System Event Log Enabling/Disabling Options SEL Components Change this to enable or disable all features of System Event Logging during boot. Options available: Enabled/Disabled. Default setting is Enabled. Erasing Settings Erasing SEL Choose options for erasing SEL. Options available: No/Yes
  • Gigabyte H270-H70 | Manual - Page 109
    5-4-2 View FRU Information The FRU page is a simple display page for basic system ID information, as well as System product information. Items on this window are non-configurable. - 109 - BIOS Setup
  • Gigabyte H270-H70 | Manual - Page 110
    5-4-3 BMC network configuration BMC network configuration Lan Channel 1 Configuration Address source Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option willnot modify any BMC network parameters during BIOS phase. Options available: Unspecified/Static/
  • Gigabyte H270-H70 | Manual - Page 111
    5-5 Security Menu The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that you can set: • Administrator Password Entering this password will allow the user to access and change all settings in the
  • Gigabyte H270-H70 | Manual - Page 112
    automatically load the Secure Boot keys form the BIOS databases. When set to Custom, you can customize the Secure Boot settings and manually load its keys from the BIOS database. Options available: Standard/Custom. Default setting is Standard. Key Management(Note) Press [Enter] for configuration
  • Gigabyte H270-H70 | Manual - Page 113
    5-5-1-1 Key Management Default Key Provisioning Force the system to Setup Mode. This will clear all Secure Boot Variables such as Platform Key (PK), Key-exchange Key (KEK), Authorized Signature Database (db), and Forbidden Signaures Database (dbx). Options available: Enabled/Disabled. Default
  • Gigabyte H270-H70 | Manual - Page 114
    Append Var to KEK Press [Enter] to load additional KEK from a storage devices for an additional db and dbx management. Authorized Signature Database (DB) Display the status of Authorized Signature Database. Delete DB Press [Enter] to delete the db from your system. Set new DB Press [Enter] to
  • Gigabyte H270-H70 | Manual - Page 115
    5-6 Boot Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Configuration Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means
  • Gigabyte H270-H70 | Manual - Page 116
    Hard Drive BBS Priorities Press Enter to configure the boot priority. BIOS Setup - 116 -
  • Gigabyte H270-H70 | Manual - Page 117
    5-7 Save & Exit Menu The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press Enter. Save Changes and Exit Saves changes made and close the BIOS setup. Options available: Yes/No. Discard Changes and Exit Discards changes made and exit the
  • Gigabyte H270-H70 | Manual - Page 118
    Boot Override Press Enter to configure the device as the boot-up drive. UEFI: Built-in in EFI Shell Press on this item to Launch EFI Shell from filesystem device. BIOS Setup - 118 -
  • Gigabyte H270-H70 | Manual - Page 119
    5-8 BIOS POST Codes PEI_CORE_STARTED 0x10 PEI_CAR_CPU_INIT 0x11 // reserved for CPU 0x12 - 0x14 PEI_CAR_NB_INIT 0x15 // reserved for NB 0x16 - 0x18 PEI_CAR_SB_INIT 0x19 // reserved for SB 0x1A - 0x1C PEI_MEMORY_SPD_READ 0x1D PEI_MEMORY_PRESENCE_DETECT 0x1E PEI_MEMORY_TIMING 0x1F
  • Gigabyte H270-H70 | Manual - Page 120
    DXE_CPU_INIT //reserved for CPU 0x64 - 0x67 DXE_NB_HB_INIT DXE_NB_INIT DXE_NB_SMM_INIT //reserved for NB 0x6B - 0x6F DXE_SB_INIT DXE_SB_SMM_INIT DXE_SB_DEVICES_INIT //reserved for SB 0x73 - 0x77 DXE_ACPI_INIT DXE_CSM_INIT //reserved for AMI use: 0x7A - 0x7F //reserved for OEM use: 0x80 - 0x8F
  • Gigabyte H270-H70 | Manual - Page 121
    DXE_READY_TO_BOOT DXE_LEGACY_BOOT DXE_EXIT_BOOT_SERVICES RT_SET_VIRTUAL_ADDRESS_MAP_BEGIN RT_SET_VIRTUAL_ADDRESS_MAP_END DXE_LEGACY_OPROM_INIT DXE_RESET_SYSTEM DXE_USB_HOTPLUG DXE_PCI_BUS_HOTPLUG DXE_NVRAM_CLEANUP DXE_CONFIGURATION_RESET //reserved for AMI use: 0xB8 - 0xBF //reserved for OEM use:
  • Gigabyte H270-H70 | Manual - Page 122
    PEI_MEMORY_S3_RESUME_FAILED PEI_S3_RESUME_PPI_NOT_FOUND PEI_S3_BOOT_SCRIPT_ERROR PEI_S3_OS_WAKE_ERROR //reserved for AMI use: 0xEC - 0xEF // DXE_STATUS_CODE DXE_CPU_ERROR DXE_NB_ERROR DXE_SB_ERROR DXE_ARCH_PROTOCOL_NOT_AVAILABLE DXE_PCI_BUS_OUT_OF_RESOURCES DXE_LEGACY_OPROM_NO_SPACE DXE_NO_CON_OUT
  • Gigabyte H270-H70 | Manual - Page 123
    5-9 BIOS POST Beep code 5-9-1 PEI Beep Codes # of Beeps 1 1 2 3 3 4 4 7 Description Memory not Installed. Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed S3 Resume failed
  • Gigabyte H270-H70 | Manual - Page 124
    becomes corrupt the boot block can be used to restore the BIOS to a working state. To restore your BIOS, please follow the instructions listed below: Recovery Instruction: 1. Change xxx.ROM to amiboot.rom. 2. Copy amiboot.rom and AFUDOS.exe to USB diskette. 3. Setting BIOS Recovery jumper to enabled
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
H270-F4G
H270-H70
Dual LGA2011 sockets R3 motherboard for Intel
®
E5-2600 V3 series processors
Service Guide
Rev. 1.0