Gigabyte X570 AORUS ULTRA RAID Setup Guide
Gigabyte X570 AORUS ULTRA Manual
 |
View all Gigabyte X570 AORUS ULTRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte X570 AORUS ULTRA manual content summary:
- Gigabyte X570 AORUS ULTRA | RAID Setup Guide - Page 1
Set (X570 AORUS Series) RAID Levels...2 1-1 Configuring SATA Controllers 2 A. Installing SATA hard drive(s) in your computer 2 B. Configuring SATA controller mode in BIOS Setup 3 C. UEFI RAID Configuration 3 1-2 Installing the SATA RAID/AHCI Driver and Operating System 7 A. Installing Windows - Gigabyte X570 AORUS ULTRA | RAID Setup Guide - Page 2
that you use two hard drives with identical model and capacity). (Note 3) •• A Windows setup disk. •• Motherboard driver disk. •• A USB thumb drive. 1-1 Configuring SATA Controllers A. Installing SATA hard drive(s) in your computer Install the hard drives/SSDs in the SATA/M.2 connectors on the - Gigabyte X570 AORUS ULTRA | RAID Setup Guide - Page 3
UEFI RAID Configuration Step 1: In BIOS Setup, go to Boot and set CSM Support to Disabled (Figure 2). Save the changes and exit BIOS Setup. Figure 2 The BIOS Setup menus described in this section may differ from the exact settings for your motherboard. The actual BIOS Setup menu options you will see - Gigabyte X570 AORUS ULTRA | RAID Setup Guide - Page 4
to enter the Create Array screen. Then, select a RAID level (Figure 4). RAID levels supported include RAID 0, RAID 1, and RAID 10 (the selections available depend on the number of the hard drives being installed). Next, press on Select Physical Disks to enter the Select Physical Disks screen - Gigabyte X570 AORUS ULTRA | RAID Setup Guide - Page 5
Step 4: On the Select Physical Disks screen, select the hard drives to be included in the RAID array and set them to Enabled. Next, use the down arrow key to move to Apply Changes and press (Figure 5).Then return to the previous screen and set the Array Size, Array Size Unit, Read Cache - Gigabyte X570 AORUS ULTRA | RAID Setup Guide - Page 6
After completing, you'll be brought back to the Array Management screen. Under Manage Array Properties you can see the new RAID volume and information on RAID level, array name, array capacity, etc. (Figure 7) Figure 7 Delete RAID Volume To delete a RAID array, select the array to be deleted on the - Gigabyte X570 AORUS ULTRA | RAID Setup Guide - Page 7
not need to install separate RAID/ AHCI driver during the Windows installation process. After the operating system is installed, we recommend that you install all required drivers from the motherboard driver disk using "Xpress Install" to ensure system performance and compatibility. If the operating - Gigabyte X570 AORUS ULTRA | RAID Setup Guide - Page 8
have been installed from the motherboard driver disk. Then double-click the RAIDXpert2 icon on the desktop to launch the RAID utility. Step 1: Enter the login ID and password (default: "admin"), and then click Submit to launch AMD RAIDXpert2. Step 2: In the Disk Devices section, left-click your
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
- 1 -
Configuring a RAID Set (X570 AORUS Series)
RAID Levels
.....................................................................................................................
2
1-1 Configuring SATA Controllers
....................................................................................
2
A. Installing SATA hard drive(s) in your computer
.......................................................
2
B. Configuring SATA controller mode in BIOS Setup
..................................................
3
C. UEFI RAID Configuration
.......................................................................................
3
1-2 Installing the SATA RAID/AHCI Driver and Operating System
..................................
7
A. Installing Windows
.................................................................................................
7
B. Rebuilding an Array
................................................................................................
8