Haier 40-MS User Manual

Haier 40-MS Manual

Get Haier 40-MS PDF manuals and user guides View all Haier 40-MS manuals
Add to My Manuals
Save this manual to your list of manuals

Haier 40-MS manual content summary:

  • Haier 40-MS | User Manual - Page 1
    ALFA Twin-tub Washing Machine User's manual Model: 40-MS Please read this manual carefully before using. Retain it for future reference.
  • Haier 40-MS | User Manual - Page 2
    Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-Shooting *Answer to question Packing list *Specification
  • Haier 40-MS | User Manual - Page 3
    Names of the parts Spin timer Wash selector Wash timer Water-filling entrance Control panel Overflow filter Lint filter(Installed by user) Valve cover Pulsator Wash tub Wash tub cover Base frame Outer cover of the spin tub Inner cover of the spin tub Spin tub frame Spin tub Cabinet Meaning and
  • Haier 40-MS | User Manual - Page 4
    the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean. Do not put the machine at damp place like the bathroom . Never wash it with water
  • Haier 40-MS | User Manual - Page 5
    Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing
  • Haier 40-MS | User Manual - Page 6
    Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package,please take out the lint
  • Haier 40-MS | User Manual - Page 7
    the rear side as per the direction of the arrow. (When the drainhose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 4). Embed into the groove in turn Figure 3 Figure 4 Install the water inlet
  • Haier 40-MS | User Manual - Page 8
    Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3. Put the drain hose up to suitable
  • Haier 40-MS | User Manual - Page 9
    to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. 7
  • Haier 40-MS | User Manual - Page 10
    , soft current) OFF STANDARD SOFT DRAIN Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF WASH TIMER WASH SELECTOR SPIN TIMER Wash 1. Fill the water and add the dissolved washing powder to make the water
  • Haier 40-MS | User Manual - Page 11
    Spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper The laundries Proper No gland are slanting (2) Close the inner and outer cover of the spin tub.
  • Haier 40-MS | User Manual - Page 12
    Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must
  • Haier 40-MS | User Manual - Page 13
    Cleaning the overflow filter 2. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 3. Install the overflow filter. (1).Insert the mounting plate at the bottom of the filter into the valve cover. (2).Hang up the hook at the left upper side. (3).Push the upper
  • Haier 40-MS | User Manual - Page 14
    Trouble-shooting Answers to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, Please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. When the remained
  • Haier 40-MS | User Manual - Page 15
    Trouble-shooting Answer to question (If there's breakdown, please pull off the power to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason The machine does not
  • Haier 40-MS | User Manual - Page 16
    Packing list Name User's manual Water inlet hose Lint filter Gland Twin-tub washing machine Quantity One piece One piece One piece One piece One set Specification Water level/Water
  • Haier 40-MS | User Manual - Page 17
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
ALFA
Twin-tub
Washing Machine
User's
manual
Model: 40-MS
Please read this manual carefully before using.
Retain it for future reference.