Haier AWT-80LI User Manual
Haier AWT-80LI Manual
 |
View all Haier AWT-80LI manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier AWT-80LI manual content summary:
- Haier AWT-80LI | User Manual - Page 1
Trouble-shooting If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, Please contact the after-sales service SEMI AUTO WASHING MACHINE AWT-80LI USER WASHING MACHINE Manual CONTENTS Packing list Specification Names of the parts Safety - Haier AWT-80LI | User Manual - Page 2
Pa×cki°ng lÏist Name User's manual Quantity One piece Water inlet hose One piece Gland Semi Auto washing machine One piece One set Specification Rated voltage frenquency 220V 50Hz Water level - Haier AWT-80LI | User Manual - Page 3
Móaóint´´ena¦¦ncÀeÀ íí After using, please clean the lint and eyewinker of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be - Haier AWT-80LI | User Manual - Page 4
is being moved, cleaned or when it is idle. Earth If the supply cord is damaged,it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Do not put the machine at damp place like the bathroom . Never wash it with - Haier AWT-80LI | User Manual - Page 5
Rinsing Rinse with water-filling 1.Put the laundries Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3. - Haier AWT-80LI | User Manual - Page 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package,please take out the lint - Haier AWT-80LI | User Manual - Page 7
, standard current) STRONG STANDARD Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF 5 1 12 6 9 Âé WASH TIMER DRAIN WASH SELECTOR 4 2 SPIN TIMER 3 Wash 1 Inlet selector (1) Set inlet selector to Wash side - Haier AWT-80LI | User Manual - Page 8
prone to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. powder is different. Please refer to the instruction of the washing powder for the detail dosage. 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Safety precautions
Installation and adjustment
Preparation
before washing
Usage of
the detergent
Washing sequence
Names of the parts
Packing list
Trouble-Shooting
Specification
SEMI AUTO WASHING MACHINE
AWT-80LI
USER
Manual
WASHING MACHINE
CONTENTS
Maintenance
Do s and don ts
(If
there's
breakdown,
please pull
off the power
plug
before checking) The following
phenomena are not
breakdowns
sometimes.
Please
confirm
again
before sending
it to repair.
If there are real
breakdowns,
please come to
the
special
maintenance
department or after-sale service department of our company. Do not repair it by yourself.
Trouble-shooting
Phenomena
Use it when the power is on.
Insert the power plug tightly.
Remove the foreign materials?
Put down the drain hose?
Remove the foreign material?
Please contact the after-sales
service department.
Level the machine properly.
Pressed the gland
evenly
Remove the laundries
Remove a little
laundries
The reason
How to settle
The machine does
not function.
Is there power failure?
Is the power plug loose?
Is the pulsator twisted by
foreign materials?
Has
the drain hose being
laid down?
Is the drain hose blocked
by foreign material?
Are there any
laundries
trapped at the outer side
of the spin tub?
There's abnormal
sound during
washing
Remove the hair pin, coins or
metal items
Are there hair pin, coins
or meta
items brought
inside the tub?
Is the machine slanting?
Is the gland pressed evenly?
Are there any
laundries trapped
at the outer side of the spin tub?
Are the laundries in spin tub over
loaded?
There's abnormal
sound and violent
vibration during
spinning
The draining does
not function
14
If the laundries fall to the outer side of the spin tub,
Please contact the after-sales
service department.
If the laundries fall to the outer side of the spin tub