Haier EDC1070M User Manual

Haier EDC1070M Manual

Get Haier EDC1070M PDF manuals and user guides View all Haier EDC1070M manuals
Add to My Manuals
Save this manual to your list of manuals

Haier EDC1070M manual content summary:

  • Haier EDC1070M | User Manual - Page 1
    Manual EDC1070W/EDC1070M Table of Contents Before using the dryer Name of Parts 1 Important Safety Instructions .....2-3 Installation 4-6 Preparation 7 How to operate the dryer Control panel 8-9 Programming guide 10 Drying methods 11 Maintenance Cleaning and maintenance .......12-13 Trouble
  • Haier EDC1070M | User Manual - Page 2
    . 7.Do not tamper with controls. 8.Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have skills to carry out. 9.Do not dry items containing
  • Haier EDC1070M | User Manual - Page 3
    the accessories and materials provided with the machine: Name Owner's Certificate of manual Conformity Drainpipe Quantity To ensure the dryer operates normally, attention must be paid to the following instructions; The dryer must be level when installed. Its bottom is equipped with adjustable
  • Haier EDC1070M | User Manual - Page 4
    or receptacle to make them accord with each other; The replacement of the power supply cable must be done by a qualified professional or our authorized service agent; ■The dryer must be grounded securely. Treatment of laundry to dry ■Check the care label inside the garments to ensure the items can
  • Haier EDC1070M | User Manual - Page 5
    the programme selected, the drying stage reached is shown by the indicator lamps on the control panel: Séchage - Drying Prêt à repasser - Ready to iron Air frais - Airing Anti-froissage - End/Anti-crease At the end of a programme,the End/Anti-crease indicator lamp comes on. The drum will continue to
  • Haier EDC1070M | User Manual - Page 6
    Programming Guide Program Degree of drying COTTON Sec * Prêt à ranger Prêt à repasser to start the program 6. Program completion Before the drying program ends, the dryer will enter the cold air cycle. After the program is complete, the display screen will display "End." Open the door program
  • Haier EDC1070M | User Manual - Page 7
    Cleaning and Maintenance 1 Cleaning the surface Wipe the body of the dryer and the control panel with a damp cloth. Remember not use any organic solvent or corrosive agent to avoid damage to the machine. 2. Cleaning the filter screen To ensure a good ventilation during drying, the filter screen must
  • Haier EDC1070M | User Manual - Page 8
    Trouble Shooting The following must be confirmed before calling for service: Problem The dryer does not switch on Possible Cause ● Is the power supply plugged in and switched on. ● Plug another appliance into the wall socket to test if there is power. ● Check if a drying program has been set; ●
  • Haier EDC1070M | User Manual - Page 9
    Wiring Circuit K1 NTC K2 H K3 N FA G L PCB1 PCB2 R1 R2 L P S M T1 T2 FA-Electromagnetic interference inhibitor R1 Heating1 R2 Heating2 T1 Thermal cut-out T2 Thermostat PS Drainage pump M Motor K1 Door switch K2 Level switch PCB1 PCB2 Printed circuit board L Lamp NTC Temperature
  • Haier EDC1070M | User Manual - Page 10
    limited. 3. If the appliance is used or installed more than Fifty (50) kilometres from the nearest Kelvinator Authorised Service Agent, the additional distance covered use of controls or failure to use the appliance in accordance with the operating instructions and/or general misuse and/or abuse,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Table of Contents
Before using the dryer
Installation
.....................................
4-6
Preparation
......................................
7
How to operate the dryer
Control panel
.................................
8-9
Drying methods
...............................
11
Cleaning and maintenance
.......
12-13
Specifications
.................................
17
Wiring circuit
..................................
16
Maintenance
Trouble shooting
.....................
..
14-15
l
a
u
n
a
M
n
o
i
t
a
r
e
p
O
Program selector
Container handle
Name of Parts
Door
Plinth
SAVE THESE INSTRUCTIONS
Programming guide
.........................
10
Important Safety Instructions
.....
2-3
Name of Parts
....................................
1
This diagram may be slightly different from the layout of the machine you have just
purchased due to techincal improvements
Read all instructions before using dryer.
Dryers are provided with operating,care and in-
stallation instructions
Warning
1
Drainage outlet
Earth terminal
Power supply cable
Rear footplate
Back plate
Back cover board
EDC1070W/EDC1070M