Haier HWM40-32 User Manual
Haier HWM40-32 Manual
 |
View all Haier HWM40-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier HWM40-32 manual content summary:
- Haier HWM40-32 | User Manual - Page 1
Single-tub Washing Machine User's manual This manual is for HWM40-32 Please read this manual carefully before using. Retain it for future reference. - Haier HWM40-32 | User Manual - Page 2
Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing Put in the laundries Put in the detergent Select the wash time Close the top cover Finish washing Disposal after washing Trouble-shooting Packing list *Specification - Haier HWM40-32 | User Manual - Page 3
Names of the parts Top lid Filter cap Lint filter(Installed by user) Panel support Pulsator cabinet base Control panel water inlet timer knob handle power cord drain hose back cover fixing leg (four pieces) Meaning and description of the - Haier HWM40-32 | User Manual - Page 4
If the power cord is bad, to avoid risk it is required to replace it by the technicians ofour special shop or the after-sale service department. Keep the pin of the power plug clean. In case the washing machine is installed on ground with carpet , do not block the ventilation - Haier HWM40-32 | User Manual - Page 5
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing - Haier HWM40-32 | User Manual - Page 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. The drUaisnaaggeeshoalfl btehsemdoortahiwnithhothseedrain hose. 1.The height of the drain hose shall be less - Haier HWM40-32 | User Manual - Page 7
Adjust the installation position The largest permitted slope of the bearing surface of the washing machine is 2. Slanting or uneven ground will cause unstable operation of the machine. Please check with following methods: Hang a becket with weight to confirm if the washing machine is horizontal. - Haier HWM40-32 | User Manual - Page 8
Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Hang the drain hose up. Pay - Haier HWM40-32 | User Manual - Page 9
Put in the laundries Reference weight of the laundries: The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness , - Haier HWM40-32 | User Manual - Page 10
The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener,please Dosage of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. Select the wash - Haier HWM40-32 | User Manual - Page 11
clean soft cloth. Open the cover of the wash tub for some time (about one hour), then close it. Hang up the drain hose. Trouble-shooting The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. Phenomena How to check The washing machine does not - Haier HWM40-32 | User Manual - Page 12
Packing list Name User's manual Water inlet hose Lint filter Water-filling jointer Single-tub washing machine Quantity One piece One piece One piece One piece One set Specification Water
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
User's
manual
This manual is for
HWM40-32
Please read this manual
carefully before using.
Retain it for future reference.
Single-tub Washing Machine