Haier HWM95-113S User Manual

Haier HWM95-113S Manual

Haier HWM95-113S manual content summary:

  • Haier HWM95-113S | User Manual - Page 1
    Twin-tub Washing Machine Twin-tub Washing Machine User's manual User's manual This manual is for HWM95-113S Please read this manual carefully before using. Retain it for future reference. 0030806700B
  • Haier HWM95-113S | User Manual - Page 2
    Contents Names of the parts 1 Safety precautions 2 Installation and adjustment 4 Preparation before washing 7 The musts in washing 8 Usage of the detergent 8 Washing sequence 9 Disposal after washing 13 Trouble-Shooting *Answer to question 15 Packing list *Specification 17
  • Haier HWM95-113S | User Manual - Page 3
    Names of the parts Buzzer Water-filling entrance Water inlet selector handle Wash selector Wash timer Control panel Overflow filter Quick water-filling entrance Drain hose hook Water level adjusting lever Lint filter(Installed by user) Pulsator Wash tub Drain hose Wash tub cover Base frame Outer
  • Haier HWM95-113S | User Manual - Page 4
    machine is being moved, cleaned or when it is idle. If the supply cord is damaged,it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Do not put the machine at damp place like the bathroom . Never wash it with
  • Haier HWM95-113S | User Manual - Page 5
    Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing
  • Haier HWM95-113S | User Manual - Page 6
    Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package, please take out the lint
  • Haier HWM95-113S | User Manual - Page 7
    How to change the direction of the drain hoses Figure 1 indicates the ex factory installatio n positi on of the drain hose. Extend the drain hose from the side of spin tub. Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fix ing hook outwards gently to take out the
  • Haier HWM95-113S | User Manual - Page 8
    Install the water inlet hose; Select the water level Insert the water inlet hose into the water-filling entrance on the control pane directly.(pull it out to dismantle it) Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Water
  • Haier HWM95-113S | User Manual - Page 9
    Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting
  • Haier HWM95-113S | User Manual - Page 10
    prone to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. powder is different. Please refer to the instruction of the washing powder for the detail dosage. 8
  • Haier HWM95-113S | User Manual - Page 11
    selector handle Overfilling sign Wash timer (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). Wash selector Water-filling entrance Buzzer (Strong current, (The buzzer will ring when standard current) the washing finishes) Spin
  • Haier HWM95-113S | User Manual - Page 12
    Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin: (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper The laundries Proper No gland are slanting (2) Close the inner and outer cover of
  • Haier HWM95-113S | User Manual - Page 13
    Rinsing Rinse with water-filling 1.Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. OVERFILLOW If you
  • Haier HWM95-113S | User Manual - Page 14
    Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally
  • Haier HWM95-113S | User Manual - Page 15
    Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must
  • Haier HWM95-113S | User Manual - Page 16
    Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 4. Install the overflow filter. (1).
  • Haier HWM95-113S | User Manual - Page 17
    Trouble-shooting Answer to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of
  • Haier HWM95-113S | User Manual - Page 18
    Trouble-shooting Answer to question (If there's breakdown, please pull off the power to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason The machine does not
  • Haier HWM95-113S | User Manual - Page 19
    Packing list Name User's manual Water inlet hose Lint filter Water-filling jointer Gland Twin-tub washing machine Quantity One piece One piece One piece One piece One piece One set 17
  • Haier HWM95-113S | User Manual - Page 20
    Specification Water level/Water quantity (about) Maximum/55L Medium/46L Minimum/36L Injection pressure(Mpa) 0.02~0.2 Rated washing /spinning capacity(kg) 9.5/6.0 18
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20