Harbor Freight Tools 1108 User Manual

Harbor Freight Tools 1108 - Air Needle Scaler Manual

Get Harbor Freight Tools 1108 - Air Needle Scaler PDF manuals and user guides View all Harbor Freight Tools 1108 manuals
Add to My Manuals
Save this manual to your list of manuals

Harbor Freight Tools 1108 manual content summary:

  • Harbor Freight Tools 1108 | User Manual - Page 1
  • Harbor Freight Tools 1108 | User Manual - Page 2
    should always be followed, including the following: General To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. Work Area 1. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric
  • Harbor Freight Tools 1108 | User Manual - Page 3
    Use and care 1. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against condition that affects the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There
  • Harbor Freight Tools 1108 | User Manual - Page 4
    as an air source for the tool. Such gases are capable of explosion and serious injury to persons. SAVE THESE INSTRUcTIONS. Symbols and Specific Safety Instructions Symbol Definitions Symbol property or statement no No-load speed .../min Revolutions or reciprocation per minute pSI Pounds per
  • Harbor Freight Tools 1108 | User Manual - Page 5
    doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or maintain tool as explained in this manual. If abnormal vibration occurs, stop immediately. SAVE THESE INSTRUcTIONS. OpERATION MAINTENANcE Item 1108 For technical
  • Harbor Freight Tools 1108 | User Manual - Page 6
    SAFETy SETUp Functional Description Specifications Stroke Blows per minute Overall Length Average Air Consumption Air Inlet 1-1/8″ 4600 18″ 4 CFM @ 90 PSI 1/4″ -18 NPT components and controls Throttle (8) Driver Retainer (38) Needle Tube (49) Needle Holder (47) Needles (46) : Air Needle
  • Harbor Freight Tools 1108 | User Manual - Page 7
    product. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Note: This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before setup. Assembly 1. During shipment, some
  • Harbor Freight Tools 1108 | User Manual - Page 8
    other bottled gas as a power source for this tool. 1. Incorporate a filter, regulator with pressure gauge, oiler, in-line shutoff valve, and quick coupler for best service, as shown on Figure B on page 9 and Figure C on page 10. An in-line shutoff ball valve is an important safety device because it
  • Harbor Freight Tools 1108 | User Manual - Page 9
    Item 1108 Figure B: portable Air Supply Setup Lubricated Tools BC D A E F A For technical questions, please call 1-800-444-3353. Non-lubricated Tools C EH BG A Description A Air Hose B Filter C Regulator D Lubricator (optional) E Coupler and Plug F Leader Hose (optional) G Air Cleaner
  • Harbor Freight Tools 1108 | User Manual - Page 10
    SAFETy SETUp OpERATION MAINTENANcE Page 10 Figure c: Stationary Air Supply Setup Slope Lubricated G Tools C J K H L M F CD E For technical questions, please call 1-800-444-3353. I IN B A B A F C J F Non-lubricated Tools LO H Description A Vibration Pads B Anchor Bolts C
  • Harbor Freight Tools 1108 | User Manual - Page 11
    SETUp Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before setup or use of this product. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found
  • Harbor Freight Tools 1108 | User Manual - Page 12
    SAFETy General Operating Instructions 1. If an automatic oiler is not used, add a few drops of Pneumatic Tool Oil to the airline connection before use. Add a few drops more after
  • Harbor Freight Tools 1108 | User Manual - Page 13
    instructions. Maintain the lubricator's oil level. Drain the moisture filter regularly. Performing routine air supply maintenance will allow the tool to operate more safely and will also reduce wear on the tool. Troubleshooting problem or servicing the tool. Disconnect air supply before service.
  • Harbor Freight Tools 1108 | User Manual - Page 14
    parts List and Diagram pLEASE READ THE FOLLOWING cAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
  • Harbor Freight Tools 1108 | User Manual - Page 15
    Assembly Diagram Item 1108 For technical questions, please call 1-800-444-3353. 33 32 3130 29 28 11 1 41 39 38 40 49 36 35 37 48 47 46 8 9 10 2 3 4 5 6 45 7 Page 15 MAINTENANcE OpERATION SETUp SAFETy
  • Harbor Freight Tools 1108 | User Manual - Page 16
    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16