Harbor Freight Tools 39955 User Manual

Harbor Freight Tools 39955 - 20 in. Floor Mount Drill Press Manual

Get Harbor Freight Tools 39955 - 20 in. Floor Mount Drill Press PDF manuals and user guides View all Harbor Freight Tools 39955 manuals
Add to My Manuals
Save this manual to your list of manuals

Harbor Freight Tools 39955 manual content summary:

  • Harbor Freight Tools 39955 | User Manual - Page 1
  • Harbor Freight Tools 39955 | User Manual - Page 2
    6 Setup 6 Operation 9 Maintenance 12 Parts Lists and Diagrams 14 Warranty 20 SAFETy SETUp Safety Warnings Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and please call 1-888-866-5797. Item 39955 MAINTENANcE
  • Harbor Freight Tools 39955 | User Manual - Page 3
    operate tool. 14. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. 15. DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits, cutters, and the like. 16. REDUCE THE RISK OF
  • Harbor Freight Tools 39955 | User Manual - Page 4
    tool to a different outlet. Drill press Safety Warnings For your Own Safety Read Instruction Manual Before Operating Drill press 1. Wear eye protection. a risk of injury to persons. 8. When servicing use only identical replacement parts. 9. Do not depress the spindle lock when 39955 MAINTENANcE
  • Harbor Freight Tools 39955 | User Manual - Page 5
    SETUp Drill press Safety and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women in this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE INSTRUcTIONS. OpERATION MAINTENANcE Item 39955 For technical
  • Harbor Freight Tools 39955 | User Manual - Page 6
    parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Mounting Secure the tool to a supporting structure before use. Before assembly, bolt the Base to a flat, level, solid floor location capable of supporting the weight of the drill press 39955 MAINTENANcE
  • Harbor Freight Tools 39955 | User Manual - Page 7
    into the Table Support and extend the Shaft as possible to the Support, and then tighten Support (3B). Engage the Rack into the Gear Mechanism Column Support. into the Table Support. Once inserted, Support as possible. Tighten the Set Screw Table Support. using the Handle. Press the Chuck nose
  • Harbor Freight Tools 39955 | User Manual - Page 8
    Oil Bottle with Spigot Assembly (52A, 53A) into the Oil Brackets. Features SETUp OpERATION MAINTENANcE Page 8 For technical questions, please call 1-888-866-5797. Item 39955
  • Harbor Freight Tools 39955 | User Manual - Page 9
    SETUp Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all Depth Setting The Drill is now set to drill holes to your predetermined depth from that particular starting point. OpERATION MAINTENANcE Item 39955 For technical
  • Harbor Freight Tools 39955 | User Manual - Page 10
    drill press operation are: a. Type of material to be drilled b. Size of hole c. Type of drill bit d. Quality of the hole or cut desired. Generally, the SMALLER THE DRILL BIT the GREATER THE REQUIRED RPM. In soft material, the speed should be higher than for hard metals. As a guide, the drill speed
  • Harbor Freight Tools 39955 | User Manual - Page 11
    c: Bracing workpiece against column General Operating Instructions 1. Bring the drill bit down with the Feed Knob to where the hole is to be drilled. Make minor workpiece alignment adjustments. 2. Plug the Power Cord into an electrical outlet. 3. Turn the Drill Press on. 4. Pull down on the Feed
  • Harbor Freight Tools 39955 | User Manual - Page 12
    Servicing procedures not specifically explained in this manual problem parts, • cracked or broken parts service technician. Belt Inspection and Tensioning 1. Examine belt for cracks, tears in the backing, and other damage. 2. Replace belt if damaged, following the instructions under Changing Drill
  • Harbor Freight Tools 39955 | User Manual - Page 13
    SAFETy Troubleshooting problem possible (if equipped). 3. Turn off tool and allow to cool. Press reset button on tool. Tool operates slowly. 4. Internal damage or diagnosing or servicing the tool. Disconnect power supply before service. SETUp OpERATION MAINTENANcE Item 39955 For technical
  • Harbor Freight Tools 39955 | User Manual - Page 14
    FOLLOWING cAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR 1 1 1 1 1 1 1 1 1 1 SETUp OpERATION MAINTENANcE Page 14 For technical questions, please call 1-888-866-5797. Item 39955
  • Harbor Freight Tools 39955 | User Manual - Page 15
    : Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 39955 For technical questions, please call 1-888-866-5797. Page 15 MAINTENANcE
  • Harbor Freight Tools 39955 | User Manual - Page 16
    Support 13A Motor Adjusting Knob 14A Belt Tension Handle 15A Screw-Soc Set M10 16A Lock Depth Screw 17A Guide -Scale 18A Knob 19A Rod 20A Hub 21A Ring/Depth Stop w/Scale 22A Stop-Pin 24A Lock Washer 25A Screw Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 part 5797. Item 39955
  • Harbor Freight Tools 39955 | User Manual - Page 17
    6B Rack 7B Screw-hex Soc Set 8B Column Support 9B Screw 10B Base 11B Column-Tube 12B Table Lock Pin Qty part Description 1 13B Nut-hex M8 1 14B Hex 1 1 1 1 1 1 1 1 SETUp OpERATION MAINTENANcE 20 21 22 23 24 Item 39955 For technical questions, please call 1-888-866-5797. Page 17
  • Harbor Freight Tools 39955 | User Manual - Page 18
    Motor Wiring Diagram SAFETy SETUp OpERATION MAINTENANcE Page 18 For technical questions, please call 1-888-866-5797. Item 39955
  • Harbor Freight Tools 39955 | User Manual - Page 19
    power and Light Switch Wiring Diagram SAFETy SETUp OpERATION MAINTENANcE Item 39955 For technical questions, please call 1-888-866-5797. Page 19
  • Harbor Freight Tools 39955 | User Manual - Page 20
    LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20