Harbor Freight Tools 43468 User Manual
Harbor Freight Tools 43468 - 12in. Direct Drive Bench Top Disc Sander Manual
 |
View all Harbor Freight Tools 43468 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 43468 manual content summary:
- Harbor Freight Tools 43468 | User Manual - Page 1
Instructions Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save this manual within this manual may not - Harbor Freight Tools 43468 | User Manual - Page 2
depending on variations in local line voltage. Extension cord usage may also affect tool performance. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this - Harbor Freight Tools 43468 | User Manual - Page 3
tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, and refrigerator enclosures. 17. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts - Harbor Freight Tools 43468 | User Manual - Page 4
reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) 26. The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common - Harbor Freight Tools 43468 | User Manual - Page 5
Operation Leveling Work Table 1. Place a combination square on the Work Table (46) so that it also touches the Sanding Pad (1). Refer to the photos that follow. When the Work Table is 90 degrees to the Sanding Pad, the square is flush on the pad. 2. If the Work Table is not 90 degrees to the pad, - Harbor Freight Tools 43468 | User Manual - Page 6
when its paper backing begins to tear. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR - Harbor Freight Tools 43468 | User Manual - Page 7
Parts List Part 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20a 21 22 23 24 25 26 27 28 29 30 31 32 33 34 37 38 39 40 41 42 Description Sanding Pad Cross Countersunk Screw, M6x20 Washer Disc Plate Cross Panhead Screw, M5x20 Spring Washer, 5 Lock Knob Bolt Adjusting Pin Disc Plate Housing Wave - Harbor Freight Tools 43468 | User Manual - Page 8
Assembly Drawing SKU 43468 For technical questions, please call 1-800-444-3353. REV 09b Page 8
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
DISC SANDER - 12 INCH
43468
SET UP AND OPERATING INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2000 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual
product may differ slightly from the product described herein.
Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Cover Revised 09b