Harbor Freight Tools 60244 User Manual

Harbor Freight Tools 60244 - 1/8in. Air Micro Die Grinder Manual

Get Harbor Freight Tools 60244 - 1/8in. Air Micro Die Grinder PDF manuals and user guides View all Harbor Freight Tools 60244 manuals
Add to My Manuals
Save this manual to your list of manuals

Harbor Freight Tools 60244 manual content summary:

  • Harbor Freight Tools 60244 | User Manual - Page 1
  • Harbor Freight Tools 60244 | User Manual - Page 2
    should always be followed, including the following: General To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. Work Area 1. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric
  • Harbor Freight Tools 60244 | User Manual - Page 3
    Use and Care 1. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against condition that affects the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There
  • Harbor Freight Tools 60244 | User Manual - Page 4
    be performed only by qualified repair personnel. 2. When servicing a tool, use only identical replacement parts. Use only of explosion and serious injury to persons. SAVE THESE INSTRUCTIONS. Symbols and Specific Safety Instructions Symbol Definitions Symbol Property or statement no No-load
  • Harbor Freight Tools 60244 | User Manual - Page 5
    doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or maintain tool as explained in this manual. If abnormal vibration occurs, stop immediately. SAVE THESE INSTRUCTIONS. Operation Maintenance Item 60244 For
  • Harbor Freight Tools 60244 | User Manual - Page 6
    Safety Setup Functional Description Specifications Maximum Air Pressure Air Inlet Rated Speed* Average Air Consumption Collet Size 90 PSI 1/4"-18 NPT 56,000 RPM 2 CFM @ 90 PSI 1/8" * Rated speed at stated maximum air pressure. Excess air pressure is hazardous and may cause the tool to exceed
  • Harbor Freight Tools 60244 | User Manual - Page 7
    the following pages, refer to the Assembly Diagram near the end of this manual. Note: This air tool may be shipped with a protective plug covering with pressure gauge, oiler, in-line shutoff valve, and quick coupler for best service, as shown on Figure B on page 8 and Figure C on page 9.
  • Harbor Freight Tools 60244 | User Manual - Page 8
    Safety Setup Operation Maintenance Page 8 Figure B: Portable Air Supply Setup Lubricated Tools BC D A E F A For technical questions, please call 1-800-444-3353. Non-lubricated Tools C EH BG A Description A Air Hose B Filter C Regulator D Lubricator (optional) E Coupler and Plug F
  • Harbor Freight Tools 60244 | User Manual - Page 9
    Figure C: Stationary Air Supply Setup Item 60244 For technical questions, please call 1-800-444-3353. Slope Lubricated G Tools C J K H L M F CD E I IN B A B A F C J F Non-lubricated Tools LO H Description A Vibration Pads B Anchor Bolts C Ball Valve D Isolation Hose E Main
  • Harbor Freight Tools 60244 | User Manual - Page 10
    Setup Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found
  • Harbor Freight Tools 60244 | User Manual - Page 11
    Safety General Operating Instructions 1. If an automatic oiler is not used, add a few drops of pneumatic tool oil to the airline connection before use. Add a few drops more after
  • Harbor Freight Tools 60244 | User Manual - Page 12
    Safety User‑Maintenance Instructions Procedures not specifically explained in this manual must be performed only by a qualified . If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication Note: These procedures
  • Harbor Freight Tools 60244 | User Manual - Page 13
    Safety Troubleshooting Problem Possible Causes Likely Solutions Decreased output. 1. Not valve assembly. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Setup Operation Maintenance Item 60244 For technical questions, please
  • Harbor Freight Tools 60244 | User Manual - Page 14
    Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
  • Harbor Freight Tools 60244 | User Manual - Page 15
    Assembly Diagram Safety Setup Operation Maintenance Item 60244 For technical questions, please call 1-800-444-3353. Page 15
  • Harbor Freight Tools 60244 | User Manual - Page 16
    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16