Harbor Freight Tools 61790 User Manual
Harbor Freight Tools 61790 - 70 gal. 2 HP Industrial Dust Collector Manual
 |
View all Harbor Freight Tools 61790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 61790 manual content summary:
- Harbor Freight Tools 61790 | User Manual - Page 1
manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com Email our technical support slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product - Harbor Freight Tools 61790 | User Manual - Page 2
should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE To reduce the risk of fire, electric shock, or injury: 1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. 2. Do not use outdoors or on wet surfaces - Harbor Freight Tools 61790 | User Manual - Page 3
et seq.) 23. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly - Harbor Freight Tools 61790 | User Manual - Page 4
pages, refer to the Assembly Diagram near the end of this manual. Assembly 1. Place Caster (39) in place on the underside corner Bolt down through Washers and Base Plate and secure in place with Nut. Motor (27) Collector Support (29) Bolt (16) Bolt (16) Base Plate (40) Figure A Motor Base ( - Harbor Freight Tools 61790 | User Manual - Page 5
. Press the clamp down to lock in place. Extend the bag so that Washers (21) the loop on the top hangs on the Filter Bag Support. Nuts (2) Fan Housing (17) 11. Place the Collection Bag (37) on the bottom of the Collector and secure it with Clamp (31). Figure D 12. Attach - Harbor Freight Tools 61790 | User Manual - Page 6
Functions Safety Setup Operation Filter Bag Hose Fan Housing Collector Collection Bag Y-Inlet Page 6 Caster For technical questions, please call 1-888-866-5797. Item 61790 Maintenance - Harbor Freight Tools 61790 | User Manual - Page 7
Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up Safety TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: - Harbor Freight Tools 61790 | User Manual - Page 8
specifically explained in this manual must be performed abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, is damaged, it must be replaced only by a qualified service technician. Cleaning Filter To ensure proper operation, clean the Filter - Harbor Freight Tools 61790 | User Manual - Page 9
Safety Troubleshooting Problem Possible Causes Tool will not start. 1. Cord not connected. 2. No make sure circuit is right capacity for tool and circuit has no other loads. 3. Have technician service tool. Eliminate use of extension cord. If an extension cord is needed, use one with the proper - Harbor Freight Tools 61790 | User Manual - Page 10
HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR 27 Motor 1 28 Bolt M8x25 1 29 Collector Support 17 30 Collector 1 31 Filter Clamp 1 32 Filter Bag 4 33 Filter Bag Support 4 34 Hand Shank 26 35 Screw M8x20 22 - Harbor Freight Tools 61790 | User Manual - Page 11
Maintenance Operation Setup Safety Page 11 33 For technical questions, please call 1-888-866-5797. 32 16 15 31 24 14 23 30 22 34 25 26 27 28 16 15 14 29 16 15 14 29 23 21 35 20 19 18 17 36 16 31 15 14 13 29 12 11 16 10 16 9 8 15 15 7 6 15 14 16 36 15 14 41 14 - Harbor Freight Tools 61790 | User Manual - Page 12
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
REV 14h
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures.
Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2014 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.