Harbor Freight Tools 61808 User Manual
Harbor Freight Tools 61808 - 13 gal. 1 HP Industrial Portable Dust Collector Manual
 |
View all Harbor Freight Tools 61808 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 61808 manual content summary:
- Harbor Freight Tools 61808 | User Manual - Page 1
manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com Email our technical support slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product - Harbor Freight Tools 61808 | User Manual - Page 2
should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE To reduce the risk of fire, electric shock, or injury: 1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. 2. Do not use outdoors or on wet surfaces - Harbor Freight Tools 61808 | User Manual - Page 3
et seq.) 24. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly - Harbor Freight Tools 61808 | User Manual - Page 4
Flow 660 CFM Hose Inlet/Outlet Diameter 4" OD Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the - Harbor Freight Tools 61808 | User Manual - Page 5
Safety Setup Collector Body 1. Insert the Outlet Gasket (15) between the Collector Body (16) and the Outlet (14) and secure using six M6x20 Bolts (12). See Figure B. M6x20 Bolts (12) Collector Body (16) 2. Fit the Collection Bag (10) over the outlet port and secure it with the Clamp (11), as - Harbor Freight Tools 61808 | User Manual - Page 6
Safety Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make - Harbor Freight Tools 61808 | User Manual - Page 7
Safety Vacuum (Dust Collector) Operation TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Switch off and unplug the power cord from its electrical outlet before removing the Power Head. Do not tamper with or remove the grounding pole on the plug. You must use this unit with a 3 pole - Harbor Freight Tools 61808 | User Manual - Page 8
specifically explained in this manual must be performed only If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication must be replaced only by a qualified service technician. Setup Operation Maintenance Page 8 For technical questions, - Harbor Freight Tools 61808 | User Manual - Page 9
Safety Setup Troubleshooting Problem Possible Causes Likely Solutions Machine does not start or a breaker trips for tool and circuit has no other loads. 3. Internal damage or wear. 3. Have technician service tool. 4. Switch key removed. Machine vibrates 1. Motor or component is loose. or is - Harbor Freight Tools 61808 | User Manual - Page 10
THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER Gasket 1 23 Rubber Gasket 8 24 Lock Washer 8 20 25 Motor Bracket 1 26 Acorn Nut M8 1 27 Support Plate 8 28 Nut M8 14 29 Frame 1 30 Bolt M8×30 1 31 Caster (With Brake) 1 32 - Harbor Freight Tools 61808 | User Manual - Page 11
Safety Setup Assembly Diagram 19 18 15 20 12 5 21 13 22 13 16 17 10 11 12 13 14 8 23 24 9 25 26 24 9 27 9 28 29 9 24 30 27 28 31 9 8 26 24 9 30 24 9 7 6 5 4 3 1 2 1 28 32 Operation Maintenance Item 61808 For technical questions, please call 1-888-866-5797. Page 11 - Harbor Freight Tools 61808 | User Manual - Page 12
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
REV 14i
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures.
Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2014 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.