Harbor Freight Tools 62556 User Manual

Harbor Freight Tools 62556 - 4-1/2 in. 7 Amp Small Angle Grinder Manual

Get Harbor Freight Tools 62556 - 4-1/2 in. 7 Amp Small Angle Grinder PDF manuals and user guides View all Harbor Freight Tools 62556 manuals
Add to My Manuals
Save this manual to your list of manuals

Harbor Freight Tools 62556 manual content summary:

  • Harbor Freight Tools 62556 | User Manual - Page 1
    Model HE61S Owner's Manual & Safety Instructions REV 16l 4-1/2" Heavy Duty Angle Grinder WARNING: To prevent serious injury, User must read and understand Owner's Manual. SAVE THIS MANUAL. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken,
  • Harbor Freight Tools 62556 | User Manual - Page 2
    GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term ″power tool″ in the warnings refers
  • Harbor Freight Tools 62556 | User Manual - Page 3
    and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands those intended could result in a hazardous situation. Service Have your power tool serviced by a qualified repair person using only identical replacement
  • Harbor Freight Tools 62556 | User Manual - Page 4
    21. Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against seq.) 26. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that
  • Harbor Freight Tools 62556 | User Manual - Page 5
    may cause them to shatter. 4. Always use undamaged wheel flanges that are of correct size and shape for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel flanges. 5. Do not use
  • Harbor Freight Tools 62556 | User Manual - Page 6
    regular medical check-ups to ensure medical problems are not being caused or worsened in this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Grounded is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit
  • Harbor Freight Tools 62556 | User Manual - Page 7
    14 12 10 - - 16.1 - 20.0 12 10 - - - * Based on limiting the line voltage drop to five volts at 150% of the rated amperes. Read the manual before set-up and/or use. WARNING marking concerning Risk of Hearing Loss. Wear hearing protection. WARNING marking concerning Risk of Fire. Do not cover
  • Harbor Freight Tools 62556 | User Manual - Page 8
    4. Wheel Guard 5. Wheel Guard Bolt 6. Wheel Guard Lock Lever 3 4 OPERATION Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
  • Harbor Freight Tools 62556 | User Manual - Page 9
    Installing a Non-threaded Grinding Wheel or Cut-Off Wheel 1. For a Grinding Wheel, it MUST be: • rated to at least 11,000 RPM • no larger than 4-1/2" in diameter • fitted with a 7/8" round arbor hole • from 0.16" to 0.28" thick • a type of grinding wheel suitable for surface grinding, not edge
  • Harbor Freight Tools 62556 | User Manual - Page 10
    Installing a Threaded Accessory General Operation TO PREVENT INJURY: Wear heavy-duty work gloves when handling wire wheels and brushes. These accessories are sharp and can cause injury. Do not exceed maximum rated speed of brush. Do not use a damaged brush. Replace damaged brushes immediately.
  • Harbor Freight Tools 62556 | User Manual - Page 11
    MAINTENANCE AND SERVICING Procedures not specifically explained in this manual must be performed only by a power tool is damaged, it must be replaced only by a qualified service technician. Troubleshooting Problem Tool will not start. Tool operates slowly. Performance decreases over time.
  • Harbor Freight Tools 62556 | User Manual - Page 12
    http://www.harborfreight.com Email our technical support at: [email protected] For technical ®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
4-1/2" Heavy Duty Angle Grinder
Model
HE61S
WARNING:
To prevent serious injury,
User must read and
understand Owner’s Manual.
SAVE THIS MANUAL
.
When unpacking, make sure that the product is intact and
undamaged.
If any parts are missing or broken, please call
1-888-866-5797 as soon as possible.
Reference
62556.
Owner’s Manual &
Safety Instructions
REV 16l