Harbor Freight Tools 62750 User Manual
Harbor Freight Tools 62750 - Heavy Duty Mobile Miter Saw Stand Manual
 |
View all Harbor Freight Tools 62750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 62750 manual content summary:
- Harbor Freight Tools 62750 | User Manual - Page 1
Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual Tools required for assembly and service may not be included. - Harbor Freight Tools 62750 | User Manual - Page 2
INSTRUCTIONS AND SAFETY PRECAUTIONS AS OUTLINED IN THE MANUFACTURER'S MANUAL OF THE MITER SAW THAT IS TO BE USED. 2. MAKE SURE THE MITER SAW STAND IS PLACED ON A FLAT, LEVEL, HARD SURFACE CAPABLE OF SUPPORTING ITS ELECTRICAL SUPPLY SOURCE BEFORE PERFORMING ANY SERVICE OR MAINTENANCE ON THE MITER SAW - Harbor Freight Tools 62750 | User Manual - Page 3
et seq.) 18. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people - Harbor Freight Tools 62750 | User Manual - Page 4
kg) 118" 58-1/2" L x 13" W x 13" H 7-3/4" 47 lb Setup - Before Use Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in - Harbor Freight Tools 62750 | User Manual - Page 5
a protective Stainless Steel Plate (31) with the hole facing out onto the bracket at the end of the Extension Arm (2). Then insert the Workpiece Support (F) into the same bracket. Thread a Lock Knob (10) into the bracket and tighten to secure in place. 3. Repeat the procedure described in Step 2 at - Harbor Freight Tools 62750 | User Manual - Page 6
Safety Setup 9. Adjust the position of the Carriage Bolts on the Mounting Brackets and the position of the Mounting Brackets on the Saw Stand to align with mounting holes on the miter saw base. CAUTION! Make sure the miter saw (not included) is unplugged from its electrical power supply source - Harbor Freight Tools 62750 | User Manual - Page 7
Safety Components and Controls Workpiece Support Locking Handle Lock Knob Locking Button Main Frame Extension Arm Workpiece Support Lock Knob Handle Lock Pin Mounting Brackets Adjustable Foot Workpiece Stop Extension Arm Setup Operation Maintenance Item 62750 For technical - Harbor Freight Tools 62750 | User Manual - Page 8
Operation TO PREVENT SERIOUS INJURY: Read the miter saw manufacturer's instruction manual before use. Ensure that the miter saw is firmly secured to its engaged position. Refer to Figure J. 2. Position the Workpiece Support at the desired length setting by extending or retracting the Extension Arm - Harbor Freight Tools 62750 | User Manual - Page 9
Setup Maintenance Procedures not specifically explained in this manual must be performed only by a qualified FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. 1. BEFORE EACH USE, inspect the general condition of the Miter - Harbor Freight Tools 62750 | User Manual - Page 10
DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES Description 1 Main Frame 2 Extension Arm 3 Right Workpiece Support 4 Left Workpiece Support 5 Right Mounting Bracket 6 Leftt Mounting Bracket 7 - Harbor Freight Tools 62750 | User Manual - Page 11
Assembly Diagram Item 62750 For technical questions, please call 1-888-866-5797. 51 56 55 21 21 21 56 57 51 55 54 19 5 22 47 20 57 51 55 54 21 6 19 18 23 15 56 57 54 21 21 20 20 17 16 37 14 12 20 13 22 16 15 24 B 22 11 20 14 15 23 24 18 22 51 50 51 47 E 39 16 16 12 13 A - Harbor Freight Tools 62750 | User Manual - Page 12
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
HEAVY DUTY MOBILE
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures.
Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2015 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15l