Harbor Freight Tools 63075 User Manual
Harbor Freight Tools 63075 - 22 in. Electric Hedge Trimmer Manual
 |
View all Harbor Freight Tools 63075 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 63075 manual content summary:
- Harbor Freight Tools 63075 | User Manual - Page 1
manual and the receipt in a safe and dry place for future reference. REV 16e Visit our website at: http://www.harborfreight.com Email our technical support slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this - Harbor Freight Tools 63075 | User Manual - Page 2
, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: READ ALL INSTRUCTIONS Power Cord Safety WARNING! - To reduce the risk of electric shock, use only with an extension cord intended for outdoor use, such as - Harbor Freight Tools 63075 | User Manual - Page 3
Safety Setup 3. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. The appliance plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the - Harbor Freight Tools 63075 | User Manual - Page 4
instructions for lubricating and changing accessories. Inspect appliance cord periodically, and if damaged, have it repaired by an authorized service medical check-ups to ensure medical problems are not being caused or the appliance as explained in this manual. If any abnormal vibration occurs, - Harbor Freight Tools 63075 | User Manual - Page 5
stop completely and unplug it before putting the appliance down, making any adjustments, or servicing the appliance. 2. Do not use in rain, snow, sprinklers, or wet 10. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and - Harbor Freight Tools 63075 | User Manual - Page 6
Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual including all text under subheadings parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Assembly Install Guard 1. Slide tabs on Guard (32) into slots on the sides of - Harbor Freight Tools 63075 | User Manual - Page 7
Safety Setup Functions Safety Switch Front Handle Guard Trigger Handle Power Connector Cord Hook Blade Trigger and Safety Switch: To increase safety, these have to be used together to activate the Trimmer. The Safety Switch has to be squeezed first to allow the Trigger to operate. Keep your - Harbor Freight Tools 63075 | User Manual - Page 8
Safety Setup Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Using Cord Hook 1. An extension cord (sold separately) will be required. - Harbor Freight Tools 63075 | User Manual - Page 9
Safety Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. BEFORE EACH USE, inspect - Harbor Freight Tools 63075 | User Manual - Page 10
DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES Tapping Screw 14 Linkage Bar 15 Big Head Tapping Screw 16 Motor Support Assembly 17 Tapping Screw 18 Tapping Screw 19 Front Motor Cover 20 Stator - Harbor Freight Tools 63075 | User Manual - Page 11
Assembly Diagram Safety Setup Operation Maintenance Record Product's Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement - Harbor Freight Tools 63075 | User Manual - Page 12
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures.
Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2016 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 16e