Harbor Freight Tools 63534 User Manual
Harbor Freight Tools 63534 - 1/2 in. Stubby Extreme Torque Air Impact Wrench Manual
 |
View all Harbor Freight Tools 63534 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 63534 manual content summary:
- Harbor Freight Tools 63534 | User Manual - Page 1
manual and the receipt in a safe and dry place for future reference. 1177j j Visit our website at: http://www.harborfreight.com Email our technical support slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this - Harbor Freight Tools 63534 | User Manual - Page 2
should always be followed, including the following: General To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. Work Area 1. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric - Harbor Freight Tools 63534 | User Manual - Page 3
Use and care 1. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against condition that affects the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There - Harbor Freight Tools 63534 | User Manual - Page 4
as an air source for the tool. Such gases are capable of explosion and serious injury to persons. SAVE THESE INSTRUcTIONS. Symbols and Specific Safety Instructions Symbol Definitions Symbol property or statement no No-load speed .../min Revolutions or reciprocation per minute pSI Pounds per - Harbor Freight Tools 63534 | User Manual - Page 5
doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or maintain tool as explained in this manual. If abnormal vibration occurs, stop immediately. SAVE THESE INSTRUcTIONS. OpERATION MAINTENANcE Item 63534 For - Harbor Freight Tools 63534 | User Manual - Page 6
SAFETy Functional Description Specifications Maximum Air Pressure Air Inlet Average Air Consumption Drive Size components and controls Anvil 90 PSI 1/4"- 18 NPT 5.8 CFM @ 90 PSI 1/2" SETUp OpERATION Trigger Page 6 Regulator Wheel Switch Air Inlet For technical questions, please call 1-888- - Harbor Freight Tools 63534 | User Manual - Page 7
the following pages, refer to the Assembly Diagram near the end of this manual. Note: This air tool may be shipped with a protective plug covering with pressure gauge, oiler, in-line shutoff valve, and quick coupler for best service, as shown on Figure A on page 8 and Figure B on page 9. - Harbor Freight Tools 63534 | User Manual - Page 8
SAFETy SETUp OpERATION MAINTENANcE Page 8 Figure A: portable Air Supply Setup Lubricated Tools Bc D A E F A For technical questions, please call 1-888-866-5797. Non-lubricated c Tools EH BG A Description A Air Hose B Filter C Regulator D Lubricator (optional) E Coupler and Plug F - Harbor Freight Tools 63534 | User Manual - Page 9
Item 63534 For technical questions, please call 1-888-866-5797. Figure B: Stationary Air Supply Setup Slope Lubricated G Tools c J K H L M F cD E I IN B B c J LO A A F F Non-lubricated Tools H Description A Vibration Pads B Anchor Bolts C Ball Valve D Isolation Hose E Main - Harbor Freight Tools 63534 | User Manual - Page 10
SAFETy Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do - Harbor Freight Tools 63534 | User Manual - Page 11
SAFETy General Operating Instructions 1. If an automatic oiler is not used, add a few drops of Pneumatic Tool Oil to the airline connection before use. Add a few drops more after - Harbor Freight Tools 63534 | User Manual - Page 12
SAFETy SETUp User-Maintenance Instructions procedures not specifically explained in this manual must be performed only by a equipment. If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use. TO pREVENT SEROUS INJURy FROM EXpLOSION: Lubricate the - Harbor Freight Tools 63534 | User Manual - Page 13
SAFETy Troubleshooting problem possible causes Likely Solutions Decreased output. 1. Not enough air needed. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. SETUp OpERATION MAINTENANcE Item 63534 For technical questions, - Harbor Freight Tools 63534 | User Manual - Page 14
parts List and Diagram pLEASE READ THE FOLLOWING cAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR - Harbor Freight Tools 63534 | User Manual - Page 15
Diagram SAFETy SETUp OpERATION MAINTENANcE Item 63534 For technical questions, please call 1-888-866-5797. Page 15 - Harbor Freight Tools 63534 | User Manual - Page 16
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures.
Write the product’s serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
17j
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2017 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures.
Write the product’s serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
17j
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2017 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.