Harbor Freight Tools 63634 User Manual
Harbor Freight Tools 63634 - 20 Volt 6-1/2 in. Cordless Circular Saw Manual
 |
View all Harbor Freight Tools 63634 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 63634 manual content summary:
- Harbor Freight Tools 63634 | User Manual - Page 1
manual and the receipt in a safe and dry place for future reference. 17d Visit our website at: http://www.harborfreight.com Email our technical support slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this - Harbor Freight Tools 63634 | User Manual - Page 2
injury. Addresses practices not related to personal injury. IMpORTANT SAFETy INFORMATION General power Tool Safety Warnings Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and - Harbor Freight Tools 63634 | User Manual - Page 3
tool accidentally. 4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. 5. Maintain power tools. check for misalignment or binding of - Harbor Freight Tools 63634 | User Manual - Page 4
cause irritation or burns. Service Have your power tool serviced by a qualified repair to a stable platform. It is important to support the work properly to minimize body exposure, blade When ripping always use a rip fence or straight edge guide. This improves the accuracy of cut and reduces the - Harbor Freight Tools 63634 | User Manual - Page 5
spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged of debris. 12. Lower guard should be retracted manually only for special cuts such as ″plunge cuts″ and of the saw base on the larger, supported part of the workpiece. This will - Harbor Freight Tools 63634 | User Manual - Page 6
other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) 31. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that - Harbor Freight Tools 63634 | User Manual - Page 7
have regular medical check-ups to ensure medical problems are not being caused or worsened from this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE INSTRUcTIONS. is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the - Harbor Freight Tools 63634 | User Manual - Page 8
Specifications Battery Bauer 20 V Li-ion (sold separately) No Load Speed 4000 RPM Maximum Blade Diameter 6-1/2″ (165mm) Arbor 5/8″ round SAFETy SETUp OpERATION MAINTENANcE Page 8 For technical questions, please call 1-888-866-5797. Item 63634 - Harbor Freight Tools 63634 | User Manual - Page 9
SAFETy SETUp Setup - Before Use: Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following - Harbor Freight Tools 63634 | User Manual - Page 10
SAFETy SETUp Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all blades. Battery charging Charge battery before using this tool. Follow instructions included with battery charger. Mounting and Removing Blade 1. Remove Blade - Harbor Freight Tools 63634 | User Manual - Page 11
must not be objects, such as utility lines, nearby that will present a hazard while working. This is especially critical for plunge cuts. General Operating Instructions 1. Make sure that the Trigger is locked, then attach the Battery Pack. 2. Make sure that all guards are in place and in proper - Harbor Freight Tools 63634 | User Manual - Page 12
Servicing procedures not specifically explained in this manual abnormal noise or vibration occurs, have the problem corrected before further use. cleaning, Maintenance, surfaces of the tool with clean cloth. 3. For blade changing instructions see Tool Set Up on page 10. 4. Disconnect battery pack - Harbor Freight Tools 63634 | User Manual - Page 13
SAFETy Troubleshooting problem Tool will not start. Tool operates slowly. Performance decreases Pack properly or recycle. Replace Battery Pack. 4. Internal damage or wear. (Carbon 4. Have technician service tool. brushes or Trigger, for example.) 1. Forcing tool to work too fast. 1. Allow tool - Harbor Freight Tools 63634 | User Manual - Page 14
parts List and Diagram pLEASE READ THE FOLLOWING cAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR - Harbor Freight Tools 63634 | User Manual - Page 15
Assembly Diagram SAFETy SETUp OpERATION MAINTENANcE Item 63634 For technical questions, please call 1-888-866-5797. Page 15 - Harbor Freight Tools 63634 | User Manual - Page 16
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures.
Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
17d
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2017 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.