Harbor Freight Tools 69091 User Manual
Harbor Freight Tools 69091 - 21 gal. 2-1/2 HP 125 PSI Cast Iron Vertical Air Compressor Manual
 |
View all Harbor Freight Tools 69091 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 69091 manual content summary:
- Harbor Freight Tools 69091 | User Manual - Page 1
manual and the receipt in a safe and dry place for future reference. reV 15g Visit our website at: http://www.harborfreight.com email our technical support slightly from the product described herein. Tools required for assembly and service may not be included. read this material before using this - Harbor Freight Tools 69091 | User Manual - Page 2
Safety Table of Contents Important Safety Information 2 Setup 6 Specifications 6 Operation 10 Maintenance and Servicing 12 Parts List and Diagram 16 Warranty 20 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to - Harbor Freight Tools 69091 | User Manual - Page 3
warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover intended could result in a hazardous situation. 5. Service a. Have your compressor serviced by a qualified repair person using only identical replacement - Harbor Freight Tools 69091 | User Manual - Page 4
of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) SAVE THESE INSTRUCTIONS. Operation Maintenance Page 4 For technical questions, please call 1-888-866-5797. ITEM 69091 - Harbor Freight Tools 69091 | User Manual - Page 5
cord or plug is necessary, do not connect the equipmentgrounding conductor to a live terminal. 4. Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded. 5. Use only 3-wire - Harbor Freight Tools 69091 | User Manual - Page 6
Sound Level SAE 30W, non-detergent, Air Compressor Oil (sold separately) 93.5 dB @ 3′ 218549 instructions for putting into use read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product - Harbor Freight Tools 69091 | User Manual - Page 7
C on page 8 and Figure D on page 9. Consult your air tool's manual for needed accessories. Checking the Oil 1. Check the oil level before operation. Fill which oil to use for this compressor, call Harbor Freight Tools customer service at 1-888-866-5797 for assistance. 5. Change the compressor oil - Harbor Freight Tools 69091 | User Manual - Page 8
Safety Setup Operation Maintenance Page 8 Figure C: Portable Air Supply Setup Lubricated Tools BC D A E F A For technical questions, please call 1-888-866-5797. Non-lubricated Tools C EH BG A Description A Air Hose B Filter C Regulator D Lubricator (optional) E Coupler and Plug F - Harbor Freight Tools 69091 | User Manual - Page 9
ITEM 69091 Figure D: Stationary Air Supply Setup Slope Lubricated G Tools C J K H L M F CD E I For technical questions, please call 1-888-866-5797. B B C J LO A A F F IN H Non-lubricated Tools Description A Vibration Pads B Anchor Bolts C Ball Valve D Isolation Hose E - Harbor Freight Tools 69091 | User Manual - Page 10
Safety Setup Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Compressor Area Set Up 1. Designate a work area that is clean and - Harbor Freight Tools 69091 | User Manual - Page 11
Safety Emergency Depressurization If it is necessary to quickly depressurize the Compressor, turn the Power Switch OFF. Then, pull on the ring on the Safety Valve to quickly release stored air pressure. Automatic Shut off System 1. If the Compressor automatically shuts off before reaching its - Harbor Freight Tools 69091 | User Manual - Page 12
Safety Setup Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. BEFORE EACH - Harbor Freight Tools 69091 | User Manual - Page 13
Safety Oil Maintenance Check the oil periodically for clarity. Replace oil if it appears milky or if debris is present, or every 6 months, or 100 hours of runtime, whichever comes first. In harsh environments such as high heat or high humidity, you will need to replace the oil more frequently. - Harbor Freight Tools 69091 | User Manual - Page 14
Safety Setup Troubleshooting Problem Compressor does not start or restart Compressor builds pressure too is too small or cord is too long to properly power compressor. 8. Compressor needs service. 1. No problem. Compressor will start when needed. 2. Check that cord is plugged in securely. 3. - Harbor Freight Tools 69091 | User Manual - Page 15
Safety Troubleshooting (cont.) Problem Overheating Compressor starts and stops excessively Excessive oil too thin or crankcase overfilled with oil. 2. Crankcase vents clogged. Safety valve needs service. Loose fittings. Defective or rusted tank. Likely Solutions 1. Check inlet and outlet filters. - Harbor Freight Tools 69091 | User Manual - Page 16
Safety Parts List and Diagram Parts List Part Description 1 Tank 2 Wheel 3 Handle 4 Bolt M5x105 5 Check Valve 6 Rubber Foot 7 Drain Valve 8 Quick Coupler 9 Pressure Switch 10 Pressure Regulator 11 Connector 12 Tank Pressure Gauge 13 Regulator Pressure Gauge 14 Crankcase 15 - Harbor Freight Tools 69091 | User Manual - Page 17
Assembly Diagram Safety Setup 31 59 37 38 35 44 69 47 62 32 22 21 20 30 36 27 26 61 60 18 19 17 42 16 46 43 41 29 28 25 24 23 8 10 11 13 12 39 9 68 3 14 50 45 51 67 5 66 63 56 57 54 53 55 52 34 48 15 33 49 40 58 ITEM 69091 1 70 2 64 65 6 4 71 7 For technical - Harbor Freight Tools 69091 | User Manual - Page 18
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS - Harbor Freight Tools 69091 | User Manual - Page 19
Record Product's Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. ITEM 69091 For technical questions, please call 1- - Harbor Freight Tools 69091 | User Manual - Page 20
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures.
Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged.
If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2011 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15g