Harbor Freight Tools 93012 User Manual

Harbor Freight Tools 93012 - 16 in. Variable Speed Scroll Saw Manual

Get Harbor Freight Tools 93012 - 16 in. Variable Speed Scroll Saw PDF manuals and user guides View all Harbor Freight Tools 93012 manuals
Add to My Manuals
Save this manual to your list of manuals

Harbor Freight Tools 93012 manual content summary:

  • Harbor Freight Tools 93012 | User Manual - Page 1
  • Harbor Freight Tools 93012 | User Manual - Page 2
    Tool Safety Warnings Read all safety warnings and instructions. Failure to follow the warnings and instructions DANGEROUS ENVIRONMENT. Don't use power tools in damp or wet locations, TOOL. It will do the job better and safer at the rate for which it was designed. 8. USE RIGHT TOOL. Don't force tool
  • Harbor Freight Tools 93012 | User Manual - Page 3
    . Keep proper footing and balance at all times. 14. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. 15. DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits, cutters, and
  • Harbor Freight Tools 93012 | User Manual - Page 4
    on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 9. Avoid unintentional starting. Prepare to begin work before turning on the tool. Page 4 For technical questions, please call 1-888-866-5797. Item 93012 MAINTENANcE
  • Harbor Freight Tools 93012 | User Manual - Page 5
    regular medical check-ups to ensure medical problems are not being caused or worsened from tool do the work. 6. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE INSTRUcTIONS. OpERATION MAINTENANcE Item 93012
  • Harbor Freight Tools 93012 | User Manual - Page 6
    at the beginning of this manual including all text under of the tool off and unplug the tool from its manual. Assembly/Mounting 1. Pick a solid, wood workbench to mount the saw. The workbench must be stable, and able to support bevel Scale Indicator (13) is a guide and should not be relied upon
  • Harbor Freight Tools 93012 | User Manual - Page 7
    Lock Knob (44) Vacuum Hose Connection Blade Tension Knob (21) Saw Table (53) Variable Speed Knob (81) On / Off Switch (72) with Locking Key Item 93012 For technical questions, please call 1-888-866-5797. Page 7
  • Harbor Freight Tools 93012 | User Manual - Page 8
    SETUp Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Turn the power Switch of the tool off and
  • Harbor Freight Tools 93012 | User Manual - Page 9
    the On/Off Switch (72) to the On position. 8. Hold the workpiece with both hands while guiding and pressing down on the workpiece until the cut is complete. 9. Set the On/Off Switch to in Removing and Installing the Blade. Item 93012 For technical questions, please call 1-888-866-5797. Page 9
  • Harbor Freight Tools 93012 | User Manual - Page 10
    Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Turn the power Switch of the tool off and unplug the tool or vibration occurs, have the problem corrected before further use. Do 93012
  • Harbor Freight Tools 93012 | User Manual - Page 11
    a cloth. WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. Figure A Removing and Installing Blades Note: Blade sold woods and other materials up to 1/4". Item 93012 For technical questions, please call 1-888-866-5797. Page 11
  • Harbor Freight Tools 93012 | User Manual - Page 12
    (37). 8. Tighten the Blade Tension Knob (21) by turning clockwise about two full turns. Page 12 For technical questions, please call 1-888-866-5797. Item 93012
  • Harbor Freight Tools 93012 | User Manual - Page 13
    SAFETy SETUp Troubleshooting problem Blades breaking possible causes 1. Wrong Blade Tension 2. Over- Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. OpERATION MAINTENANcE Item 93012 For technical questions, please call 1-888-
  • Harbor Freight Tools 93012 | User Manual - Page 14
    PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY Cover Spring Washer 8 Bolt M8x25 Base Bolt M6x16 Arm Housing Set Support Table Scale Indicator Cross Recessed Pan Head Screw M6x12 Bevel Scale Spring 93012
  • Harbor Freight Tools 93012 | User Manual - Page 15
    Assembly Diagram SAFETy SETUp OpERATION MAINTENANcE Item 93012 For technical questions, please call 1-888-866-5797. Page 15
  • Harbor Freight Tools 93012 | User Manual - Page 16
    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • pO Box 6009 • camarillo, cA 93011 • 1-888-866-5797
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16