HP 0x2x32 HP KVM Server Console Switch Installation Instructions
HP 0x2x32 Manual
View all HP 0x2x32 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 0x2x32 manual content summary:
- HP 0x2x32 | HP KVM Server Console Switch Installation Instructions - Page 1
without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. HP KVM Server Console Switch Installation Instructions October 2003 Part Number 344198-021 - HP 0x2x32 | HP KVM Server Console Switch Installation Instructions - Page 2
is valid. Several rack mounting configurations include: • Side-mount − Type A-Square- and round-hole rails − Type B-Square-hole rails NOTE: The HP KVM Server Console Switch cannot be side-mounted into a rack with round-hole rails. • Standard-mount • Cantilever-mount − Type A-Round-hole rails − Type - HP 0x2x32 | HP KVM Server Console Switch Installation Instructions - Page 3
3. Slide the side-mounting bracket tabs into the U locations on each side of the rack. 3. Install a cage nut behind each rear rail if they have not already been installed. 4. Slide the console switch into the rear of the 1U product. 4. Install four cage nuts into the side-mounting bracket U - HP 0x2x32 | HP KVM Server Console Switch Installation Instructions - Page 4
have an FCC ID or logo on the label. Once the class of the device is determined, refer to the corresponding statement in the user guide on the Documentation CD.
HP KVM Server
Console Switch
Installation Instructions
Read Instructions Completely Before Beginning
Installation Procedures
© 2003 Hewlett-Packard Development Company, L.P.
(c) 2003 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or editorial errors
or omissions contained herein. The information in this document is provided
“as is” without warranty of any kind and is subject to change without notice.
The warranties for HP products are set forth in the express limited warranty
statements accompanying such products. Nothing herein should be
construed as constituting an additional warranty.
HP KVM Server Console Switch
Installation Instructions
October 2003
Part Number 344198-021
344198- 021
Overview
The HP KVM Server Console Switch ships with rack mounting
brackets for easy integration into your rack. Before installing
the HP KVM Server Console Switch and other components in
the rack cabinet (if not already installed), stabilize the rack in a
permanent location. Begin installing your equipment at the
bottom of the rack cabinet, then work to the top. Avoid uneven
loading or overloading of the rack cabinets.
Installation Checklist
Before installation, refer to the following lists to be sure that all
of the listed components were received.
Kit Contents
•
KVM Server Console Switch
•
Power cords
•
Rack mounting kit
•
Serial download cable
•
Documentation kit
•
Firmware CD kit
This kit might contain extra hardware for your convenience.
Required Items Not Included
•
PS/2 Interface Adapter or USB Interface Adapter
•
UTP CAT5 cable (CAT6 and CAT7 may be also used)
Optional Items
Expansion Module
Required Tools
•
Phillips screwdriver
•
T-25 Torx driver