HP 203039-B21 Console Management Controller Door Lock Kit Installation Card
HP 203039-B21 - Console Management Controller Manual
 |
UPC - 720591484798
View all HP 203039-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 203039-B21 manual content summary:
- HP 203039-B21 | Console Management Controller Door Lock Kit Installation Card - Page 1
part number is 203039-B23. Read Before Installing Product Read the Important Safety Information guide (included with service of this product must be performed by individuals who are knowledgeable about the procedures, precautions, and hazards associated with AC power products. Follow the instructions - HP 203039-B21 | Console Management Controller Door Lock Kit Installation Card - Page 2
2 Connecting the Actuator Cable to the Lock Mechanism The actuator cables are attached to the door lock control unit. Use the short cable to connect to the front lock mechanism and the longer cable to connect to the rear lock mechanism. To connect to the front lock mechanism, feed the actuator - HP 203039-B21 | Console Management Controller Door Lock Kit Installation Card - Page 3
4 Installing the Front Door Lock Mechanism Connect the front door lock assembly to the side of the front frame. 91XX Series Rack with Extension Kit Align the extension brackets (257664-002) on the rear door lock mechanism and secure with the screws. Position the rear door lock assembly as shown, so - HP 203039-B21 | Console Management Controller Door Lock Kit Installation Card - Page 4
in this assembly 3. 1 2 3 9 Connecting the Concealed Door Release Cable The concealed door release button 2 is designed to release the door locks manually if this feature is activated in the Compaq Intelligent Rack Manager Lite software. Connect the concealed door release cable assembly 1 to the - HP 203039-B21 | Console Management Controller Door Lock Kit Installation Card - Page 5
Rack Manager Lite software (see the Compaq Console Management Controller User Guide). One CMC is able to support up to two door lock kits. DOORS AND SENSORS: For is selected as No. If the Compaq Intelligent Rack Manager Lite service is not running on the management console, the CMC detects a - HP 203039-B21 | Console Management Controller Door Lock Kit Installation Card - Page 6
fuse cover 1. Replace the fuse 2 with the exact rating as specified on the unit label. The second fuse 3 is a spare. Contact your Compaq authorized service representative for more details. 1 3 2 Repairs to the CMC door lock control unit and lock mechanism must be carried out by Compaq or a Compaq
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
Installation Card For
Door Lock Kit
Read Instructions Completely Before
Beginning Installation Procedures
Printed on recycled paper
NOTICE
© 2001 Compaq Information Technologies Group, L.P.
Compaq and the Compaq logo are trademarks of Compaq Information Technologies
Group, L.P.
Compaq shall not be liable for technical or editorial errors or omissions contained herein.
The information in this document is provided as is without warranty of any kind and is
subject to change without notice. The warranties for Compaq products are set forth in the
express limited warranty statements accompanying such products. Nothing herein should
be construed as constituting an additional warranty.
Compaq Console Management Controller Door Lock Kit Installation Instructions
Second Edition (December 2001)
Part Number 240828-022
About This Device
This document provides instructions to assist qualified personnel
with the installation of the Compaq Console Management
Controller (CMC) Door Lock Kit.
This door lock kit includes the following features:
■
Installs in the 9000 and 10000 series of Compaq racks.
■
Mounts in a 0U configuration.
■
Provides front and rear door locking control for a single rack.
Regulatory Compliance Information
This CMC Door Lock Kit is listed and certified for use only with
the Compaq Console Management Controller Units. This device
is not intended for use with nor suitable for connection to facility
burglary protection, security, or surveillance systems.
Regulatory certification for this product was obtained under
agency series number EO3009L. The corresponding part number
is 203039-B23.
Read Before Installing Product
Read the
Important Safety Information
guide (included with this
kit) before installing this product.
WARNING
:
There is a risk of personal injury from electrical shock and
hazardous energy levels. The installation of options and routine maintenance
and service of this product must be performed by individuals who are
knowledgeable about the procedures, precautions, and hazards associated
with AC power products.
Follow the instructions in this document during installation of the
door lock kit.
Kit Contents
■
Door lock control unit
-
Mounting brackets (257661-001)
■
Country-specific power cord
■
Front rack door
-
Lock assembly
-
91XX, 9842, and 106XX (257662-001)
-
Latch assembly
-
91XX and 106XX (257662-002)
-
9842 (257662-003)
■
Rear rack door
-
Lock assembly
-
91XX, 9842, and 106XX (257663-001)
-
Latch assembly
-
91XX and 9842 (257663-002)
-
106XX (257663-003)
-
Brackets
-
Standard rack (257664-001)
-
Standard rack with extension kit (257664-002)
■
Tie wraps
■
Cables
-
Concealed Door Release cable assembly (257658-001)
-
CMC lock command cable (231915-001)
-
I
2
C communication cable (231526-002)
■
Software
-
Compaq Intelligent Rack Manager Lite CD
-
Power Products Documentation CD
■
Mounting hardware
-
Screws
-
Cage nuts
C
ONSOLE
M
ANAGEMENT
C
ONTROLLER
240828- 022