HP 22.1kVA HP 60-A Power Distribution Unit Installation Instructions
HP 22.1kVA Manual
View all HP 22.1kVA manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 22.1kVA manual content summary:
- HP 22.1kVA | HP 60-A Power Distribution Unit Installation Instructions - Page 1
Power Distribution Unit Installation Instructions About this device HP website (http://www.hp.com/support/importantsafetyinformation). © Copyright 2006 Hewlett-Packard products and services are set forth in the express warranty statements accompanying such products and services. Nothing - HP 22.1kVA | HP 60-A Power Distribution Unit Installation Instructions - Page 2
PDU warnings Before connecting this product, read the following PDU warnings. WARNING: To reduce the risk of personal injury or damage to the equipment: • Be sure the output voltage of each PDU receptacle is the same as the line voltage of the main AC circuit feeding the PDU. • Be sure that the load - HP 22.1kVA | HP 60-A Power Distribution Unit Installation Instructions - Page 3
Installing the 60-A PDU in round-hole racks 1. Determine the location within the rack for the PDU. 2. Install two M5 barrel nuts (1) where the top screw holes on the PDU mounting brackets are to be located. 3. Align the top screw holes on the PDU mounting brackets with the M5 barrel nuts, and then - HP 22.1kVA | HP 60-A Power Distribution Unit Installation Instructions - Page 4
Installing the 60-A PDU in square-hole racks 1. Determine the location within the rack for the PDU. 2. Install four cage nuts where all four screw holes on the PDU brackets are to be located. 3. Align all four screw holes on the PDU brackets with the cage nuts, and insert and tighten four M5 x 16-mm
HP 60-A Power
Distribution Unit
Installation Instructions
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
March 2006 (First Edition)
Part Number 418553-001
About this device
The HP 60-A Power Distribution Unit (PDU) provides flexibility
for your power requirements.
Kit contents
The following items are required for installation:
•
60-A PDU (1)
•
M5 x 16-mm screws (4)
•
Hex nuts with captive M5 star washers (2)
•
M5 barrel nuts (2)
•
M5 cage nuts (4)
This kit might contain extra hardware for your convenience.
Required tools
The following tools are required for installation:
•
T-25 Torx driver
•
Cage nut insertion tool (included with your original rack
hardware kit)
Important safety information
Before installation, read the
Important Safety Information
on
the HP website
).