HP 2230s Drives - Windows XP

HP 2230s - Compaq Business Notebook Manual

HP 2230s manual content summary:

  • HP 2230s | Drives - Windows XP - Page 1
    Drives User Guide
  • HP 2230s | Drives - Windows XP - Page 2
    such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: July 2008 Document Part Number: 490898-001 Product notice This user guide describes features
  • HP 2230s | Drives - Windows XP - Page 3
    performance Using Disk Defragmenter ...3 Using Disk Cleanup ...3 4 Using HP 3D DriveGuard Identifying HP 3D DriveGuard status 5 Using HP 3D DriveGuard software ...6 5 Replacing a hard drive 6 Using an optical drive Identifying the installed optical drive 10 Using optical discs (CDs and DVDs 10
  • HP 2230s | Drives - Windows XP - Page 4
    Obtaining Microsoft device drivers 21 Obtaining HP device drivers 21 A disc does not play automatically ...22 The process of burning a disc does not begin, or it stops before completion 23 A DVD playing in Windows Media Player produces no sound or display 24 Index ...25 iv
  • HP 2230s | Drives - Windows XP - Page 5
    1 Identifying installed drives To view the drives installed on the computer, select Start > My Computer. 1
  • HP 2230s | Drives - Windows XP - Page 6
    force when inserting a drive into a drive bay. Do not type on the keyboard or move the computer while the optical drive is writing to a disc. The write process is sensitive to vibration. When the battery is the only source of power, be sure that the battery is sufficiently charged before writing to
  • HP 2230s | Drives - Windows XP - Page 7
    to your computer. HP recommends defragmenting your hard drive at least once a month. You may set Disk Defragmenter to run on a monthly schedule, but you can defragment your computer manually at any time. To run Disk Defragmenter: 1. Select Start > All Programs > Accessories > System Tools > Disk
  • HP 2230s | Drives - Windows XP - Page 8
    the computer is running on battery power. A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal operation. NOTE: If the upgrade bay contains a hard drive, the hard drive is protected by HP 3D DriveGuard. Hard drives installed in optional docking devices
  • HP 2230s | Drives - Windows XP - Page 9
    the hard drive icon. If HP 3D DriveGuard has parked the drive, the computer will behave in the following ways: ● The computer will not shut down. ● The computer will not initiate Standby or Hibernation, except as described in the following Note. NOTE: If the computer is running on battery power and
  • HP 2230s | Drives - Windows XP - Page 10
    , you may not be able to enable or disable HP 3D DriveGuard. Additionally, members of an Administrator group can change the privileges for nonAdministrator users. ● Determine whether a drive in the system is supported. To open the software and change settings, follow these steps: 1. Double-click the
  • HP 2230s | Drives - Windows XP - Page 11
    the display. 3. Disconnect all external hardware devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the hard drive bay toward you. 6. Remove the battery from the computer. 7. Loosen the 2 hard drive cover screws
  • HP 2230s | Drives - Windows XP - Page 12
    from the computer (2). 9. Loosen the hard drive screw (1). 10. Pull the hard drive tab to the left (2) to disconnect the hard drive. 11. Lift the hard drive (3) out of the hard drive bay. To install a hard drive: 1. Insert the hard drive into the hard drive bay (1). 2. Pull the hard drive tab (2) to
  • HP 2230s | Drives - Windows XP - Page 13
    3. Tighten the hard drive screw (3). 4. Align the tabs (1) on the hard drive cover with the notches on the computer. 5. Replace the cover (2). 6. Tighten the hard drive cover screws (3). 9
  • HP 2230s | Drives - Windows XP - Page 14
    write to optical discs, as described in the following table. NOTE: Some of the optical drives listed may not be supported by your computer. The listed drives are not necessarily all of the supported optical drives. Optical drive type Read CD and DVD-ROM media Write to CD-R/ RW media Write to DVD
  • HP 2230s | Drives - Windows XP - Page 15
    Playing a CD or DVD 1. Turn on the computer. 2. Press the release button (1) on the drive bezel to release the disc tray. 3. Pull out the tray (2). 4. Hold the disc by the edges to avoid touching the flat surfaces and position the
  • HP 2230s | Drives - Windows XP - Page 16
    network drive to a destination disc. Do not use the computer keyboard or move the computer while the computer is writing to a disc. The write process is sensitive to vibration. NOTE: For details about using software included with the computer, refer to the software manufacturer's instructions, which
  • HP 2230s | Drives - Windows XP - Page 17
    files can be played only on MP3 players or on computers with MP3 software installed. To burn a CD or DVD, follow these steps: 1. Download or copy the source files into a folder on your hard drive. 2. Insert a blank CD or DVD into the optical drive. 3. Select Start > All Programs and the name of the
  • HP 2230s | Drives - Windows XP - Page 18
    release button (1) on the drive bezel to release the disc tray, and then gently pull out the tray (2) until it stops. 2. Remove the disc (3) from the end of a paper clip (1) into the release access in the front bezel of the drive. 2. Press in gently on the paper clip until the tray is released, and
  • HP 2230s | Drives - Windows XP - Page 19
    the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. 4. Close the disc tray and place the disc in a protective case
  • HP 2230s | Drives - Windows XP - Page 20
    to continue. If this message is displayed, click No. After you click No, the computer may behave in either of the following ways: ◦ Playback may resume. - or - ◦ The playback window in the multimedia program may close. Settings. ◦ Set Colors to Medium (16 bit). 16 Chapter 6 Using an optical drive
  • HP 2230s | Drives - Windows XP - Page 21
    time becomes the permanent region setting on the DVD drive. The number of region changes remaining is displayed on the DVD Region tab. To change settings through the operating system: 1. Select Start > My Computer. 2. Right-click in the window, and select Properties > Hardware tab > Device Manager
  • HP 2230s | Drives - Windows XP - Page 22
    drive module (a hard drive with an adapter attached) ● DVD-ROM Drive ● DVD/CD-RW Combo Drive ● DVD+RW and CD-RW Combo Drive ● DVD±RW and CD-RW Combo Drive NOTE: For more information about required software and drivers, or to learn which computer port to use, refer to the manufacturer's instructions
  • HP 2230s | Drives - Windows XP - Page 23
    8 Troubleshooting 19
  • HP 2230s | Drives - Windows XP - Page 24
    the optical drive If the computer does not detect the optical drive, use Device Manager to troubleshoot the device and then update, uninstall, or disable the device driver: 1. Remove any discs from the optical drive. 2. Select Start > My Computer. 3. Right-click in the window and select Properties
  • HP 2230s | Drives - Windows XP - Page 25
    for software and driver downloads, and then type your computer model number in the product box. 4. Press enter, and then follow the on-screen instructions. Follow either of the following procedures to obtain HP device drivers. To use HP Update: 1. Select Start > All Programs > HP > HP Update. 2. On
  • HP 2230s | Drives - Windows XP - Page 26
    1. Select Start > My Computer. 2. Right-click the device (such as CD-ROM drive), and then click Properties. 3. Click the AutoPlay tab, and then select one of the available actions. 4. Click OK. NOTE: For more information about AutoPlay, refer to Help and Support. 22 Chapter 8 Troubleshooting
  • HP 2230s | Drives - Windows XP - Page 27
    copying a disc, save the information on the source disc to your hard drive before trying to burn the contents to a new disc, and then burn from your hard drive. ● Reinstall the disc-burning device driver located in the DVD/CD-ROM drives category in Device Manager. The process of burning a disc does
  • HP 2230s | Drives - Windows XP - Page 28
    A DVD playing in Windows Media Player produces no sound or display You must use WinDVD, which is preinstalled on the computer, to play a DVD. 24 Chapter 8 Troubleshooting
  • HP 2230s | Drives - Windows XP - Page 29
    8 replacing 7 hard drive external 18 HP 3D DriveGuard 4 installing 8 replacing 7 HP 3D DriveGuard 4 I issues, resolving 19 L light, drive 5 M maintenance Disk Cleanup 3 Disk Defragmenter 3 O optical disc removing 14 optical drive 10, 18 optical drive detection 20 R region codes, DVD 17 S software
  • HP 2230s | Drives - Windows XP - Page 30
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Drives
User Guide