HP 3020 Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2
HP 3020 - Cisco Catalyst Blade Switch Manual
UPC - 882658086625
View all HP 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 3020 manual content summary:
- HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 1
Cisco Catalyst Blade Switch 3020 for HP Command Reference Cisco IOS Release 12.2(25)SEF June 2006 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Text Part Number: OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 2
SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL SOFTWARE as part of UCB and iQuick Study are service marks of Cisco Blade Switch 3020 for HP Command Reference © 2006 Cisco Systems - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 3
Problems in Cisco Products xviii Obtaining Technical Assistance xix Cisco Technical Support & Documentation Website xix Submitting a Service Request xx Definitions of Service Mode 1-5 Line Configuration Mode 1-5 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands 2-1 aaa accounting dot1x 2-1 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 4
48 define interface-range 2-49 delete 2-51 deny (MAC access-list configuration) 2-52 dot1x 2-55 dot1x auth-fail max-attempts 2-57 dot1x auth-fail vlan 2-59 dot1x control-direction 2-61 dot1x critical (global configuration) 2-63 Cisco Catalyst Blade Switch 3020 for HP Command Reference iv OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 5
) 2-65 dot1x default 2-67 dot1x guest-vlan 2-68 dot1x host-mode 2-70 dot1x initialize 2-71 dot1x mac-auth-bypass 2-72 dot1x max-reauth-req 2-74 dot1x max-req 2-75 dot1x pae 2-76 dot1x port- ip igmp max-groups 2-116 ip igmp profile 2-118 Cisco Catalyst Blade Switch 3020 for HP Command Reference v - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 6
mac access-group 2-149 mac access-list extended 2-151 mac address-table aging-time 2-153 mac address-table move update 2-154 mac address-table notification 2-156 mac address-table static 2-158 mac policer 2-181 mls qos cos 2-183 Cisco Catalyst Blade Switch 3020 for HP Command Reference vi OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 7
2-223 pagp learn-method 2-226 pagp port-priority 2-228 permit (MAC access-list configuration) 2-230 police 2-233 police aggregate 2-235 policy stats 2-253 service password-recovery 2-254 service-policy 2-256 set 2-259 setup 2-261 Cisco Catalyst Blade Switch 3020 for HP Command Reference vii - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 8
groups 2-330 show ip igmp snooping mrouter 2-332 show ip igmp snooping querier 2-334 show lacp 2-336 show link state group 2-340 show mac access-group 2-342 show mac address-table 2-344 show mac address-table address 2-346 Cisco Catalyst Blade Switch 3020 for HP Command Reference viii OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 9
mac address-table count 2-349 show mac address-table dynamic 2-351 show mac address-table interface 2-353 show mac address-table move update 2-355 show mac address-table notification 2-357 show mac address-table static 2-359 show mac 2-423 Cisco Catalyst Blade Switch 3020 for HP Command Reference ix - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 10
2-424 snmp-server enable traps 2-425 snmp-server host 2-428 snmp trap mac-notification 2-432 spanning-tree backbonefast 2-434 spanning-tree bpdufilter 2-435 spanning-tree 484 srr-queue bandwidth share 2-486 storm-control 2-488 Cisco Catalyst Blade Switch 3020 for HP Command Reference x OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 11
2-515 system mtu 2-517 test cable-diagnostics tdr 2-519 traceroute mac 2-520 traceroute mac ip 2-523 trust 2-525 udld 2-527 udld port 2-529 udld ) 2-559 Cisco Catalyst Switch 3020 for HP Boot Loader Commands A-1 boot A-2 cat A-4 copy A-5 Cisco Catalyst Blade Switch 3020 for HP Command Reference xi - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 12
B-10 debug interface B-12 debug ip igmp filter B-14 debug ip igmp max-groups B-15 debug ip igmp snooping B-16 debug lacp B-17 debug mac-notification B-18 debug matm B-19 debug matm move update B-20 debug monitor B-21 debug mvrdbg B-22 debug nvram B-23 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 13
B-60 debug spanning-tree backbonefast B-62 debug spanning-tree bpdu B-63 debug spanning-tree bpdu-opt B-64 debug spanning-tree mstp B-65 debug spanning-tree switch B-67 Cisco Catalyst Blade Switch 3020 for HP Command Reference xiii - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 14
Blade Switch 3020 for HP Show Platform Commands C-1 show platform acl C-2 show platform backup interface C-3 show platform configuration C-4 show platform etherchannel C-5 show platform forward C-6 show platform ip igmp snooping C-8 show platform layer4op C-10 show platform mac - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 15
interface (CLI) to manage the Cisco Catalyst Blade Switch 3020 for HP, hereafter referred to as the switch. Before using this guide, you should have experience working with the Cisco IOS commands and the switch software features. Before using this guide, you should have experience working with the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 16
not contained in this manual. Caution Means reader be Blade Switch 3020 for HP (not orderable but available on Cisco.com) • Cisco Catalyst Blade Switch 3020 for HP System Message Guide (not orderable but available on Cisco.com) • Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 17
Catalyst Blade Switch 3020 for HP , and command guides for Cisco hardware and software products. With the DVD, you have access to the same HTML documentation that is found on the Cisco website without being connected to the Internet. Certain products also have .PDF - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 18
is found at this URL: http://www.cisco.com/en/US/products/products_psirt_rss_feed.html Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We : • 1 877 228-7302 • 1 408 525-6532 xviii Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 19
service contract, contact your reseller. Cisco Technical Support & Documentation Website The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting placing a service call. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference xix - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 20
specifications for many Cisco products that are sold through channel partners. It is updated twice a year and includes the latest Cisco offerings. To order and find out more about the Cisco Product Quick Reference Guide, go to this URL: http://www.cisco.com/go/guide Cisco Catalyst Blade Switch 3020 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 21
of Cisco books, reference guides, documentation, and logo merchandise network deployment and troubleshooting tips, configuration support services, can be obtained at this URL: http://www.cisco.com/en/US US/learning/index.html OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference xxi - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 22
Obtaining Additional Publications and Information Preface Cisco Catalyst Blade Switch 3020 for HP Command Reference xxii OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 23
. This chapter describes how to use the switch command-line interface (CLI) to configure software features. • For a complete description of the commands that support these features, see Chapter 2, "Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands." • For information on the boot loader - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 24
configuration From privileged EXEC mode, enter the vlan database command. Switch(vlan)# From global configuration mode, Switch(config-line)# specify a line by entering the line command. the end command, or press Ctrl-Z. Cisco Catalyst Blade Switch 3020 for HP Command Reference 1-2 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 25
Switch# Enter the enable command to access privileged EXEC mode: Switch> enable Switch# The supported commands can vary depending on the version of software in Switch# configure terminal Enter configuration commands, one per line. End with CNTL/Z. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 26
The new prompt means interface configuration mode. Switch(config-if)# The supported commands can vary depending on the version of software in use. To display a comprehensive list of take effect when you exit config-vlan mode. Cisco Catalyst Blade Switch 3020 for HP Command Reference 1-4 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 27
prompt. Switch(config-line)# ? To exit line configuration mode and to return to global configuration mode, use the exit command. To exit line configuration mode and to return to privileged EXEC mode, enter the end command, or press Ctrl-Z. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 28
CLI Command Modes Chapter 1 Using the Command-Line Interface Cisco Catalyst Blade Switch 3020 for HP Command Reference 1-6 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 29
Blade Switch 3020 for HP Cisco IOS Commands aaa accounting dot1x Use the aaa accounting dot1x global configuration command to enable authentication, authorization, and accounting (AAA) accounting and to create method lists defining specific default list for accounting services. Send a start - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 30
aaa accounting dot1x Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands radius tacacs+ (Optional) Enable RADIUS authorization. (Optional) Enable TACACS+ accounting. Defaults AAA accounting is disabled. Command Modes Global configuration Command History Release - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 31
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands aaa authentication dot1x aaa authentication dot1x -line help strings, only the default and group radius keywords are supported. Defaults No authentication is performed. Command Modes Global configuration Command History - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 32
aaa authentication dot1x Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command aaa new-model show Release 12.2 > File Management Commands > Configuration File Management Commands. Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-4 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 33
Blade Switch 3020 for HP Cisco IOS Commands aaa authorization network aaa authorization network Use the aaa authorization network global configuration command to the configure the switch to use user-RADIUS authorization for all network-related service to allow the switch to download IEEE 802.1x - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 34
match ip address al2 Switch(config-access-map)# action forward Switch(config-access-map)# exit Switch(config)# vlan filter vmap4 vlan-list 5-6 You can verify your settings by entering the show vlan access-map privileged EXEC command. Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-6 OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 35
3:Addressing and Services, Release 12.2 > IP Services Commands. Creates a named MAC address access list. Defines the match conditions for a VLAN map. Displays the VLAN access maps created on the switch. Creates a VLAN access map. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 36
software image after it is successfully downloaded. Overwrite the software image in flash memory with the downloaded one. Reload the system after successfully downloading is the software image to download and install on the switch. Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-8 OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 37
switch: Switch# archive download-sw /imageonly tftp://172.20.129.10/test-image.tar This example shows how to keep the old software version after a successful download: Switch# archive download-sw /leave-old-sw tftp://172.20.129.10/test-image.tar OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 38
archive download-sw Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command archive tar archive upload-sw delete Description Creates a tar file, lists the files in a tar file, or extracts the files from a tar file. Uploads an existing image on the switch to - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 39
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands archive tar archive tar Use the archive tar the local or network file system and the name of the tar file to create. These options are supported: • The syntax for the local flash filesystem: flash: • The syntax for the FTP: ftp - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 40
Blade Switch 3020 for HP Cisco IOS Commands Defaults /table source-url /xtract source-url flash:/file-url [dir/file...] Display the contents of an existing tar file to the screen. For source-url, specify the source URL alias for the local or network file system. These options are supported - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 41
172.20.10.30/saved.tar flash:/ new-configs Related Commands Command archive download-sw archive upload-sw Description Downloads a new image from a TFTP server to the switch. Uploads an existing image on the switch to a server. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 42
specific version string of the image to be uploaded. The destination URL alias for a local or network file system. These options are supported are uploaded, the software creates the tar file. Image names are case sensitive. 2-14 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 43
.20.140.2/test-image.tar Related Commands Command archive download-sw archive tar Description Downloads a new image to the switch. Creates a tar file, lists the files in a tar file, or extracts the files from a tar file. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-15 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 44
auto qos voip Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands auto qos voip Use the auto qos voip interface configuration command to automatically configure quality of service (QoS) for voice over IP (VoIP) within a QoS domain. Use the no form of this command to return to the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 45
round robin. Ingress queues support shared mode only. Queue 10/100 Ethernet Ports 10 percent 10 switch without saving the current configuration to memory. If the generated commands fail to be applied, the previous running configuration is restored. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 46
Cisco SoftPhone is connected to a switch or routed port, the switch supports only one Cisco SoftPhone application per port. switched in pass-through mode (packets are switched without any rewrites and classified as best effort without any policing). 2-18 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 47
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands auto qos voip Examples This example shows how to enable auto-QoS and to trust the QoS labels received in incoming packets when the switch or router connected to the port is a trusted device: Switch(config)# interface - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 48
boot boothlpr Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands boot boothlpr Use the boot boothlpr environment variable. For more information, see Appendix A, "Cisco Catalyst Switch 3020 for HP Boot Loader Commands." Related Commands Command show boot Description Displays the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 49
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands boot config-file boot config- CONFIG_FILE environment variable. For more information, see Appendix A, "Cisco Catalyst Switch 3020 for HP Boot Loader Commands." Related Commands Command show boot Description Displays the settings - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 50
boot enable-break Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands boot enable-break Use the environment variable. For more information, see Appendix A, "Cisco Catalyst Switch 3020 for HP Boot Loader Commands." Related Commands Command show boot Description Displays the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 51
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands boot helper boot helper Use the HELPER environment variable. For more information, see Appendix A, "Cisco Catalyst Switch 3020 for HP Boot Loader Commands." Related Commands Command show boot Description Displays the settings - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 52
boot helper-config-file Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands boot helper-config-file environment variable. For more information, see Appendix A, "Cisco Catalyst Switch 3020 for HP Boot Loader Commands." Related Commands Command show boot Description Displays the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 53
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands boot manual boot manual Use the boot manual global configuration command to enable manually booting the switch during the next boot cycle. Use the no form of this command to return to the default setting. boot manual no boot manual Syntax - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 54
to specify the name of the private configuration file to be pconfig: Switch(config)# boot private-config-file pconfig Related Commands Command show boot Description Displays the settings of the boot environment variables. 2-26 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 55
. The boot system command is automatically manipulated to load the downloaded image. This command changes the setting of the BOOT environment variable. For more information, see Appendix A, "Cisco Catalyst Switch 3020 for HP Boot Loader Commands." Related Commands Command show boot Description - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 56
channel-group Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands channel-group Use the channel-group interface configuration command to channel is formed only with another port group in active mode. 2-28 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 57
Caution You should use care when using the on mode. This is a manual configuration, and ports on both ends of the EtherChannel must have the same secure port as part of an EtherChannel or an EtherChannel port as a secure port. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 58
channel-group Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands For a complete list of configuration guidelines, see the "Configuring EtherChannels" chapter in the software configuration guide for this release. Examples This example shows how to configure an EtherChannel. It - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 59
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands channel-protocol channel-protocol Use the channel-protocol interface configuration EtherChannel group. Displays protocol information the EtherChannel. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-31 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 60
in that policy map. You attach the policy map to a port by using the service-policy interface configuration command. After entering the class command, you enter policy-map class configuration map is shared among many ports. 2-32 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 61
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands class Examples This example shows how to create a policy map called policy1. When attached to the ingress direction, it matches all the incoming traffic defined in class1, sets the IP Differentiated Services Code Point (DSCP) to 10, and - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 62
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS ) Perform a logical-OR of the matching statements under this class map. One or more criteria must be matched. Name of the class map. Defaults part of a globally named service policy applied on a per-port basis. After you are in quality of service - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 63
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands class-map To define packet classification on a physical-port basis, only one match command per class map is supported. In this situation, the match-all and match-any keywords are equivalent. Only one access control list (ACL) can - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 64
entering the show dot1x privileged EXEC command. Related Commands Command show dot1x Description Displays IEEE 802.1x statistics, administrative status, and operational status for the switch or for the specified port. 2-36 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 65
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands clear eap sessions clear eap sessions Use the clear eap sessions privileged EXEC command to clear Extensible Authentication Protocol (EAP) session information for the switch or for the specified port. clear eap sessions [ - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 66
clear lacp Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands clear lacp Use the clear lacp privileged EXEC command to Commands Command show lacp Description Displays LACP channel-group information. 2-38 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 67
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands clear mac address-table clear mac address-table Use the clear mac address-table privileged EXEC command to delete from the MAC address table a specific dynamic address, all dynamic addresses on a particular interface, or all - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 68
and dynamic entries. Displays the MAC address notification settings for all interfaces or the specified interface. Enables the Simple Network Management Protocol (SNMP) MAC address notification trap on a specific interface. 2-40 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 69
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands clear mac address-table move update clear mac address-table move update Use the clear mac address-table move update privileged EXEC command to clear the mac address-table-move update-related counters. clear mac address-table move - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 70
for group 10: Switch# clear pagp 10 counters You can verify that information was deleted by entering the show pagp privileged EXEC command. Related Commands Command show pagp Description Displays PAgP channel-group information. 2-42 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 71
addresses from the MAC address table: Switch# clear port-security all This example shows how to remove a specific configured secure address from the MAC address table: Switch# clear port-security configured address 0008.0070.0007 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 72
Blade Switch 3020 for HP Cisco IOS Commands This example shows how to remove all the dynamic secure addresses learned on a specific interface: Switch# security mac-address mac-address Configures secure MAC addresses. switchport port-security maximum Configures a maximum number of secure MAC - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 73
Examples This example shows how to clear spanning-tree counters for all interfaces: Switch# clear spanning-tree counters Related Commands Command show spanning-tree Description Displays spanning-tree state information. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-45 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 74
-tree detected-protocols Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands clear spanning-tree detected- (MSTP) supports a built-in protocol migration mechanism that enables it to interoperate with legacy IEEE 802.1D switches. If a rapid-PVST+ switch or an MSTP switch receives a - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 75
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands clear vmps statistics clear vmps statistics Use the clear vmps statistics privileged retry count, VMPS IP addresses, and the current and primary servers. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-47 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 76
clear vtp counters Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands clear vtp counters Use the clear vtp counters privileged EXEC information about the VTP management domain, status, and counters. 2-48 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 77
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands define interface-range define interface-range Use the define is always 0. • the range is type 0/number - number (for example, gigabitethernet 0/1 - 2). OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-49 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 78
define interface-range Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands When you define a range, you must enter a space before the .2 > File Management Commands > Configuration File Management Commands. 2-50 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 79
the directory that contains the old software image after a successful download of a new image: Switch# delete /force /recursive flash:/old download-sw Description Downloads a new image to the switch and overwrites or keeps the existing image. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 80
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands deny (MAC access-list configuration) Use the deny MAC access-list configuration address. (Optional) Select EtherType DEC-Amber. (Optional) Select a class of service (CoS) number from 0 to 7 to set priority. Filtering on CoS can - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 81
Network Service (VINES help strings, appletalk is not supported as a matching condition. To MAC-named ACL is to deny. Command Modes MAC-access list configuration Command History Release 12.2(25)SEF Modification This command was introduced. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 82
access-list configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Usage Guidelines You enter MAC-access list configuration mode by using the mac access-list extended global configuration command. If you use the host keyword, you cannot enter an address mask; if you - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 83
Catalyst Blade Switch 3020 for HP Cisco IOS strings, the credentials name keywords are not supported. Syntax Description critical {eapol | recovery delay Server (ACS) application for IEEE 802.1x authentication with EAP-Transparent LAN Services (TLS) and with EAP-MD5, make sure that the device is - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 84
authentication bypass feature on the switch. Enables and specifies an active VLAN as an IEEE 802.1x guest VLAN. Enables manual control of the authorization state of the port. Displays IEEE 802.1x status for the specified port. 2-56 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 85
gigabitethernet0/23 Switch(config-if)# dot1x auth-fail max-attempts 2 Switch(config-if)# end Switch(config)# end Switch# You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 86
dot1x auth-fail max-attempts Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command dot1x auth-fail vlan [vlan id] dot1x max-reauth-req [count] show dot1x [interface interface-id] Description Enables the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 87
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x auth-fail vlan dot1x auth-fail the default) by sending an EAP-start message. • Some hosts (for example, devices running Windows XP) cannot implement DHCP until they receive an EAP success message. A supplicant might cache an - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 88
Blade Switch 3020 for HP VLAN is supported only in MAC address that appears on the port is treated as a security violation. Examples This example shows how to configure a restricted VLAN on port 21: Switch# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Switch - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 89
chapter in the software configuration guide. Examples This example shows how to enable unidirectional control: Switch(config-if)# Supplicant MAC 0002.b39a.9275 AuthSM State = CONNECTING BendSM State = IDLE PortStatus = UNAUTHORIZED OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 90
dot1x control-direction Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands If you enter the If you enter the dot1x control-direction in interface configuration command and the port cannot support this mode due to a configuration conflict, this appears in the show dot1x all command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 91
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x critical (global configuration) dot1x critical (global configuration) Use the dot1x critical global configuration command on a standalone switch to configure the parameters for the inaccessible authentication bypass feature - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 92
dot1x critical (global configuration) Related Commands Command dot1x critical (interface configuration) show dot1x Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Description Enables the inaccessible authentication bypass feature, and configures the access VLAN for the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 93
is not authenticated. If the Windows XP client is configured for DHCP and has an IP address from the DHCP server, receiving an EAP-Success message on a critical port might not re-initiate the DHCP configuration process. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-65 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 94
dot1x critical (interface configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands You can configure the inaccessible authentication bypass feature and the restricted VLAN on an IEEE 802.1x port. If the switch tries to re-authenticate a critical port in a restricted VLAN - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 95
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x default dot1x default Use the dot1x default interface configuration command to interface-id] Displays IEEE 802.1x status for the specified port. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-67 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 96
, the port is put into the unauthorized state in the RADIUS-configured or user-configured access VLAN, and authentication is restarted. Guest VLANs are supported on IEEE 802.1x ports in single-host or multiple-hosts mode. 2-68 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 97
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x guest-vlan You can configure any active VLAN except an Remote Switched Port Analyzer (RSPAN) VLAN or a voice VLAN as an IEEE 802.1x guest VLAN. The guest VLAN feature is not supported on trunk ports; it is supported only on access - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 98
dot1x host-mode Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x host-mode Use the to attach multiple clients to an IEEE 802.1x-enabled port. In multiple-hosts mode, only one of the attached hosts needs to be successfully authorized for all hosts to be granted network - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 99
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x initialize dot1x initialize Use the dot1x initialize privileged EXEC command to manually return the specified IEEE 802.1x-enabled port to an unauthorized state before initiating a new authentication session on the port. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 100
1x Authentication with MAC Authentication Bypass" section and the "IEEE 802.1x Authentication Configuration Guidelines" section in the "Configuring IEEE 802.1x Port-Based Authentication" chapter of the software configuration guide. 2-72 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 101
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x mac-auth-bypass Examples This example shows how to enable MAC authentication bypass and to configure the switch to use EAP for authentication: Switch(config-if)# dot1x mac-auth-bypass eap You can verify your settings by - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 102
Blade Switch 3020 for HP Cisco IOS Commands dot1x max-reauth-req Use the dot1x max-reauth-req interface configuration command to set the maximum number of times that the switch circumstances such as unreliable links or specific behavioral problems with certain clients and authentication servers. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 103
Blade Switch 3020 for HP Cisco IOS Commands dot1x max-req dot1x max-req Use the dot1x max-req interface configuration command to set the maximum number of times that the switch range is 1 to 10. Defaults The default is as unreliable links or specific behavioral problems with certain clients and - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 104
Displays IEEE 802.1x statistics, administrative status, and operational status for the switch or for the specified port. Displays EAP registration and session information for the switch or for the specified port. 2-76 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 105
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x port-control dot1x port-control Use the dot1x port-control interface configuration command to enable manual control of the authorization state of the port. Use the no form of this command to return to the default setting. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 106
dot1x port-control Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands • EtherChannel port-Do not IEEE 802.1x authentication on the switch, use the no dot1x system-auth-control global configuration command. To disable IEEE 802.1x authentication on a specific port or to return to - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 107
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x re-authenticate dot1x re-authenticate Use the dot1x re-authenticate privileged EXEC command to manually initiate a re-authentication of the specified IEEE 802.1x-enabled port. dot1x re-authenticate [interface interface-id] - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 108
[interface interface-id] Description Manually initiates a re-authentication of all IEEE 802.1x-enabled ports. Sets the number of seconds between re-authentication attempts. Displays IEEE 802.1x status for the specified port. 2-80 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 109
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x timeout dot1x timeout Use the dot1x timeout interface configuration 30 seconds. rate-limit is 1 second. Command Modes Interface configuration OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-81 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 110
Blade Switch 3020 for HP Cisco IOS Commands Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines You should change the default value of this command only to adjust for unusual circumstances such as unreliable links or specific behavioral problems - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 111
Sets the maximum number of times that the switch sends an EAP-request/identity frame before restarting the authentication process. Enables periodic re-authentication of the client. Displays IEEE 802.1x status for all ports. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-83 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 112
to which the switch is attached. If both ends of the line support autonegotiation, we highly recommend using the default autonegotiation settings. If one interface supports autonegotiation and when the speed is set to auto. 2-84 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 113
on setting the switch speed and duplex parameters, see the "Configuring Interface Characteristics" chapter in the software configuration guide for this release. on the switch. Sets the speed on a 10/100/1000 Mbps interface. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 114
errdisable detect cause Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands errdisable detect cause Use the errdisable detect cause global configuration command to enable error-disabled detection for a specific cause or all causes. Use the no form of this command to disable the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 115
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands errdisable detect cause Examples This example shows how to enable error-disabled detection for the link-flap error-disabled cause: Switch(config)# errdisable detect cause link-flap You can verify your setting by entering the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 116
errdisable recovery Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands errdisable recovery Use the violation udld vmps interval interval Enable the error-disabled mechanism to recover from a specific cause. Enable the timer to recover from all error-disabled causes. Enable the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 117
Blade Switch 3020 for HP Cisco IOS Commands errdisable recovery Note Though visible in the command-line help strings, the ilpower, storm-control, and unicast-flood keywords are not supported shutdown and then the no shutdown commands to manually recover an interface from the error-disabled state. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 118
exception crashinfo Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands exception crashinfo Use the exception crashinfo global configuration command to configure the switch to create the extended crashinfo file when the Cisco IOS image fails. Use the no form of this command to - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 119
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS support sending flow-control pause frames. Note that the on and desired keywords have the same result. When you use the flowcontrol command to set a port to control traffic rates during congestion, you are setting flow control on a port to one - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 120
configure the local port to not support flow control by the remote port: Switch(config)# interface gigabitethernet0/21 Switch(config-if)# flowcontrol receive off You settings on the switch, including input and output flow control. 2-92 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL- - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 121
a port channel number of 5: Switch(config)# interface port-channel 5 You can verify your setting by entering the show running-config privileged EXEC or show etherchannel channel-group-number detail privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-93 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 122
interface port-channel Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command channel-group show etherchannel show running-config Description Assigns an Ethernet port to an EtherChannel group. Displays EtherChannel information - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 123
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands interface range interface range Use the interface range global configuration command to with a single command, with each range separated by a comma. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-95 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 124
interface ranges, see the software configuration guide for this release. switch. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. 2-96 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 125
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands interface vlan interface vlan Use the interface vlan global configuration command to create operational status of all interfaces or the specified VLAN. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-97 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 126
ip access-group Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip access-group Use You can only apply ACLs in the inbound direction. • You can only apply one IP ACL and one MAC ACL per interface. • do not support logging; if the log keyword is specified in the IP ACL, it is - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 127
.2 > IP Services Commands. Displays information about interface status and configuration. For syntax information, select Cisco IOS IP Command Reference, Volume 1 of 3:Addressing and Services, Release 12.2 > IP Services Commands. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 128
the no ip address command. If the switch detects another host using one of its IP addresses, it will send switch IP address by using the no ip address command, IP processing is disabled, and the BOOTP or the DHCP server cannot reassign the address. 2-100 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 129
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip address Examples This example shows how to configure the IP address for the Layer 2 switch on a subnetted network: Switch(config)# interface vlan 1 Switch(config-if)# ip address 172.20.128.2 255.255.255.0 You can verify your - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 130
ip dhcp snooping Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip dhcp snooping Use the ip dhcp snooping global the DHCP snooping configuration. Displays the DHCP snooping binding information. 2-102 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 131
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip dhcp snooping information 82 information contains the switch MAC address (the remote ID suboption) and the port identifier, vlan-mod-port, from which the packet is received (circuit ID suboption). The switch forwards the DHCP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 132
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show ip dhcp snooping show ip dhcp snooping binding Description Displays the DHCP snooping configuration. Displays the DHCP snooping binding information. 2-104 Cisco Catalyst Blade Switch 3020 for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 133
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip dhcp snooping information option allow-untrusted ip dhcp snooping information option allow-untrusted Use the ip dhcp snooping information option allow-untrusted global configuration command on an aggregation switch to configure it - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 134
-untrusted Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to configure an access switch to not check the option-82 information in untrusted packets from an edge switch and to accept the packets: Switch(config)# ip dhcp snooping information - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 135
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip dhcp snooping information option format remote-id ip dhcp snooping information option format remote-id Use the ip dhcp snooping information option format remote-id global configuration command on the switch to configure the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 136
ip dhcp snooping information option format remote-id Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command Description ip dhcp snooping vlan information Configures the option-82 circuit-ID suboption. option format-type circuit-id string - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 137
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip dhcp snooping limit rate ip dhcp snooping limit rate Use the the DHCP snooping configuration. Displays the DHCP snooping binding information. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-109 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 138
ip dhcp snooping trust Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip dhcp snooping trust Use the ip dhcp snooping trust snooping configuration. Displays the DHCP snooping binding information. 2-110 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 139
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip dhcp snooping verify ip dhcp snooping verify Use the ip dhcp snooping verify global configuration command to configure the switch to verify on an untrusted port that the source MAC address in a DHCP packet matches the client - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 140
ip dhcp snooping vlan Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip dhcp snooping vlan Use . Examples This example shows how to enable DHCP snooping on VLAN 10: Switch(config)# ip dhcp snooping vlan 10 You can verify your settings by entering the show ip dhcp snooping - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 141
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip dhcp snooping vlan information option format-type circuit-id string ip dhcp snooping vlan information option format-type circuit-id string - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 142
ip dhcp snooping vlan information option format-type circuit-id string Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Note The show ip dhcp snooping user EXEC command only displays the global command output, including a remote-ID configuration. It does not - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 143
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp filter ip igmp filter Use the ip igmp filter interface configuration command to control whether or not all hosts on a Layer 2 interface can join one or more IP multicast groups by applying an Internet Group Management - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 144
ip igmp max-groups Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp max-groups Use the ip igmp max-groups interface entering the ip igmp max-groups {deny | replace} command has no effect. 2-116 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 145
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp max-groups Examples This example shows how to limit to 25 the number of IGMP groups that a port can join: Switch(config)# interface gigabitethernet0/2 Switch(config-if)# ip igmp max-groups 25 This example shows how to - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 146
addresses: Switch(config)# ip igmp profile 40 Switch(config-igmp-profile)# permit Switch(config-igmp-profile)# range 233.1.1.1 233.255.255.255 You can verify your settings by using the show ip igmp profile privileged EXEC command. 2-118 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 147
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp profile Related Commands Command ip igmp filter show ip igmp profile characteristics of all IGMP profiles or the specified IGMP profile number. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-119 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 148
ip igmp snooping Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp snooping Use the ip igmp snooping global configuration command to globally enable Internet Group Management Protocol (IGMP) snooping on the switch or to enable it on a per-VLAN basis. Use the no form of - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 149
snooping configuration. Displays IGMP snooping multicast information. Displays the IGMP snooping router ports. Displays the configuration and operation information for the IGMP querier configured on a switch. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-121 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 150
last-member-query-interval Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp snooping last- on a VLAN overrides the global setting. The IGMP configurable leave time is only supported on devices running IGMP Version 2. The configuration is saved in NVRAM. Examples This - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 151
on the switch or on a VLAN. Enables IGMP Immediate-Leave processing. Configures a Layer 2 port as a multicast router port. Configures a Layer 2 port as a member of a group. Displays the IGMP snooping configuration. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-123 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 152
igmp snooping querier Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp snooping the number of TCN queries to be executed during the TCN interval time. The range is 1 to 10. • interval interval-Set the TCN query interval time. The range is 1 to 255. timer expiry - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 153
(IGMPv2) but does not detect clients that are using IGMP Version 1 (IGMPv1). You can manually configure the max-response-time value when devices use IGMPv2. You cannot configure the max-response-time snooping router ports. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-125 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 154
igmp snooping report-suppression Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp snooping report- reports. This feature is not supported when the query includes IGMPv3 reports. The switch uses IGMP report suppression to forward only one IGMP report per multicast router - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 155
report-suppression Related Commands Command ip igmp snooping show ip igmp snooping Description Enables IGMP snooping on the switch or on a VLAN. Displays the IGMP snooping configuration of the switch or the VLAN. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-127 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 156
ip igmp snooping tcn Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp snooping tcn Use of IGMP general queries for which the multicast traffic is flooded. The range is 1 to 10. query solicit Send an IGMP leave message (global leave) to speed the process of recovering - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 157
Description Enables IGMP snooping on the switch or on a VLAN. Specifies flooding on an interface as the IGMP snooping spanning-tree TCN behavior. Displays the IGMP snooping configuration of the switch or the VLAN. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-129 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 158
ip igmp snooping tcn show ip igmp snooping Description Enables IGMP snooping on the switch or on a VLAN. Configures the IGMP TCN behavior on the switch. Displays the IGMP snooping configuration of the switch or the VLAN. 2-130 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 159
example shows how to enable IGMP immediate-leave processing on VLAN 1: Switch(config)# ip igmp snooping vlan 1 immediate-leave You can verify your settings by entering the show ip igmp snooping privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-131 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 160
ip igmp snooping vlan immediate-leave Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command ip igmp snooping report-suppression show ip igmp snooping show ip igmp snooping groups show ip igmp snooping mrouter - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 161
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp snooping vlan mrouter ip igmp snooping vlan mrouter Use the ip igmp useful for reducing control traffic. The configuration is saved in NVRAM. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-133 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 162
ip igmp snooping vlan mrouter Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to configure a port as a multicast router port: Switch(config)# ip igmp snooping vlan 1 mrouter interface gigabitethernet0/22 This example shows how to specify the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 163
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip igmp snooping vlan static ip igmp snooping vlan static Use the ip igmp your settings by entering the show ip igmp snooping privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-135 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 164
ip igmp snooping vlan static Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command ip igmp snooping report-suppression show ip igmp snooping show ip igmp snooping groups show ip igmp snooping mrouter - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 165
Catalyst Blade Switch 3020 for HP Cisco IOS Commands ip ssh ip ssh Use the ip ssh global configuration command to configure the switch to run Secure Shell (SSH) Version 1 or SSH Version 2. This command is available only when your switch is running the cryptographic (encrypted) software image - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 166
of the SSH server. For syntax information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Security Command Reference, Release 12.2 > Other Security Features > Secure Shell Commands. 2-138 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 167
to display LACP port priorities and internal port number values. For information about configuring LACP on physical ports, see the "Configuring EtherChannels" chapter in the software configuration guide for this release. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-139 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 168
lacp port-priority Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to configure the LACP port priority on a port: Switch(config)# interface gigabitethernet0/21 Switch(config-if)# lacp port-priority 1000 You can verify your settings by entering - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 169
the software configuration guide for this release. Examples This example shows how to set the LACP system priority: Switch(config)# lacp system-priority 20000 You can verify your settings by entering the show lacp sys-id privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 170
lacp system-priority Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command channel-group lacp port-priority show lacp . Displays the system identifier that is being used by LACP. 2-142 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 171
upstream or downstream port for a specific link-state group. If the into a link-down state. If any one of the upstream interfaces in the link these guidelines to avoid configuration problems: • Do not configure an switch. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-143 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 172
link state group Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to configure the interfaces as upstream in group 2: Switch# configure terminal Switch(config)# interface range gigabitethernet0/23 - 24 Switch(config-if)# link state group 2 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 173
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands link state track link state track Use the link state track global Release 12.2 > Cisco IOS File Management Commands > Configuration File Commands. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-145 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 174
Interface configuration Command History Release 12.2(25)SEF Modification This command was introduced. Examples This example shows how to enable spanning-tree logging: Switch(config-if)# logging event spanning-tree 2-146 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 175
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands logging file logging file Use the logging file global configuration command to History Release 12.2(25)SEF Modification This command was introduced. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-147 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 176
logging file Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Usage Guidelines The log file is stored in ASCII text format in an internal buffer on the switch. You can access logged system messages by using the switch command-line interface (CLI) or by saving them to a - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 177
supported on Layer 2 interfaces. Defaults No MAC switch forwards all packets. For more information about configuring MAC extended ACLs, see the "Configuring Network Security with ACLs" chapter in the software configuration guide for this release. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 178
access-group Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to apply a MAC extended ACL named macacl2 to an interface: Switch(config)# interface gigabitethernet0/1 Switch(config-if)# mac access-group macacl2 in You can verify your settings by - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 179
: specifies packets to forward. For more information, see the permit (MAC access-list configuration) command. For more information about MAC extended access lists, see the software configuration guide for this release. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-151 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 180
extended Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to create a MAC named extended access list named mac1 and to enter extended MAC access-list configuration mode: Switch(config)# mac access-list extended mac1 Switch(config-ext-macl)# This - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 181
Blade Switch 3020 for HP Cisco IOS Commands mac address-table aging-time mac address-table aging-time Use the mac address-table aging-time global configuration command to set the length of time that a dynamic entry remains in the MAC If you do not specify a specific VLAN, this command sets the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 182
move update messages: Switch# configure terminal Switch(conf)# mac address-table move update receive Switch(conf)# end You can verify your settings by entering the show mac address-table move update privileged EXEC command. 2-154 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 183
Catalyst Blade Switch 3020 for HP Cisco IOS Commands mac address-table move update Related Commands Command clear mac address-table move update debug matm move update show mac address-table move update Description Clears the MAC address-table move update global counters. Debugs the MAC address - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 184
address-table notification Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mac address-table notification Use the mac address-table notification global configuration command to enable the MAC address notification feature on the switch. Use the no form of this command to return - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 185
the MAC address notification settings on all interfaces or on the specified interface. Sends the SNMP MAC notification traps when the mac-notification keyword is appended. Enables the SNMP MAC notification trap on a specific interface. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 186
address-table static Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mac address-table static Use the mac address-table static global configuration command to add static addresses to the MAC address table. Use the no form of this command to remove static entries from the table - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 187
Blade Switch 3020 for HP Cisco IOS Commands mac address-table static drop mac address-table static drop Use the mac address-table static drop global configuration command to enable unicast MAC address filtering and to configure the switch to drop traffic with a specific source or destination MAC - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 188
address-table static drop Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to enable unicast MAC address filtering and to configure the switch to drop packets that have a source or destination address of c2f3.220a.12f4. When a packet is received - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 189
Blade Switch 3020 for HP Optional) Specify unique parameter values that are specific to the interface. You can enter up match of a keyword, even if it is part of a larger string, is considered a match Cisco-default Smartports macros embedded in the switch software. You can display these macros and the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 190
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples Follow these guidelines when you apply a Cisco-default Smartports macro on an interface: • Display all macros on the switch by using the show parser macro user EXEC command. Display the contents of a specific macro by using - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 191
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands macro apply # Configure port as an edge network port spanning-tree portfast spanning-tree bpduguard enable Switch# Switch# configure terminal Switch(config)# interface gigabitethernet0/4 Switch(config-if)# macro apply cisco-desktop $AVID - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 192
. Applies a macro on a switch or applies and traces a macro on a switch Adds a description about the macros that are applied to the switch. Creates a macro. Displays the macro definition for all macros or for the specified macro. 2-164 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 193
Blade Switch 3020 for HP Cisco IOS Commands macro global macro global Use the macro global global configuration command to apply a macro to a switch or to apply and trace a macro configuration on a switch values that are specific to the switch. You can embedded in the switch software. You can - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 194
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples Follow these guidelines when you apply a Cisco-default Smartports macro on a switch: • Display all macros on the switch by using the show parser macro user EXEC command. Display the contents of a specific macro by using - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 195
a description about the macros that are applied to an interface. Adds a description about the macros that are applied to the switch. Creates a macro. Displays the macro definition for all macros or for the specified macro. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-167 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 196
about the macros that are applied to an interface. Applies a macro on a switch or applies and traces a macro on a switch. Creates a macro. Displays the macro definition for all macros or for the specified macro. 2-168 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 197
Modification This command was introduced. Usage Guidelines A macro can contain up to 3000 characters. Enter one macro command per line. Use the @ character to end the macro. Use the # character macro was applied. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-169 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 198
macro name Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to create a macro that defines the duplex mode and speed: Switch(config)# macro name duplex Enter macro commands one per line. End with the character '@'. duplex full speed auto @ This - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 199
configuration command. You must enter one access list name or number; others are optional. You can match packets against one or more access lists. Matching any MAC access lists. Both IP and MAC addresses can be specified for the same map entry. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 200
IOS IP Command Reference, Volume 1 of 3:Addressing and Services, Release 12.2 > IP Services Commands. Creates a named MAC address access list. Displays the VLAN access maps created on the switch. Creates a VLAN access map. 2-172 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 201
the MAC access group matching to the Ether Type/Len are supported. To define packet classification on a physical-port basis, only one match command per class map is supported. In this situation, the match-all and match-any keywords are equivalent. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 202
ip dscp 10 command. You can enter the match ip precedence critical command, which is the same as entering the match ip precedence 5 command. For a list of supported mnemonics, enter quality of service (QoS) class maps. 2-174 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 203
Switch(config-if)# duplex auto Switch(config-if)# mdix auto Switch(config-if)# end You can verify the operational state of auto-MDIX on the interface by entering the show controllers ethernet-controller interface-id phy privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 204
Switch 3020 for HP Cisco IOS Commands Related Commands Command show controllers ethernet-controller interface-id phy Description Displays general information about internal registers of an interface, including the operational state of auto-MDIX. 2-176 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 205
Blade Switch 3020 for HP Cisco IOS Commands media-type media-type Use the media-type interface configuration command to manually select the interface and type of a dual-purpose uplink port or to enable the switch Enable the switch to dynamically select the type based on which one first links - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 206
media-type Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands If you configure auto-select, you cannot configure the speed and duplex interface configuration commands. The switch operates with 1000BASE-X (where -X is -SX) SFP modules as follows: • When the 1000BASE -X SFP module - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 207
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos mls qos Use the mls qos global configuration command to enable quality of service (QoS) for the entire switch. When the mls qos command is entered, QoS is enabled with the default parameters on all ports in the system. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 208
mls qos Related Commands Command show mls qos Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Description Displays QoS information. 2-180 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 209
Blade Switch 3020 for HP switch drop the packet. When the specified rate is exceeded, specify that the switch change the Differentiated Services Code which controls more than one physical port, supports 512 policers (512 supported per port is 63. Policers are allocated on demand by the software and - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 210
policer global configuration command. For more information, see the software configuration guide for this release. Examples This example shows how to define the quality of service (QoS) aggregate policer configuration. 2-182 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 211
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos cos mls qos cos Use the mls qos cos interface configuration command to define the default class of service (CoS) value of a port or to assign the default CoS to all incoming packets on the port. Use the no form of this - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 212
can verify your settings by entering the show mls qos interface privileged EXEC command. Related Commands Command show mls qos interface Description Displays quality of service (QoS) information. 2-184 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 213
to a port: Switch(config)# mls qos map dscp-mutation dscpmutation1 10 11 12 13 to 30 Switch(config)# interface gigabitethernet0/1 Switch(config-if)# mls qos trust dscp Switch(config-if)# mls qos dscp-mutation dscpmutation1 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-185 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 214
mls qos dscp-mutation Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands This example show how to remove the DSCP-to-DSCP-mutation map name dscpmutation1 from the port and to reset the map to the default: Switch(config-if)# no mls qos dscp-mutation dscpmutation1 You can verify - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 215
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos map mls qos map Use the mls qos map global configuration command to define the class of service (CoS)-to-Differentiated Services Code Point (DSCP) map, DSCP-to-CoS map, the DSCP-to-DSCP-mutation map, the IP-precedence-to- - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 216
mls qos map Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Defaults Table 2-6 shows the default CoS-to-DSCP map: Table 2-6 Default CoS-to-DSCP Map 1 2 3 4 5 6 7 DSCP Value 0 8 16 24 32 40 48 56 2-188 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 217
9 10 11 12 13 to 10 Switch(config)# mls qos map dscp-mutation mutation1 20 21 22 to 20 Switch(config)# mls qos map dscp-mutation mutation1 0 31 32 33 34 to 30 You can verify your settings by entering the show mls qos maps privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 218
Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command mls qos dscp-mutation show mls qos maps Description Applies a DSCP-to-DSCP-mutation map to a DSCP-trusted port. Displays quality of service (QoS) mapping information. 2-190 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 219
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos queue-set output buffers mls qos queue-set output buffers Use the mls of the egress queues and if these settings do not meet your QoS solution. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-191 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 220
the availability of buffers, and configures the maximum memory allocation to a queue-set. Maps a port to a queue-set. Displays quality of service (QoS) information. Displays egress queue settings for the queue-set. 2-192 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 221
of the four egress queues per port. The range is 1 to 2. Specific queue in the queue-set on which the command is performed. The range The range is 1 to 400 percent. Defaults When quality of service (QoS) is enabled, WTD is enabled. Table 2-9 shows Blade Switch 3020 for HP Command Reference 2-193 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 222
mls qos queue-set output threshold Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Usage Guidelines Use the mls qos queue-set QoS information. Displays egress queue settings for the queue-set. 2-194 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 223
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos rewrite ip dscp mls qos rewrite ip dscp Use the mls qos rewrite ip dscp global configuration command to configure the switch to change (rewrite) the Differentiated Services Code Point (DSCP) field of an incoming IP packet - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 224
syntax information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. 2-196 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 225
srr-queue input priority-queue 2 bandwidth 0 Switch(config)# mls qos srr-queue input bandwidth 25 75 In this example, queue 2 has three times the bandwidth of queue 1; queue 2 is serviced three times as often as queue 1. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-197 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 226
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands This example shows how to assign the ingress bandwidths for the queues. Queue 1 is the priority queue with 10 percent of the bandwidth allocated to it. The bandwidth ratio allocated to queues 1 and 2 is 4/(4+4). SRR services queue 1 (the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 227
Services Code Point (DSCP) values to an ingress queue or maps DSCP values to a queue and to a threshold ID. Configures the ingress priority queue and guarantees bandwidth. Assigns weighted tail-drop (WTD) threshold percentages to an ingress queue. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 228
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Command show mls qos input-queue show mls qos interface buffers Description Displays ingress queue settings. Displays quality of service (QoS) information. 2-200 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 229
Blade Switch 3020 for HP Cisco IOS Commands mls qos srr-queue input cos-map mls qos srr-queue input cos-map Use the mls qos srr-queue input cos-map global configuration command to map class of service Defaults Table 2-10 shows the default CoS input queue threshold map: Table 2-10 Default CoS - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 230
input cos-map Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Usage Guidelines The CoS assigned weights to an ingress queue. Allocates the buffers between the ingress queues. Maps Differentiated Services Code Point (DSCP) values to an ingress queue or maps DSCP values to - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 231
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos srr-queue input dscp-map mls qos srr-queue input dscp-map Use the mls qos srr-queue input dscp-map global configuration command to map Differentiated Services Code Point (DSCP) values to an ingress queue or to map DSCP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 232
of service (CoS) values to an ingress queue or maps CoS values to a queue and to threshold ID. Configures the ingress priority queue and guarantees bandwidth. Assigns WTD threshold percentages to an ingress queue. Displays QoS mapping information. 2-204 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 233
The priority queue is queue 2, and 10 percent of the bandwidth is allocated to jitter). The priority queue is guaranteed part of the bandwidth on the internal ring frames). Shaped round robin (SRR) services the priority queue for its configured weight Blade Switch 3020 for HP Command Reference 2-205 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 234
Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to assign the ingress bandwidths for the queues. Queue 1 is the priority queue with 10 the buffers between the ingress queues. Maps class of service (CoS) values to an ingress queue or maps CoS values to a - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 235
quality of service (QoS and one preset Switch(config)# mls qos srr-queue input threshold 2 70 100 You can verify your settings by entering the show mls qos interface [interface-id] buffers or the show mls qos input-queue privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 236
srr-queue input threshold Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command mls qos bandwidth. Displays ingress queue settings. Displays quality of service (QoS) information. 2-208 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 237
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos srr-queue output cos-map mls qos srr-queue output cos-map Use the mls qos srr-queue output cos-map global configuration command to map class of service (CoS) values to an egress queue or to map CoS values to a queue and - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 238
queue output cos-map Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Usage Guidelines The drop-threshold qos interface buffers show mls qos maps show mls qos queue-set Description Maps Differentiated Services Code Point (DSCP) values to an egress queue or maps DSCP values to a - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 239
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos srr-queue output dscp-map mls qos srr-queue output dscp-map Use the mls qos srr-queue output dscp-map global configuration command to map Differentiated Services Code Point (DSCP) values to an egress or to map DSCP values - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 240
, and configures the maximum memory allocation to a queue-set. Maps a port to a queue-set. Displays quality of service (QoS) information. Displays QoS mapping information. Displays egress queue settings for the queue-set. 2-212 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 241
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos trust mls qos trust Use the mls qos trust interface configuration command to configure the port trust state. Ingress traffic can be trusted, and classification is performed by examining the packet Differentiated Services Code Point - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 242
Blade Switch 3020 for HP Cisco IOS Commands The trusted boundary feature prevents security problems if users disconnect their PCs from networked Cisco IP Phones and connect them to the switch example, service-policy input policy-map-name) are mutually exclusive. The last one configured overwrites - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 243
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos vlan-based mls qos vlan-based Use the mls qos vlan-based interface configuration command to enable VLAN-based quality of service (QoS) on the physical port. Use the no form of this command to disable this feature. mls qos - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 244
Catalyst Blade Switch 3020 for HP Cisco IOS Commands monitor session Use the monitor session global configuration command to start a new Switched Port SPAN or RSPAN session, and to limit (filter) SPAN source traffic to specific VLANs. Use the no form of this command to remove the SPAN or RSPAN - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 245
a list of VLANs as filters on trunk source ports to limit SPAN source traffic to specific VLANs. The vlan-id range is 1 to 4094. Specify the SPAN or RSPAN source a switch. You can have a maximum of 64 destination ports on a switch. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2- - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 246
be a SPAN or RSPAN source, nor can a port be a destination port for more than one session at a time. You can enable IEEE 802.1x authentication on a port that is a only; RSPAN does not support encapsulation replication.) 2-218 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 247
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands monitor session Examples This example shows how to create a local SPAN session 1 to monitor both sent and received traffic on source port 21 to destination port 22: Switch(config)# monitor session 1 source interface - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 248
. No IP multicast addresses are configured on the switch by default. The default group ip address count is 0. The default query response time is 5 tenths of or one-half second. The default multicast VLAN for MVR is VLAN 1. 2-220 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 249
as one second (10 tenths): Switch(config)# mvr querytime 10 This example shows how to set VLAN 2 as the multicast VLAN: Switch(config)# mvr vlan 2 You can verify your settings by entering the show mvr privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 250
mvr (global configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command mvr (interface configuration) show mvr show mvr interface show mvr members Description Configures MVR ports. Displays MVR global parameters - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 251
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mvr (interface configuration) mvr (interface configuration) Use the mvr interface configuration command )SEF Modification This command was introduced. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-223 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 252
. With Immediate Leave, an IGMP MAC-based query is not sent from Switch(config)# interface gigabitethernet0/22 Switch(config-if)# mvr vlan1 group 230.1.23.4 You can verify your settings by entering the show mvr members privileged EXEC command. 2-224 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 253
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mvr (interface configuration) Related Commands Command mvr (global configuration) show mvr show mvr interface show mvr members Description Enables and configures multicast VLAN registration on the switch. Displays MVR global - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 254
of the link. Note The switch supports address learning only on aggregate ports MAC address by using the port-channel load-balance src-mac global configuration command. Use the pagp learn-method interface configuration command only in this situation. 2-226 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 255
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands pagp learn-method Examples This example shows how to set the learning method to learn the address on the physical port within the EtherChannel: Switch(config-if)# pagp learn-method physical-port This example shows how to set the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 256
port priority to 200: Switch(config-if)# pagp port-priority 200 You can verify your setting by entering the show running-config privileged EXEC command or the show pagp channel-group-number internal privileged EXEC command. 2-228 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 257
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands pagp port-priority Related Commands Command pagp learn-method show , Release 12.2 > File Management Commands > Configuration File Management Commands. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-229 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 258
Blade Switch 3020 for HP Cisco IOS Commands permit (MAC access-list configuration) Use the permit MAC supported as a matching condition. Syntax Description any host src-MAC-addr | src-MAC-addr mask host dst-MAC-addr | dst-MAC (Optional) Select an arbitrary class of service (CoS) number from 0 to 7 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 259
Virtual Integrated Network Service (VINES) Echo mac access-list extended global configuration command. If you use the host keyword, you cannot enter an address mask; if you do not use the any or host keywords, you must enter an address mask. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 260
about MAC-named extended access lists, see the software configuration guide for this release. Examples This example shows how to define the MAC-named MAC addresses for non-IP traffic. Displays access control lists configured on a switch. 2-232 Cisco Catalyst Blade Switch 3020 for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 261
Blade Switch 3020 for HP switch drop the packet. (Optional) When the specified rate is exceeded, specify that the switch changes the Differentiated Services which controls more than one physical port, supports 512 policers (512 supported per port is 63. Policers are allocated on demand by the software - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 262
For more information, see the software configuration guide for this release. Examples service (QoS) policy maps. Defines a trust state for traffic classified through the class policy-map configuration or the class-map global configuration command. 2-234 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 263
Cisco Catalyst Blade Switch 3020 for HP Cisco ASIC device, which controls more than one physical port, supports supports 512 policers (512 user-configurable policers of user-configurable policers supported per port is 63. Policers are allocated on demand by the software and are constrained by the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 264
aggregate-policer show mls qos aggregate-policer Description Defines policer parameters, which can be shared by multiple classes within a policy map. Displays the quality of service (QoS) aggregate policer configuration. 2-236 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 265
Blade Switch 3020 for HP Cisco IOS Commands policy-map policy-map Use the policy-map global configuration command to create or modify a policy map that can be attached to multiple physical ports or switch Services Code Point (DSCP) to 0 if the packet is an IP packet and to set the class of service - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 266
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples Only one policy map per ingress port or SVI is supported. You can apply on SVIs" section in the "Configuring QoS" chapter of the software configuration guide for this release. This example shows how to create a policy - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 267
. Creates a class map to be used for matching packets to the class whose name you specify. Applies a policy map to a port. Displays the quality of service (QoS) policy maps attached to an SVI. Displays QoS policy maps. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-239 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 268
method to dst-mac: Switch(config)# port-channel load-balance dst-mac You can verify your setting by entering the show running-config privileged EXEC command or the show etherchannel load-balance privileged EXEC command. 2-240 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 269
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands port-channel load-balance Related Commands Command interface port- Release 12.2 > File Management Commands > Configuration File Management Commands. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-241 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 270
are affected because there is one fewer queue participating in SRR. shaped weights are not configured, SRR services the queue in shared mode. Examples Switch(config)# interface gigabitethernet0/22 Switch(config-if)# srr-queue bandwidth shape 25 0 0 0 2-242 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 271
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands priority-queue Switch(config-if)# srr-queue bandwidth share 30 20 25 25 Switch(config-if)# no priority-queue out You can verify your settings by entering the show mls qos interface interface-id queueing or the show running- - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 272
-set. Configures the weighted tail-drop (WTD) thresholds, guarantees the availability of buffers, and configures the maximum memory allocation to a queue-set. Displays quality of service (QoS) information. 2-244 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 273
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands radius-server dead-criteria radius- to 100. Defaults The switch dynamically determines the seconds value that is from 10 to 60 seconds. The switch dynamically determines the tries value that is from 10 to 100. Command Modes - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 274
dead-criteria Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to configure 60 as the time and 10 as the number of tries, the conditions that determine when a RADIUS server is considered unavailable Switch(config)# radius-server dead-criteria - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 275
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands radius-server host radius-server host Use the radius-server host global SEF Modification This command was introduced. This command was introduced. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-247 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 276
Displays the running configuration on the switch. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. 2-248 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 277
Blade Switch 3020 for HP Cisco IOS Commands remote-span remote-span Use the remote-span VLAN configuration command to configure a VLAN as a Remote Switched , you must manually configure intermediate switches (those in the RSPAN VLAN between the source switch and the destination switch). Before you - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 278
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to configure a VLAN as an RSPAN VLAN. Switch(config)# vlan 901 Switch(config-vlan)# remote-span This example shows how to remove the RSPAN feature from a VLAN. Switch(config)# vlan 901 Switch(config-vlan - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 279
2] Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands rmon collection stats rmon collection stats Use the rmon collection Command Reference, Release 12.2 > System Management Commands > RMON Commands. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-253 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 280
Blade Switch 3020 for HP Cisco IOS Commands service password-recovery Use the service password-recovery global configuration command to enable the password-recovery mechanism (the default). This mechanism allows an end user with physical access to the switch the software configuration guide for - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 281
software# flash_init load_helper boot Note If you use the no service Switch(config)# no service-password recovery Switch(config)# exit Related Commands Command show version Description Displays version information for the hardware and firmware. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 282
maps, see the "Configuring QoS" chapter in the software configuration guide for this release. Classification using a port trust service-policy input policy-map-name) are mutually exclusive. The last one configured overwrites the previous configuration. 2-256 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 283
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands service-policy Examples This example shows how to apply plcmap1 to an physical ingress port: Switch(config)# interface gigabitethernet0/21 Switch(config-if)# service-policy input plcmap1 This example shows how to remove plcmap2 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 284
-policy Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command policy-map show policy-map show running-config Description Creates or modifies a policy map that can be attached to multiple ports to specify a service policy. Displays QoS policy maps. Displays - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 285
Blade Switch 3020 for HP Cisco IOS Commands set set Use the set policy-map class configuration command to classify IP traffic by setting a Differentiated Services dscp af11 command, which is the same as entering the set dscp 10 command. You can enter the set ip precedence critical command, which is - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 286
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands set Examples This example shows how to assign DSCP 10 to all FTP traffic without any policers: Switch(config)# policy-map policy_ftp Switch(config-pmap)# class ftp_class Switch(config-pmap-c)# set dscp 10 Switch(config-pmap)# - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 287
Catalyst Blade Switch 3020 for HP Cisco IOS Commands setup setup Use the setup privileged EXEC command to configure the switch with , an interactive dialog, called the System Configuration Dialog, appears. It guides you through the configuration process and prompts you for information. The values - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 288
setup Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Enter host name [Switch]:host-name The enable secret is used when you do not specify an enable secret password, with some older software versions, and some boot images. Enter enable password: enable-password The virtual - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 289
information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. Displays version information for the hardware and firmware. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-263 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 290
valid on the switch, and your connection using this IP address ends. The primary purpose of the no setup express command is to prevent someone from deleting the switch configuration by pressing the Mode button for 10 seconds. 2-264 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 291
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands setup express Examples This example shows how to enable Express Setup mode: Switch(config)# setup express You can verify that Express Setup mode is enabled by pressing the Mode button: • On an unconfigured switch, the LEDs above - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 292
This is an example of output from the show access-lists command: Switch# show access-lists Standard IP access list 1 10 permit 1.1.1.1 20 permit 2.2.2.2 30 permit any 40 permit 0.255.255.255, wildcard bits 12.0.0.0 2-266 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 293
Blade Switch 3020 for HP Cisco IOS Commands show access-lists OL-8916-01 Standard IP access list videowizard_1-1-1-1 10 permit 1.1.1.1 Standard IP access list videowizard_10-10-10-10 10 permit 10.10.10.10 Extended IP access list 121 10 permit ahp host 10.10.10.10 host 20.20.10.10 precedence - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 294
list on the switch. For syntax information, select Cisco IOS IP Command Reference, Volume 1 of 3:Addressing and Services, Release 12.2 > IP Services Commands. Configures a named or numbered MAC access list on the switch. 2-268 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 295
status VERIFY: Verifying software Switch# show archive status RELOAD: Upgrade completed. Reload pending Related Commands Command archive download-sw Description Downloads a new image from a TFTP server to the switch. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-269 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 296
Blade Switch 3020 for HP Cisco IOS Commands show auto qos Use the show auto qos user EXEC command to display the quality of service -QoS command entered on a specific interface. Use the show running configuration that might be affected by auto-QoS, use one of these commands: • show mls qos • show - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 297
dscp-map queue 4 threshold 1 8 mls qos srr-queue output dscp-map queue 4 threshold 2 9 10 11 12 13 14 15 mls qos srr-queue output dscp-map queue 4 threshold 3 0 1 2 3 4 5 6 7 mls qos queue-set output 1 threshold 1 138 138 92 138 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-271 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 298
show auto qos Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands mls qos queue-set output 1 threshold 100 272 mls qos queue-set output 2 threshold 4 42 72 100 242 mls qos queue-set output 1 buffers 10 10 26 54 mls qos queue-set output 2 buffers 16 6 17 61 mls qos ! ! ! ! no file - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 299
-mz-122.25.SEF/cbs30x0-lanbase-mz-122.25.SEF.binConfig file: flash:/config.text Private Config file: flash:/private-config Enable Break: no Manual Boot: yes HELPER path-list: NVRAM/Config file buffer size: 32768 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-273 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 300
show boot Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Table 2-15 show boot Field Descriptions Field BOOT path-list Config file Private Config file Enable Break Manual Boot Helper path-list Description Displays a semicolon separated list of executable files to try to - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 301
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show cable-diagnostics tdr show cable TDR is supported only on 10/100/1000 copper Ethernet ports. It is not supported on SFP module ports.For more information about TDR, see the software configuration guide for this release - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 302
issued on Gi/22 If an interface does not support TDR, this message appears: % TDR test is not supported on switch 1 Related Commands Command test cable-diagnostics tdr Description Enables and runs TDR on an interface. 2-276 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 303
Catalyst Blade Switch 3020 for HP Cisco IOS Commands show class-map show class-map Use the show class-map user EXEC command to display quality of service map command: Switch> show class-map Class Map match-all videowizard_10-10-10-10 (id 2) Match access-group name videowizard_10-10-10-10 Class Map - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 304
controllers cpu-interface Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers cpu-interface display provides information that might be useful for Cisco technical support representatives troubleshooting the switch. Expressions are case sensitive. For example, if you - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 305
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers cpu-interface Supervisor ASIC receive-queue parameters queue 0 operational status of all interfaces or a specified interface. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-279 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 306
Cisco technical support representatives troubleshooting the switch. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output are not displayed, but the lines that contain Output are displayed. 2-280 Cisco Catalyst Blade Switch 3020 for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 307
Catalyst Blade Switch 3020 for HP 127 byte frames 0 9 collision frames 0 128 to 255 byte frames 0 10 collision frames 0 256 to 511 byte frames 0 11 collision frames 0 512 of frames that are successfully sent on an interface after one collision occurs. 2 collision frames The number of frames - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 308
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Table successfully sent on an interface after nine collisions occur. 10 collision frames The number of frames that are successfully of frames that are not successfully sent after one collision occurs. 1. CFI = Canonical Format Indicator - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 309
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers ethernet-controller Table 2-18 Receive Field Descriptions (continued) Field Description FCS value but does not include the VLAN tag. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-283 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 310
ethernet-controller Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Table 2-18 Receive 0000 0000 0000 0000 LED Control : 0100 0001 0000 0000 Manual LED Override : 0000 1000 0010 1010 Extended PHY Specific Control : 0000 0000 0001 1010 Disable Receiver 1 : 0000 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 311
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers ethernet-controller OL-8916 Too Old Frames 0 System Fcs Error Frames 0 Sup Queue 8 Drop Frames 0 Sup Queue 9 Drop Frames 0 Sup Queue 10 Drop Frames Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-285 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 312
show controllers ethernet-controller Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands 0 Sup Queue 3 Drop collision frames 0 7 collision frames 0 8 collision frames 0 9 collision frames 0 10 collision frames 0 11 collision frames 0 12 collision frames 0 13 collision frames - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 313
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers ethernet-controller Related Commands Command show controllers cpu-interface and for TCAM interface ASICs that are CAM controllers. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-287 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 314
show controllers tcam Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers tcam Use display provides information that might be useful for Cisco technical support representatives troubleshooting the switch. Expressions are case sensitive. For example, if you enter - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 315
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers tcam HRR3: 00000000_00000000 HRR4: 00000000_00000000 HRR5: 00000000_00000000 HRR6: 00000000_00000000 HRR7: 00000000_00000000 GMR31: FF_FFFFFFFF_FFFFFFFF GMR32: FF_FFFFFFFF_FFFFFFFF GMR33: - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 316
show controllers utilization Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers utilization Use the show controllers utilization user EXEC command to display bandwidth utilization on the switch or specific ports. show controllers [interface-id] utilization [ | { - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 317
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers utilization Table 2-19 show controllers utilization Field Descriptions Field Description Receive Bandwidth Percentage Displays the received bandwidth usage of the switch, which is the Utilization sum of the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 318
contain Output appear. Examples This is an example of output from the show dot1x user EXEC command: Switch> show dot1x Sysauthcontrol Dot1x Protocol Version Critical Recovery Delay Critical EAPOL Enabled 2 100 Disabled 2-292 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 319
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show dot1x OL-8916-01 This is an example of output from the show dot1x all user EXEC command: Switch> show dot1x all Sysauthcontrol Dot1x Protocol Version Critical Recovery Delay Critical EAPOL Enabled 2 100 Disabled Dot1x - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 320
show dot1x Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands SuppTimeout ReAuthPeriod ReAuthMax MaxReq TxPeriod RateLimitPeriod = 30 = 3600 (Locally configured) = 2 = 2 = 30 = 0 Dot1x Authenticator Client List Empty This is an example of output - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 321
in the IEEE 802.1x Version 1 format. Source MAC address carried in the most recently received EAPOL frame. Related Commands Command dot1x default Description Resets the IEEE 802.1x parameters to their default values. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-295 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 322
show dtp Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show dtp Use the show dtp privileged EXEC command to display Dynamic Trunking Protocol (DTP) information for the switch or for a specified interface. show dtp [interface interface-id] [ | {begin | exclude | include} - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 323
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show dtp Statistics ---------3160 packets received (3160 good) 0 packets dropped 0 nonegotiate, 0 bad version, 0 domain mismatches, 0 bad TLVs, 0 other 6320 packets output (6320 good) 3160 native, 3160 software encap isl, 0 isl - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 324
Blade Switch 3020 for HP Cisco IOS Commands show eap Use the show eap privileged EXEC command to display Extensible Authentication Protocol (EAP) registration and session information for the switch method registrations. • transport name keyword-The specific lower-level registrations. When you use - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 325
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show eap Examples • method name keyword-The specified EAP method. • (s): 30 (30) Current ID: 2 Available local methods: None OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-299 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 326
(s): 1 Retransmit timeout (s): 30 (30) Current ID: 2 Available local methods: None Related Commands Command clear eap sessions Description Clears EAP session information for the switch or for the specified port. 2-300 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 327
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show env show env Use the show env user EXEC command to display temperature information for the switch. show env {all | | temperature} [ | {begin | exclude | include} expression] Syntax Description all temperature | begin | - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 328
show errdisable detect Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show errdisable detect Use the show errdisable detect user EXEC command to display error-disabled detection status. show errdisable detect [ | {begin | exclude | - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 329
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show errdisable detect Related Commands Command errdisable detect cause show errdisable flap-values show errdisable recovery show interfaces status Description Enables error-disabled detection for a specific cause or all causes - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 330
. Examples This is an example of output from the show errdisable flap-values command: Switch> show errdisable flap-values ErrDisable Reason Flaps Time (sec) pagp-flap 3 30 dtp-flap 3 30 link-flap 5 10 2-304 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 331
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show errdisable flap-values Related Commands Command errdisable detect cause show errdisable detect show errdisable recovery show interfaces status Description Enables error-disabled detection for a specific cause or all causes - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 332
show errdisable recovery Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show errdisable recovery Use the show errdisable recovery user EXEC command to display the error-disabled recovery timer information. show errdisable recovery [ | { - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 333
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show errdisable recovery Interfaces that will be enabled at the next timeout: interface status or a list of interfaces in error-disabled state. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-307 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 334
show etherchannel Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show etherchannel Use the show etherchannel user EXEC . Display the protocol that is being used in the EtherChannel. Display a one-line summary per channel-group. (Optional) Display begins with the line that - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 335
Blade Switch 3020 for HP Cisco IOS Commands show etherchannel Examples This is an example of output from the show etherchannel 1 detail command: Switch> Age of the Port-channel = 01d:20h:20m:26s Logical slot/port = 10/1 Number of ports = 2 HotStandBy port = null Port state = Port-channel - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 336
show etherchannel Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Group Port-channel Protocol Ports 1 Po1(SU) LACP Gi0/21(P) Gi0/22(P) This is an example of output from the show etherchannel 1 port-channel command: Switch> show etherchannel 1 port-channel Port- - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 337
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show flowcontrol show flowcontrol Use flow control status and statistics on the switch or for a specific interface. Use the show flowcontrol command to display information about all the switch interfaces. The output from the show - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 338
show flowcontrol Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands This is an example of output from the show flowcontrol interface interface-id command: Switch> show flowcontrol gigabitethernet0/22 Port Send FlowControl Receive FlowControl admin oper admin oper Gi0/22 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 339
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS . Note The display shows only packets processed in software; hardware-switched packets do not appear. (Optional) Display the on the switch.The only valid module number is 1. This option is not available if you entered a specific interface ID. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 340
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS , mac-accounting, precedence, random-detect, rate-limit, and shape keywords are not supported. txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 341
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show interfaces Queueing strategy: fifo Output queue :0/40 for an interface. Switch# show interfaces gigabitethernet0/21 capabilities GigabitEthernet0/2 Model: WS-CBS3020-HPQ Type: 10/100/1000BaseTX Speed: 10,100,1000,auto - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 342
/22 notconnect Gi0/23 notconnect Gi0/24 notconnect Vlan 1 1 1 1 Duplex auto auto auto auto Speed Type auto 10/100/1000BaseTX auto 10/100/1000BaseTX auto 10/100/1000BaseTX auto 10/100/1000BaseTX 2-316 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 343
Blade Switch 3020 for HP Cisco IOS Commands show interfaces This is an example of output from the show interfaces status err-disabled command. It displays the status of interfaces in the error-disabled state. Switch supported in this release, so those fields are not applicable. Switch :10 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 344
show interfaces Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Table 2-21 show interfaces switchport . Displays the VLAN ID on which voice VLAN is enabled. Displays the class of service (CoS) setting of the data packets of the IP phone. This is an example of output - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 345
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show interfaces This is an example of output from the show interfaces interface-id transceiver properties command: Switch# show interfaces gigabitethernet0/21 transceiver properties Name : Gi0/21 Administrative Speed: auto - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 346
protected Isolates unicast, multicast, and broadcast traffic at Layer 2 from other protected ports on the same switch. switchport trunk pruning Configures the VLAN pruning-eligible list for ports in trunking mode. 2-320 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 347
Blade Switch 3020 for HP Cisco IOS Commands show interfaces counters show interfaces counters Use the show interfaces counters privileged EXEC command to display various counters for the switch or for a specific vlan vlan-id keyword is not supported. Command Modes Privileged EXEC Command History - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 348
Blade Switch 3020 for HP Cisco IOS Commands This is an example of partial output from the show interfaces counters protocol status command for all interfaces. Switch IP, Spanning Tree, CDP GigabitEthernet0/9: Other, IP GigabitEthernet0/10: Other, IP GigabitEthernet0/11: Other, IP GigabitEthernet0/12 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 349
the show inventory command: switch# show inventory 3NAME: "1", DESCR: "WS-CBS3020-HPQ" PID: WS-CBS3020-HPQ , VID: V01, SN: FHH1004H095 NAME: "GigabitEthernet0/17", DESCR: "1000BaseSX SFP" PID: , VID: , SN: FNS0815T2AA OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-323 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 350
show ip dhcp snooping Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show ip dhcp snooping Use the show ip dhcp show ip dhcp snooping binding Displays the DHCP snooping binding information. 2-324 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 351
MAC specific IP address: Switch> show ip dhcp snooping binding 10.1.2.150 MacAddress IpAddress Lease(sec) Type 01:02:03:04:05:06 10.1.2.150 9810 dhcp-snooping Total number of bindings: 1 VLAN ---20 Interface GigabitEthernet0/21 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 352
Blade Switch 3020 for HP Cisco IOS Commands This example shows how to display the DHCP snooping binding entries for a specific MAC address: Switch Switch> show ip dhcp snooping binding vlan 20 MacAddress IpAddress Lease(sec) 01:02:03:04:05:06 10.1.2.150 9747 00:00:00:00:00:02 10.1.2.151 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 353
.255 Switch# show ip igmp profile IGMP Profile 3 range 230.9.9.0 230.9.9.0 IGMP Profile 4 permit range 229.9.9.0 229.255.255.255 Related Commands Command ip igmp profile Description Configures the specified IGMP profile number. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 354
Blade Switch 3020 for HP Cisco IOS Commands show ip igmp snooping Use the show ip igmp snooping user EXEC command to display the Internet Group Management Protocol (IGMP) snooping configuration of the switch It shows snooping characteristics for a specific VLAN. Switch# show ip igmp snooping vlan 1 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 355
table for the switch. Displays IGMP snooping multicast router ports for the switch or for the specified multicast VLAN. Displays the configuration and operation information for the IGMP querier configured on a switch. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-329 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 356
groups Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show ip igmp snooping groups Use the show ip igmp snooping groups privileged EXEC command to display the Internet Group Management Protocol (IGMP) snooping multicast table for the switch or the multicast information. Use - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 357
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show ip igmp snooping groups Examples This is an example of output from the show ip igmp snooping groups command without any keywords. It displays the multicast table for the switch. Switch# show ip igmp snooping groups Vlan - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 358
Blade Switch 3020 for HP Cisco IOS Commands show ip igmp snooping mrouter Use the show ip igmp snooping mrouter privileged EXEC command to display the Internet Group Management Protocol (IGMP) snooping dynamically learned and manually router ports on the switch or for a specific VLAN. VLAN IDs 1002 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 359
adds a Layer 2 port as a member of a multicast group. Displays the IGMP snooping configuration of the switch or the VLAN Displays IGMP snooping multicast information for the switch or for the specified parameter. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-333 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 360
querier Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show ip igmp snooping querier Use the show ip igmp snooping querier detail user EXEC command to display the configuration and operation information for the IGMP querier configured on a switch. show ip igmp snooping - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 361
Description Enables IGMP snooping on the switch or on a VLAN. Enables the IGMP querier function in Layer 2 networks. Displays IGMP snooping multicast router ports for the switch or for the specified multicast VLAN. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-335 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 362
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS is made up of the LACP system priority and the switch MAC address. (Optional) Display begins with the line that matches to display the active channel-group information. To display specific channel information, enter the show lacp command with a - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 363
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show lacp Examples This is an example of output from the show lacp counters user EXEC command. Table 2-23 describes the fields in the display. Switch> show lacp counters LACPDUs Marker Marker Response LACPDUs Port Sent - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 364
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Table 2-24 describes the fields in the display: Table 2-24 show lacp internal Field Descriptions Field State LACP Port Priority Admin Key Oper Key Port Number Port State Description State of the specific port. These are the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 365
MAC address associated to the system. Related Commands Command clear lacp lacp port-priority lacp system-priority Description Clears the LACP channel-group information. Configures the LACP port priority. Configures the LACP system priority. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 366
link state group Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show link state group Use display information about all link-state groups. Enter the group number to display information specific to the group. Enter the detail keyword to display detailed information about the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 367
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show link state group Related Commands Command link state group link state 12.2 > Cisco IOS File Management Commands > Configuration File Commands. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-341 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 368
access-group Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac access-group Use the show mac access-group user EXEC command to display the MAC access control lists (ACLs) configured for an interface or a switch. show mac access-group [interface interface-id] [ | {begin - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 369
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac access-group Related Commands Command mac access-group Description Applies a MAC access group to an interface. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-343 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 370
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table Use the show mac address-table user EXEC command to display a specific MAC address table static and dynamic entry or the MAC address table static and dynamic entries on a specific interface or VLAN. show - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 371
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table Related Commands Command Description clear mac address-table dynamic Deletes from the MAC address table a specific dynamic address, all dynamic addresses on a particular interface, or all dynamic - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 372
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table address Use the show mac address-table address user EXEC command to display MAC address table information for the specified MAC address. show mac address-table address mac-address [interface interface-id - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 373
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table address Command Description show mac address-table interface Displays the MAC address table information for the specified interface. show mac address-table notification Displays the MAC address notification - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 374
-table aging-time Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table aging-time Use the show mac address-table aging-time user EXEC command to display the aging time of a specific address table instance, all address table instances on a specified VLAN - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 375
Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table count show mac address-table count Command Description mac address-table aging-time Sets the length of time that a dynamic entry remains in the MAC address table after the entry is used or updated. show mac address - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 376
all interfaces or the specified interface. show mac address-table static Displays static MAC address table entries only. show mac address-table vlan Displays the MAC address table information for the specified VLAN. 2-350 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 377
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table dynamic show mac address-table dynamic Use the show mac address-table dynamic user EXEC command to display only dynamic MAC address table entries. show mac address-table dynamic [address mac-address] [interface - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 378
dynamic Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command clear mac address-table dynamic show mac address-table address show mac address-table aging-time show mac address-table count show mac address-table interface show mac address-table static show - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 379
Blade Switch 3020 for HP Cisco IOS Commands show mac address-table interface show mac address-table interface Use the show mac address-table interface user command to display the MAC address table information for the specified interface in the specified VLAN. show mac for a specific VLAN; the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 380
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show mac address-table address show mac address-table aging-time show mac address-table count show mac address-table dynamic show mac address-table notification show mac address-table static show mac address-table - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 381
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table move update show mac address-table move update Use the show mac address-table move update user EXEC command to display the MAC address-table move update information on the switch. show mac address-table move - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 382
Commands Command clear mac address-table move update mac address-table move update {receive | transmit} Description Clears the MAC address-table move update counters. Configures MAC address-table move update on the switch. 2-356 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 383
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table notification show mac address-table notification Use the show mac address-table notification user EXEC command to display the MAC address notification settings for all interfaces or the specified interface. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 384
information for the specified interface. show mac address-table static Displays static MAC address table entries only. show mac address-table vlan Displays the MAC address table information for the specified VLAN. 2-358 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 385
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table static show mac address-table static Use the show mac address-table static user EXEC command to display only static MAC address table entries. show mac address-table static [address mac-address] [interface - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 386
Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command mac address-table static mac address-table static drop show mac address-table address show mac address-table aging-time show mac address-table count show mac address-table dynamic show mac address-table interface show mac - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 387
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table vlan show mac address-table vlan Use the show mac address-table vlan user EXEC command to display the MAC address table information for the specified VLAN. show mac address-table vlan vlan-id [ | {begin | - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 388
vlan Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show mac address-table address show mac address-table aging-time show mac address-table count show mac address-table dynamic show mac address-table interface show mac address-table notification show - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 389
and Differentiated Services Code Point (DSCP) transparency is disabled: Switch> show mls qos QoS is enabled QoS ip packet dscp rewrite is disabled Related Commands Command mls qos Description Enables QoS for the entire switch. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 390
show mls qos aggregate-policer Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mls qos aggregate-policer Use the show mls qos aggregate-policer user EXEC command to display the quality of service (QoS) aggregate policer configuration. A policer defines a maximum - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 391
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mls qos input-queue show mls qos input-queue Use the show mls qos input-queue user EXEC command to display quality of service (QoS) settings for the ingress queues. show mls qos input-queue [ | {begin | exclude | include} - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 392
Services Code Point (DSCP) values to an ingress queue and assigns DSCP values to a queue and to a threshold ID. Configures the ingress priority queue and guarantees bandwidth. Assigns weighted tail-drop (WTD) threshold percentages to an ingress queue. 2-366 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 393
Blade Switch 3020 for HP Cisco IOS Commands show mls qos interface show mls qos interface Use the show mls qos interface user EXEC command to display quality of service command-line help string, the policers keyword is not supported. Command Modes User EXEC Command History Release 12.2(25)SEF - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 394
40 - 44 : 0 0 0 0 0 45 - 49 : 0 0 0 6 0 50 - 54 : 0 0 0 0 0 55 - 59 : 0 0 0 0 0 60 - 64 : 0 0 0 0 dscp: outgoing 0 - 4 : 363949 0 0 0 0 5- 9: 0 0 0 0 0 10 - 14 : 0 0 0 0 0 2-368 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 395
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mls qos interface Table 2-25 Field DSCP CoS Policer 15 - 19 : 0 0 0 0 0 20 - 24 : 0 0 0 0 0 25 - 29 : 0 0 0 0 0 30 - 34 : 0 0 0 0 0 35 - 39 : 0 0 0 0 0 40 - 44 : 0 0 0 0 0 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 396
show mls qos interface Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Command mls qos srr-queue output dscp-map policy-map and enables bandwidth sharing on the four egress queues mapped to a port. 2-370 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 397
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mls qos maps show mls qos maps Use the show mls qos maps user EXEC command to display quality of service (QoS) mapping information. During classification, QoS uses the mapping tables to represent the priority of the traffic - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 398
show mls qos maps Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands The DSCP input queue threshold output from the show mls qos maps command: Switch> show mls qos maps Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 399
1-1 1-1 Dscp-dscp mutation map: Default DSCP Mutation Map: d1 : d2 0 1 2 3 4 5 6 7 8 9 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 ID. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-373 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 400
show mls qos queue-set Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mls qos queue-set Use the show mls qos queue-set user EXEC command to display quality of service (QoS) settings for the egress queues. show mls qos queue-set [qset-id] [ | {begin | exclude | include} - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 401
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mls qos queue-set Related Commands Command Description mls qos queue- of buffers, and configures the maximum memory allocation of the queue-set. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-375 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 402
-based quality of service (QoS) is 10 Vlan10 Attached policy-map for Ingress:pm-test-pm-2 Related Commands Command policy-map Description Creates or modifies a policy map that can be attached to multiple ports and enters policy-map configuration mode. 2-376 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 403
Blade Switch 3020 for HP Cisco IOS Commands show monitor show monitor Use the show monitor user EXEC command to display information about all Switched Port Analyzer (SPAN) and Remote SPAN (RSPAN) sessions on the switch. Use the command with keywords to show a specific the lower one first, separated - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 404
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This is an example of output for the show monitor user EXEC command: Switch# show 10 Both : 1-9 Dest RSPAN VLAN : 105 This is an example of output for the show monitor user EXEC command for local SPAN source session 1: Switch - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 405
either compatible (for interoperability with Catalyst 2900 XL and Catalyst 3500 XL switches) or dynamic (where operation is consistent with IGMP snooping operation and dynamic MVR membership on source ports is supported). OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-379 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 406
show mvr Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command Description mvr (global configuration) Enables and configures multicast VLAN registration on the switch. mvr (interface configuration) Configures MVR ports. show mvr interface Displays the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 407
Blade Switch 3020 for HP Cisco IOS Commands show mvr interface show mvr interface Use the show mvr interface privileged EXEC command without keywords to display the Multicast VLAN Registration (MVR) receiver and source ports. Use the command with keywords to display MVR parameters for a specific - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 408
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands In the preceding display, Status is defined as follows: • Active means the port is part of a VLAN. • Up/Down means that the port is forwarding/nonforwarding. • Inactive means that the port is not yet part of any VLAN. This - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 409
INACTIVE 239.255.0.6 INACTIVE 239.255.0.7 INACTIVE 239.255.0.8 INACTIVE 239.255.0.9 INACTIVE 239.255.0.10 INACTIVE Members ------Gi0/1(d), Gi0/(s) None None None None None None None None None OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-383 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 410
show mvr members Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands This is an example of output from the show mvr members ip-address command. It displays the members of the IP multicast group with that address: Switch# show mvr members 239.255.0.2 239.255.003.--22 ACTIVE Gi0 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 411
is sending Slow hello. A - Device is in Auto mode. Timers: H - Hello timer is running. S - Switching timer is running. C - Device is in Consistent state. Q - Quit timer is running. I - Interface timer is running. Channel group 1 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-385 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 412
show pagp Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Port Gi0/21 Gi0/22 Flags State SC U6/S7 SC U6/S7 Related Commands Command clear pagp Description Clears PAgP channel-group information. 2-386 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 413
or the description of a specific interface. (Optional) Display the switch platform and the software image running on the switch: Switch# show desktop Macro type : default interface # macro keywords $AVID # Basic interface - Enable data VLAN only OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 414
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands # Recommended value for access vlan (AVID) should not be 1 switchport access vlan $AVID switchport mode access Macro name : cisco-phone Macro type : default interface # Cisco IP phone + desktop template # macro - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 415
command: Switch# show parser macro brief default global : cisco-global default interface: cisco-desktop default interface: cisco-phone default interface: cisco-switch default > Configuration File Management Commands. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-389 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 416
Catalyst Blade Switch 3020 for HP Cisco IOS Commands show policy-map Use the show policy-map user EXEC command to display quality of service (QoS command-line help string, the control-plane and interface keywords are not supported, and the statistics shown in the display should be ignored. Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 417
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show policy-map Related Commands Command policy-map Description Creates or modifies a policy map that can be attached to multiple ports to specify a service policy. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 418
Blade Switch 3020 for HP Cisco IOS Commands show port-security Use the show port-security privileged EXEC command to display port-security settings for an interface or for the switch the configured maximum and the current number of secure MAC addresses for all VLANs on the interface. This option - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 419
command: Switch# show port-security interface gigabitethernet0/2 vlan Default maximum:not set, using 5120 VLAN Maximum Current 5 default 1 10 default 54 11 default 101 12 default 101 13 default 201 14 default 501 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 420
-security Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command clear port-security switchport port-security Description Deletes from the MAC address table a specific type of secure address or all the secure addresses on the switch or an interface. Enables - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 421
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show setup express show setup express Use the show setup express privileged EXEC command to display if Express Setup mode is active on the switch. show setup express [ | {begin | exclude | include} expression] Syntax Description - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 422
privileged EXEC mode). Enter each interface separated by a space. Ranges are not supported. Valid interfaces include physical ports, VLANs, and port channels. The VLAN range is 1 to 4094. The port-channel range is 1 to 48. 2-396 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 423
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show spanning-tree OL-8916-01 mst [configuration current MST configuration identifier (MSTCI). Two separate digests, one for standard and one for prestandard switches, appear (available only in privileged EXEC mode). The - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 424
show spanning-tree Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands | begin | exclude | include expression (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. ( - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 425
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show spanning-tree Port 1 (GigabitEthernet0/21) of VLAN0001 is forwarding Port sent (all VLANs) : 0 Number of RLQ response PDUs sent (all VLANs) : 0 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-399 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 426
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands This is an example of output from the show spanning-tree mst configuration command: Switch# show spanning-tree mst configuration Name [region1] Revision 1 Instance Vlans Mapped 0 1-9,21-4094 1 10-20 This is an - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 427
Fast feature on an interface and all its associated VLANs. Accelerates the choice of a new root port when a link or switch fails or when the spanning tree reconfigures itself. Configures spanning tree on a per-VLAN basis. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-401 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 428
settings appear for one traffic type for all ports on the switch. If you Switch> show storm-control Interface Filter State Upper Lower Current Gi0/1 Forwarding 20 pps 10 pps 5 pps Gi0/2 Forwarding 50.00% 40.00% 0.00% 2-402 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 429
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show storm-control This is an example of output from the show storm-control command for a specified interface. Because no traffic-type keyword was entered, the broadcast storm control settings appear. Switch> show storm-control - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 430
Blade Switch 3020 for HP Cisco IOS Commands show system mtu Use the show system mtu privileged EXEC command to display the global maximum transmission unit (MTU) or maximum packet size set for the switch until you reset the switch. The system MTU refers to ports operating at 10/100 Mbps; the system - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 431
1 Expiration time: 146 Device ID: 1 Current neighbor state: Bidirectional Device name: Switch-A Port ID: Gi0/21 Neighbor echo 1 device: Switch-B Neighbor echo 1 port: Gi0/22 Message interval: 5 CDP Device name: Switch-A OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-405 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 432
, in seconds, that UDLD waits for echoes from a neighbor device during the detection window. Information from the first cache entry, which contains a copy of echo information received or is set to the default (Switch). 2-406 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 433
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show udld Related Commands Command udld udld port udld reset Description Enables by UDLD and permits traffic to begin passing through them again. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-407 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 434
show version Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show version Use the show version user EXEC command to display version information for the hardware and firmware. show version [ | {begin | exclude | include} expression] Syntax Description | begin | exclude | - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 435
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show version 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : 00:D0:2B:FC:4D:00 Motherboard assembly number : 73-10340-04 Motherboard serial number : FHH0939004D Model revision - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 436
visible in the command-line help string, the ifindex, internal usage, and private-vlan keywords are not supported. Command Modes User EXEC Command History Release 12.2(25)SEF Modification This command was introduced. 2-410 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 437
Gi0/1, Gi0/2, Gi0/3, Gi0/4 Gi0/5, Gi0/6, Gi0/7, Gi0/8 Gi0/9, Gi0/10, Gi0/12 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-411 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 438
show vlan Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands 101 enet 100101 1500 - - - - - 0 0 102 enet 100102 1500 - - - - - 0 0 103 enet 100103 1500 - - - - - 0 VLAN, if one exists. 2-412 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 439
/10, Gi0/11, Gi0/12 Gi0/13, Gi0/14, Gi0/15, Gi0/16 Gi0/17, Gi0/18 VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 1 enet 100001 1500 - - - - - 0 0 Remote SPAN VLAN Disabled Primary Secondary Type Ports OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 440
show vlan Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command switchport mode vlan (global configuration) vlan (VLAN configuration) Description Configures the VLAN membership mode of a port. Enables VLAN configuration - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 441
| exclude | include expression (Optional) Name of a specific VLAN access map. (Optional) Display begins with the line map command: Switch# show vlan access-map Vlan access-map "SecWiz" 10 Match clauses: one or more VLANs. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-415 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 442
show vlan filter Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show vlan filter Use the show vlan filter Creates a VLAN map entry for VLAN packet filtering. Applies a VLAN map to one or more VLANs. 2-416 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 443
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show vmps show vmps Use the show that contain Output appear. Examples This is an example of output from the show vmps command: Switch> show vmps VQP Client Status VMPS VQP Version: 1 Reconfirm Interval: 60 min Server Retry - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 444
the VMPS changed from one server to another. problem. If the retry limit has not yet been reached, the client repeats the request with the same server or with the next alternate server, depending on whether the per-server retry count has been reached. 2-418 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 445
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show vmps Related Commands Command clear vmps statistics vmps reconfirm (privileged EXEC Configures the primary VMPS and up to three secondary servers. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-419 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 446
show vtp Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show vtp Use the show vtp user EXEC command to display advts received from non-pruning-capable device Gi0/21 0 0 0 Gi0/22 0 0 0 2-420 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 447
. To solve this problem, make sure the VTP password on all switches is the same. These errors mean that the switch is filtering incoming advertisements, which causes the VTP database to become unsynchronized across the network. Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-421 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 448
version operating on the switch. By default, the switch implements Version 1 but can be set to Version 2. Current configuration revision number on this switch. Maximum number of VLANs supported locally. Number of existing VLANs. 2-422 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 449
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show vtp Table 2-31 show vtp status Field Descriptions (continued) Field VTP Operating Mode Description Displays the VTP operating mode, which can be server, client, or transparent. Server: a switch in VTP server mode is - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 450
show vtp Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command clear vtp counters vtp (global configuration) vtp mode. Configures the VTP domain name, password, pruning, and mode. 2-424 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 451
2V] Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands shutdown shutdown Use the shutdown interface Description Displays the statistical information specific to all interfaces or to a specific interface. OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-423 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 452
shutdown vlan Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands shutdown vlan Use the shutdown vlan global configuration command to vlan-id global configuration command). Enters VLAN configuration mode. 2-424 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 453
Blade Switch 3020 for HP Cisco IOS Commands snmp-server enable traps snmp-server enable traps Use the snmp-server enable traps global configuration command to enable the switch temperature] | flash | hsrp | ipmulticast | mac-notification | msdp | ospf [cisco-specific | errors | lsa | rate-limit | - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 454
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ospf [cisco-specific | errors | lsa | rate-limit | retransmit | state-change] (Optional) Enable Open Shortest Path First (OSPF) traps. The keywords have these meanings: • cisco-specific-(Optional) Enable Cisco-specific traps. • errors - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 455
Blade Switch 3020 for HP Cisco IOS Commands snmp-server enable traps Note Though visible in the command-line help strings, the cpu [threshold], cluster, hsrp, msdp, ospf, pim, fru-ctrl, insertion, and removal keywords are not supported are not supported in SNMPv1. To enable more than one type of - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 456
Blade Switch 3020 for HP the SNMP used to send the traps. These keywords are supported: 1-SNMPv1. This option is not available with informs. software image is installed. (Optional) Virtual private network (VPN) routing instance and name for this host. 2-428 Cisco Catalyst Blade Switch for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 457
Blade Switch 3020 for HP all notifications are sent. The notification type can be one or more of the these keywords: • bridge-Send multicast routing traps. • mac-notification-Send SNMP MAC notification traps. • msdp- supported. OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-429 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 458
snmp-server host Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Defaults This command is SNMP notifications are sent globally. For a host to receive most notifications, at least one snmp-server enable traps command and the snmp-server host command for that host must - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 459
Blade Switch 3020 for HP Cisco IOS Commands snmp-server host Examples This example shows how to configure a unique SNMP community string named comaccess for traps and prevent SNMP polling access with this string through access-list 10: Switch(config)# snmp-server community comaccess ro 10 Switch - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 460
notification Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands snmp trap mac-notification Use the snmp trap mac-notification interface configuration command to enable the Simple Network Management Protocol (SNMP) MAC address notification trap on a specific Layer 2 interface. Use - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 461
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands snmp trap mac-notification Related Commands Command clear mac address-table notification mac address-table notification show mac address-table notification snmp-server enable traps Description Clears the MAC address notification global - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 462
spanning-tree backbonefast Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree backbonefast Use state. For more information, see the software configuration guide for this release. Enable BackboneFast on all supported switches to allow the detection of indirect link - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 463
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree bpdufilter spanning-tree This command was introduced. Usage Guidelines You can enable the BPDU filtering feature when the switch is operating in the per-VLAN spanning-tree plus (PVST+), rapid-PVST+, or the - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 464
spanning-tree bpdufilter Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show running-config spanning-tree portfast (global configuration) spanning-tree portfast (interface configuration) Description Displays the current operating configuration. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 465
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree bpduguard spanning-tree secure response to invalid configurations because you must manually put the interface back in service. Use the BPDU guard feature in a service-provider network to prevent an interface from - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 466
spanning-tree bpduguard Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show running-config spanning-tree portfast (global configuration) spanning-tree portfast (interface configuration) Description Displays the current operating configuration. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 467
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree cost spanning-tree cost are the IEEE default path cost values: • 1000 Mbps-4 • 100 Mbps-19 • 10 Mbps-100 Command Modes Interface configuration Command History Release 12.2(25)SEF Modification This command was - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 468
spanning-tree cost Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show spanning-tree interface interface-id spanning-tree port-priority spanning-tree vlan priority Description Displays spanning-tree information - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 469
Blade Switch 3020 for HP Cisco IOS Commands spanning-tree etherchannel guard misconfig spanning-tree etherchannel guard misconfig Use the spanning-tree etherchannel guard misconfig global configuration command to display an error message when the switch command, or you can manually re-enable it by - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 470
etherchannel guard misconfig Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command errdisable as a one-line summary per channel-group. Displays the interfaces in the error-disabled state. 2-442 Cisco Catalyst Blade Switch for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 471
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning- MAC address to make the bridge ID unique for each VLAN or multiple spanning-tree instance. Support for the extended system ID affects how you manually configure the root switch, the secondary root switch, and the switch - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 472
spanning-tree extend system-id Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show spanning-tree summary spanning-tree mst root spanning-tree vlan priority Description Displays a summary of spanning-tree interface - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 473
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree guard spanning-tree guard Use the spanning-tree guard interface configuration command to enable root guard or loop guard on - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 474
spanning-tree guard Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands ports. When the switch is operating in MST mode, BPDUs are not sent on nonboundary interfaces if the interface is blocked by loop guard in all MST instances. On a - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 475
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree link-type is point-to-point. shared Specify that the link type of an interface is shared. Defaults The switch derives the link type of an interface from the duplex mode. A full-duplex interface is considered a - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 476
spanning-tree link-type Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command clear spanning-tree detected-protocols show spanning-tree interface interface-id show spanning-tree mst interface interface-id Description - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 477
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree loopguard default tree does not send bridge protocol data units (BPDUs) on root or alternate ports. When the switch is operating in MST mode, BPDUs are not sent on nonboundary interfaces if the interface is blocked - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 478
spanning-tree loopguard default Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show running-config spanning-tree guard loop Description Displays the current operating configuration. For syntax information, select Cisco IOS - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 479
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mode spanning-tree mode Use the spanning-tree mode global configuration command to enable per-VLAN spanning-tree plus (PVST+), rapid PVST+, or multiple spanning tree (MST) on your switch. Use the no form of this - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 480
spanning-tree mode Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show running-config Description Displays the current operating configuration. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 481
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst configuration show [current | pending]: displays the current or pending MST region configuration. In MST mode, the switch supports up to 65 MST instances. The number of VLANs that can be mapped to a particular MST - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 482
-tree mst configuration Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands When you map VLANs Vlans Mapped 0 1-9,21-4094 1 10-20 Switch(config-mst)# exit Switch(config)# This example shows how to add VLANs 1 to 100 to the ones already mapped (if any) to instance - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 483
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst cost spanning-tree the IEEE default path cost values: • 1000 Mbps-20000 • 100 Mbps-200000 • 10 Mbps-2000000 Command Modes Interface configuration Command History Release 12.2(25)SEF Modification This command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 484
spanning-tree mst cost Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show spanning-tree mst interface interface-id spanning-tree mst port-priority spanning-tree mst priority Description Displays MST - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 485
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst forward-time spanning-tree mst forward-time Use the spanning-tree mst forward-time global configuration command to set - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 486
Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst hello-time Use the spanning-tree mst hello-time global configuration command to set the interval between hello bridge protocol data units (BPDUs) sent by root switch by root switch configuration messages. The range is 1 to 10 seconds. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 487
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst max-age spanning-tree mst max-age Use the spanning-tree mst max-age global configuration command to set the interval between messages that the spanning tree receives from the root switch. If a switch does not receive - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 488
mst max-hops Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst max- a switch receives this BPDU, it decrements the received remaining hop count by one and propagates the decremented count as the remaining hop count in the generated M-records. A switch discards - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 489
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst max-hops Related Commands Command show spanning-tree mst spanning-tree mst forward-time spanning-tree mst hello-time - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 490
spanning-tree mst port-priority Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst port-priority Use the spanning-tree mst port-priority interface configuration command to configure an interface priority. If a loop - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 491
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst port-priority Related Commands Command show spanning-tree mst interface interface-id spanning-tree mst cost spanning-tree mst - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 492
tree mst pre-standard Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst pre- tree (CIST) runs on this interface. Note If a switch port is connected to a switch running prestandard Cisco IOS software, you must use the spanning-tree mst pre-standard interface - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 493
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst priority spanning-tree mst priority Use the spanning-tree mst priority global configuration command to set the switch priority for the specified spanning-tree instance. Use the no form of this command to return - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 494
spanning-tree mst root Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst root Use the spanning-tree mst root global configuration command to configure the multiple spanning-tree (MST) root switch priority and timers based on the network diameter. Use the no - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 495
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree mst root When you enter the spanning-tree mst instance-id root secondary command, because of support for the extended system ID, the software changes the switch priority from the default value (32768) to 28672. If - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 496
spanning-tree port-priority Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree port-priority Use the spanning-tree port-priority interface configuration command to configure an interface priority. If a loop occurs, spanning - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 497
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree port-priority Related Commands Command show spanning-tree interface interface-id spanning-tree cost spanning-tree vlan priority Description Displays - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 498
spanning-tree portfast (global configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree portfast (global configuration) Use the spanning-tree portfast global configuration command to globally enable bridge protocol data unit (BPDU) filtering - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 499
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree portfast (global secure response to invalid configurations because you must manually put the interface back in service. Use the BPDU guard feature in a service-provider network to prevent an access port from - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 500
(interface configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree portfast (interface command. The spanning-tree portfast command is not supported on trunk ports. You can enable this feature when the switch is operating in the per-VLAN spanning-tree plus - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 501
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree portfast (interface configuration) Examples This example shows how to enable the Port Fast feature on a port: Switch(config)# interface gigabitethernet0/2 Switch(config-if)# spanning-tree portfast You can verify - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 502
spanning-tree transmit hold-count Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree transmit hold-count Use the spanning-tree transmit hold-count global configuration command to configure the number of bridge protocol - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 503
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree uplinkfast spanning-tree uplinkfast Use the spanning-tree uplinkfast global configuration command to accelerate the choice of a new root port when a link or switch fails or when the spanning tree reconfigures itself - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 504
spanning-tree uplinkfast Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Do not enable the root guard on interfaces that will be used by the UplinkFast feature. With UplinkFast, the backup interfaces (in - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 505
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree vlan spanning- between hello bridge protocol data units (BPDUs) sent by the root switch configuration messages. The range is 1 to 10 seconds. (Optional) Set the interval between messages the spanning tree receives - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 506
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Command software checks the switch priority of the current root switch for each VLAN. Because of the extended system ID support, the switch sets the switch priority for the specified VLAN to 24576 if this value will cause this switch - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 507
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree vlan This example shows how to set spanning-tree max-age to 30 seconds for VLAN 20: Switch(config)# spanning-tree vlan 20 max-age 30 This example shows how to reset the max-age parameter to the default value for - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 508
support autonegotiation, we highly recommend the default autonegotiation settings. If one interface supports switch speed and duplex parameters, see the "Configuring Interface Characteristics" chapter in the software configuration guide for this release. 2-480 Cisco Catalyst Blade Switch for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 509
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands speed Examples This example shows how to set the speed on a port to 100 Mbps: Switch(config)# interface gigabitethernet0/21 Switch(config-if)# speed 100 This example shows how to set a port to autonegotiate at only 10 Mbps: Switch(config - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 510
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands to which the port should be limited. The range is 10 to 90. Defaults The port is not rate limited and service (QoS) solution. Examples This example shows how to limit a port to 800 Mbps: Switch(config)# interface gigabitethernet0/1 Switch - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 511
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands srr-queue bandwidth limit Related to the queue-set. Maps class of service (CoS) values to egress queue or maps CoS values to a queue and to a threshold ID. Maps Differentiated Services Code Point (DSCP) values to an egress - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 512
srr-queue bandwidth shape Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands srr-queue bandwidth shape Use the srr-queue bandwidth shape interface queues and if these settings do not meet your QoS solution. 2-484 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 513
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands srr-queue bandwidth shape the egress expedite queue on a port. Maps a port to a queue-set. Displays quality of service (QoS) information. Assigns the shared weights and enables bandwidth sharing on the four egress queues mapped - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 514
srr-queue bandwidth share Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands srr-queue bandwidth share Use the srr-queue bandwidth share interface configuration command switch to assign the shared weights and to enable bandwidth sharing on the four egress queues mapped to a port. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 515
Blade Switch 3020 for HP 2/(1+2+3+4), 3/(1+2+3+4), and 4/(1+2+3+4), which is 10 percent, 20 percent, 30 percent, one-and-a-third times the bandwidth of queue 3. Switch(config)# interface gigabitethernet0/1 Switch a queue-set. Displays quality of service (QoS) information. Assigns the shaped - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 516
storm-control Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands storm-control Use the storm-control interface configuration command to use metric suffixes such as k, m, and g for large number thresholds. 2-488 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 517
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands storm-control level pps pps [pps-low] action { This command was introduced. Usage Guidelines Storm control is supported only on physical interfaces. It is not supported on EtherChannel port channels, even though it is available - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 518
storm-control Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands If you configure the action to the action is to filter traffic, the switch blocks only broadcast traffic. For more information, see the software configuration guide for this release. Examples This example shows - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 519
Blade Switch 3020 for HP source MAC address of a host (or hosts) connected to the port. The switch sends every new MAC address one VLAN. The VMPS server (such as a Catalyst 6000 series switch) must be configured before a port is configured as dynamic. OL-8916-01 Cisco Catalyst Blade Switch for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 520
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands These restrictions apply to dynamic-access ports: • The software implements the VLAN Query Protocol (VQP) client, which can query a VMPS such as a Catalyst 6000 series switch. The Cisco Catalyst Blade Switches are not VMPS servers - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 521
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands switchport backup interface switchport backup be a physical interface or port channel. The port-channel range is 1 to 48. Configure the MAC move update (MMU) for a backup interface pair. The VLAN ID of the private-VLAN primary - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 522
switchport backup interface Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Usage Guidelines With Flex Links configured, one link acts as the primary interface and forwards traffic, while the other interface is in standby mode, ready to begin forwarding traffic if the primary - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 523
Blade Switch 3020 for HP Cisco IOS Commands switchport backup interface Related Commands Command show interfaces [interface-id] switchport backup Description Displays the configured Flex Links and their status on the switch or for the specified interface. OL-8916-01 Cisco Catalyst Blade Switch - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 524
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Usage Guidelines By default, all traffic with unknown MAC addresses is sent to all ports. You can software configuration guide for this release. Examples This example shows how to block unknown multicast traffic on an interface: Switch - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 525
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands switchport host switchport host Use the switchport host interface configuration command to optimize a port for a host connection. The no form of this - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 526
switchport mode Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands switchport mode Use the the switchport mode command. The static-access and trunk configuration are saved, but only one configuration is active at a time. When you enter access mode, the interface changes - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 527
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands switchport mode To autonegotiate trunking, the cause misconfigurations. To avoid this, you should configure interfaces connected to devices that do not support DTP to not forward DTP frames, which turns off DTP. • If you do not - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 528
. • To enable trunking on a device that does not support DTP, use the switchport mode trunk and switchport nonegotiate interface configuration commands to cause the interface to become a trunk but to not generate DTP frames. 2-500 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 529
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands switchport nonegotiate Examples This example shows how to cause a port to refrain from negotiating trunking mode and to act as a trunk or access port (depending on the mode set): Switch(config)# interface gigabitethernet0/21 Switch(config - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 530
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands switchport port-security Use the switchport port-security interface configuration command without keywords to enable port security on the interface. Use the keywords to configure secure MAC addresses, sticky MAC address learning - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 531
Blade Switch 3020 for HP Cisco IOS Commands switchport port-security vlan [vlan-list] violation protect restrict shutdown (Optional) For trunk ports, you can set the maximum number of secure MAC -violation global configuration command, or you can manually re-enable it by entering the shutdown and - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 532
security Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Command MAC addresses are required. If you connect more than one PC to the Cisco IP phone, you must configure enough secure addresses to allow one for each PC and one for the Cisco IP phone. • Voice VLAN is supported - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 533
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands switchport port-security Examples Sticky secure MAC addresses have these characteristics: • When you enable sticky learning on an interface by using the switchport port-security mac-address sticky interface configuration command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 534
switchport port-security Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command clear port-security show port-security address show port-security interface interface-id Description Deletes from the MAC address table a specific type of secure address or all - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 535
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands switchport port-security aging switchport port-security aging Use the switchport no switchport port-security aging static interface configuration command. OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-507 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 536
Blade Switch 3020 for HP Cisco IOS Commands Examples This example sets the aging time as 2 hours for absolute aging for all the secure addresses on the port: Switch(config)# interface gigabitethernet0/1 Switch MAC addresses. 2-508 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 537
Catalyst Blade Switch 3020 for HP Cisco received from the PC or the attached device with the specified class of service (CoS) value. The range is 0 to 7. Seven is the highest enabled, you can configure the switch to send the Cisco Discovery Protocol (CDP) packets to instruct the IP phone how to send - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 538
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Related Commands Command show interfaces switchport voice vlan Description Displays the administrative and operational status of a switching port. Configures the voice VLAN on the port. 2-510 Cisco Catalyst Blade Switch for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 539
Blade Switch 3020 for HP Cisco IOS Commands switchport protected switchport protected Use the switchport protected interface configuration command to isolate unicast, multicast, and broadcast traffic at Layer 2 from other protected ports on the same switch and forwarded in software. All data - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 540
Blade Switch 3020 for HP switch supports simultaneous tagged and untagged traffic on a port. Set the encapsulation format on the trunk port to Inter-Switch Link (ISL). The switch on commands that require certain VLANs to be set or at least one VLAN to be set. • add adds the defined list of VLANs - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 541
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands switchport trunk Separate nonconsecutive VLAN IDs with a comma; use a hyphen to designate a range of IDs. • except lists the VLANs that should be calculated by inverting the defined list of VLANs. (VLANs are added except the ones specified - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 542
switchport trunk Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Trunk pruning: • The pruning-eligible VLANs 3 and 10 to 15 from the pruning-eligible list: Switch(config)# interface gigabitethernet0/22 Switch(config-if)# switchport trunk pruning vlan remove 3,10-15 You can - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 543
Blade Switch 3020 for HP voice traffic with an IEEE 802.1p priority of 5. Do not instruct the IP telephone about the voice VLAN. The telephone uses the voice VLAN, we recommend that you enable quality of service (QoS) on the switch by entering the mls qos global configuration command and - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 544
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands When you enable port security on an interface that is also configured with a voice VLAN, set the maximum allowed secure addresses on the port to two. When the port is connected to a Cisco IP phone, the IP phone requires one MAC address. The - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 545
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands system mtu system mtu 10/100-Mbps ports are not affected by the system mtu jumbo command. If you enter a value that is outside the range for the specific type of switch, the value is not accepted. Note The switch does not support - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 546
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to set the maximum jumbo packet size for Gigabit Ethernet ports operating at 1000 Mbps or greater to 1800 bytes: Switch(config)# system mtu jumbo 1800 Switch(config)# exit Switch# reload You can - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 547
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands test cable-diagnostics tdr Guidelines TDR is supported only on 10/100/1000 copper Ethernet ports. It is not supported on SFP module ports. For more information about TDR, see the software configuration guide for this release. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 548
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands traceroute mac Use the traceroute mac privileged EXEC command to display the Layer 2 path taken by the packets from the specified source MAC address to the specified destination MAC address. traceroute mac [interface interface-id - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 549
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands traceroute mac Examples OL-8916-01 This example shows how to display the Layer 2 path by specifying the source and destination MAC addresses: Switch# traceroute mac 0000.0201.0601 0000.0201.0201 Source 0000.0201.0601 found on - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 550
traceroute mac Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Error:Source and destination macs are on different vlans. Layer2 trace aborted. This example shows the Layer 2 path when the destination MAC address is a multicast address: Switch# traceroute mac 0000.0201.0601 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 551
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands traceroute mac ip traceroute mac ip Use the traceroute mac ip privileged the switches in the network. Do not disable CDP. When the switch detects an device in the Layer 2 path that does not support Layer 2 traceroute, the switch continues - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 552
traceroute mac ip Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands The Layer 2 traceroute feature is not supported when multiple devices are attached to one port through hubs (for example, multiple CDP neighbors are detected on a port). When more than one CDP neighbor is - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 553
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands trust trust Use the trust ) Classify an ingress packet by using the packet IP-precedence value (most significant 3 bits of 8-bit service-type field). For a non-IP packet, the packet CoS value is used if the packet is tagged - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 554
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands trust If you specify trust ip to specify a service policy. Classifies IP traffic by setting a DSCP or IP-precedence value in the packet. Displays QoS policy maps. 2-526 Cisco Catalyst Blade Switch for HP Command Reference OL- - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 555
Blade Switch 3020 for HP Guidelines UDLD supports two modes of one-way traffic on fiber-optic and twisted-pair links and due to misconnected interfaces on fiber-optic links. For information about normal and aggressive modes, see the "Understanding UDLD" section in the software configuration guide - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 556
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands udld • The no udld port interface configuration command followed by the udld port all interfaces shut down by UDLD and permits traffic to again pass through. 2-528 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 557
Blade Switch 3020 for HP of another switch. UDLD supports two modes one-way traffic on fiber-optic and twisted-pair links and due to misconnected interfaces on fiber-optic links. For information about normal and aggressive modes, see the "Configuring UDLD" chapter in the software configuration guide - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 558
udld port Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands You can use these commands to reset an interface shut down by UDLD: • all interfaces shut down by UDLD and permits traffic to again pass through. 2-530 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 559
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands udld reset udld reset Use and are disabled for the same reason if the problem has not been corrected. Examples This example shows how to reset all interfaces disabled by UDLD: Switch# udld reset 1 ports shutdown by UDLD were - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 560
(global configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vlan (global configuration) you must use the vtp transparent global configuration or VLAN configuration command to put the switch in VTP transparent mode. Extended-range VLANs are not learned by VTP and are - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 561
Blade Switch 3020 for HP The type keyword applies only to TrCRF VLANs and is one of these: - srb (source-route bridging) - switch supports only Ethernet ports. You configure only FDDI and Token Ring media-specific characteristics for VLAN Trunking Protocol (VTP) global advertisements to other switches - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 562
(global configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands • name vlan-name • said said-value: specifies the security association identifier (SAID) as documented in IEEE 802.10. The range is 1 to 4294967294, and the number must be unique within the administrative - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 563
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vlan (global configuration) Table this field blank. Specify unique ring numbers when TrCRF VLANs have the same parent VLAN ID. Only one backup concentrator relay function (CRF) can be enabled. VTP v2 mode is enabled, and you Do - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 564
vlan (global configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Table 2-33 VLAN Configuration a configuration points to must also contain a pointer to the original VLAN in one of the translational bridging parameters (for example, Ethernet points to FDDI, and FDDI - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 565
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vlan (VLAN configuration) vlan (VLAN configuration switch supports only Ethernet ports. You configure only FDDI and Token Ring media-specific characteristics for VLAN Trunking Protocol (VTP) global advertisements to other switches - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 566
(VLAN configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands media {ethernet | to 4095. (Optional) Enter the security association identifier (SAID) as documented in IEEE 802.10. The range is 1 to 4294967294, and the number must be unique within the administrative domain - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 567
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vlan (VLAN configuration) OL-8916 this field blank. Specify unique ring numbers when TrCRF VLANs have the same parent VLAN ID. Only one backup concentrator relay function (CRF) can be enabled. VTP v2 mode is enabled, and you Do - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 568
vlan (VLAN configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Table 2-35 VLAN Configuration Rules a configuration points to must also contain a pointer to the original VLAN in one of the translational bridging parameters (for example, Ethernet points to FDDI, and - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 569
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vlan (VLAN configuration) Command History Release 12.2(25)SEF Modification This command was SAID returns to the default (100,000 plus the VLAN ID). OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-541 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 570
VLAN configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands • When the one VLAN (if the VLAN ID or name is specified) in the administrative domain. Enters config-vlan mode for configuring normal-range and extended-range VLANs. 2-542 Cisco Catalyst Blade Switch for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 571
Blade Switch 3020 for HP Cisco IOS Commands vlan access-map vlan access-map Use the vlan access-map global configuration command on the switch in increments of 10, starting from 10. This number is values to match (IP address or MAC address). • no: negates a command can be only one VLAN map per - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 572
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands In global configuration mode, use the vlan filter interface configuration command to apply the map to one or more VLANs. For more information about VLAN map entries, see the software configuration guide for this release. Examples - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 573
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vlan database vlan database Use the vlan database privileged EXEC command functions. For more information, see the vtp (VLAN configuration) command. OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-545 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 574
vlan database Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples When you have modified VLAN or to display VLAN database information: Switch# vlan database Switch(vlan)# show VLAN ISL Id: 1 Name: default Media Type: Ethernet VLAN 802.10 Id: 100001 State: Operational MTU - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 575
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vlan database VLAN ISL Id: 1002 Name: fddi-default Media Type: FDDI VLAN 802.10 Id: 101002 State: Operational MTU: 1500 Bridge Type: SRB Ring Number: 0 Translational Bridged VLAN: 1 Translational Bridged VLAN: 1003 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 576
Catalyst Blade Switch 3020 for HP Cisco IOS Commands vlan filter Use the vlan filter global configuration command on the switch to apply a VLAN map to one see the software configuration guide for this release. Examples This example applies VLAN map entry map1 to VLANs 20 and 30: Switch(config)# - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 577
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vlan filter Related Commands Command show vlan access-map show vlan filter vlan access VLAN access map. Creates a VLAN map entry for VLAN packet filtering. OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-549 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 578
vmps reconfirm (privileged EXEC) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vmps reconfirm (privileged EXEC) Use the vmps reconfirm privileged EXEC command to immediately send VLAN Query Protocol (VQP) queries to reconfirm all - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 579
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vmps reconfirm (global configuration) vmps reconfirm (global configuration) Use the vmps queries to reconfirm all dynamic VLAN assignments with the VMPS. OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-551 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 580
vmps retry Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vmps retry Use the vmps retry the client before querying the next server in the list. The range is 1 to 10. Defaults The default retry count is 3. Command Modes Global configuration Command History Release 12.2( - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 581
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands 10.49.21: Switch(config)# no vmps server 191.10.49.21 You can verify your setting by entering the show vmps privileged EXEC command and examining information in the VMPS Domain Server row. OL-8916-01 Cisco Catalyst Blade Switch for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 582
vmps server Related Commands Command show vmps Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Description Displays VQP and VMPS information. 2-554 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 583
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vtp (global configuration) vtp (global configurations on other devices in the network. The switch receives VTP advertisements and forwards them on all trunk ports except the one on which the advertisement was received. When VTP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 584
configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Defaults The software. • Domain names are case-sensitive. • After you configure a domain name, it cannot be removed. You can only reassign it to a different domain. 2-556 Cisco Catalyst Blade Switch for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 585
be pruned. • Pruning is supported with VTP Version 1 and one switch; the version number is then propagated to the other Version-2 capable switches in the VTP domain. • If you are using VTP in a Token Ring environment, VTP Version 2 must be enabled. OL-8916-01 Cisco Catalyst Blade Switch for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 586
vtp (global configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands • If you are configuring a status vtp (VLAN configuration) Description Displays the VTP statistics for the switch and general information about the VTP management domain status. Configures VTP domain - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 587
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vtp (VLAN configuration) vtp (VLAN configurations on other devices in the network. The switch receives VTP advertisements and forwards them on all trunk ports except the one on which the advertisement was received. Defaults - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 588
vtp (VLAN configuration) Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Command Modes VLAN configuration Command History Release 12.2(25)SEF mode is saved in the VLAN database when applied. 2-560 Cisco Catalyst Blade Switch for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 589
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vtp (VLAN configuration) Follow these guidelines when configuring a VTP domain name: • The switch is in the no-management-domain state until you configure a domain name. While in the no-management-domain state, the switch does not send - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 590
2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to place the switch in VTP transparent mode: Switch(vlan)# vtp transparent Setting device to VTP TRANSPARENT mode. This example shows how to set the administrative domain for the switch: Switch(vlan)# vtp - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 591
to protect access to the switch password by disabling part of this functionality and allowing the Blade Switch 3020 for HP Software Configuration Guide for this release. You can access the boot loader through a switch console connection at 9600 bps. Remove and then reinstall the switch in the blade - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 592
are case sensitive. Examples This example shows how to boot the switch using the new-image.bin image: switch: boot flash:/new-images/new-image.bin After entering this command, you are prompted to start the setup program. Cisco Catalyst Blade Switch 3020 for HP Command Reference A-2 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 593
Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands boot Related Commands Command set Description Sets the BOOT environment variable to boot a specific image when the BOOT keyword is appended to the command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-3 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 594
|SSH|3DES|MIN_DRAM_MEG=128 image_family: CBS30x0 info_end: BAUD=57600 MANUAL_BOOT=no Related Commands Command more type Description Displays the contents of one or more files. Displays the contents of one or more files. Cisco Catalyst Blade Switch 3020 for HP Command Reference A-4 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 595
"flash:test4.text" You can verify that the file was copied by entering the dir filesystem: boot loader command. Related Commands Command delete Description Deletes one or more files from the specified file system. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-5 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 596
delete Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands delete Use the delete boot loader command to delete one or more files from the specified file system. delete a file from a source to a destination. Cisco Catalyst Blade Switch 3020 for HP Command Reference A-6 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 597
Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands dir dir Use the dir boot loader command to display a list of files can be any or all of the following: • d-directory • r-readable • w-writable • x-executable OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-7 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 598
dir Field Descriptions (continued) Description Size of the file. Last modification date. Filename. Related Commands Command mkdir rmdir Description Creates one or more directories. Removes one or more directories. Cisco Catalyst Blade Switch 3020 for HP Command Reference A-8 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 599
process, the flash file system is automatically initialized. Use this command to manually initialize the flash file system. For example, you use this command during the recovery procedure for a lost or forgotten password. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-9 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 600
format Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands format Use the format boot loader command to format the specified care; it destroys all data on the file system and renders your system unusable. A-10 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 601
an in-progress file system consistency check, disconnect the switch power and then reconnect the power. Examples This example shows how to perform an extensive file system check on flash memory: switch: fsck -test flash: OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-11 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 602
Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands help help Use the help boot loader command to display the available also use the question mark (?) to display a list of available boot loader commands. A-12 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 603
Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands load_helper load_helper Use the load_helper boot loader command to load and initialize one or more helper images, which directory names are case sensitive. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-13 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 604
the text storage area. Beginning and ending address of the read-only text storage area. This part of the data segment is grouped with the Text entry. Beginning and ending address of the allocated to and freed from. A-14 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 605
dir filesystem: boot loader command. Related Commands Command dir rmdir Description Displays a list of files and directories on the specified file system. Removes one or more directories from the specified file system. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-15 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 606
|SSH|3DES|MIN_DRAM_MEG=128 image_family: CBS30X0 info_end: BAUD=57600 MANUAL_BOOT=no Related Commands Command cat type Description Displays the contents of one or more files. Displays the contents of one or more files. A-16 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 607
Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands rename rename Use the rename boot loader command to rename a file. Commands Command copy Description Copies a file from a source to a destination. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-17 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 608
to reset the system: switch: reset Are you sure you want to reset the system (y/n)?y System resetting... Related Commands Command boot Description Loads and boots an executable image and enters the command-line interface. A-18 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 609
dir filesystem: boot loader command. Related Commands Command dir mkdir Description Displays a list of files and directories on the specified file system. Creates one or more new directories on the specified file system. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-19 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 610
Switch 3020 for HP Boot Loader Commands set set Use the set boot loader command to set or display environment variables, which can be used to control the boot loader or any other software running on the switch. set variable value Syntax Description variable value Use one manually boot the switch - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 611
environment variables. The MANUAL_BOOT environment variable can also be set by using the boot manual global configuration command. The BOOT environment variable can also be set by using the url global configuration command. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-21 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 612
boot loader prompt: switch: set PS1 loader: loader: You can verify your setting by using the set boot loader command. Related Commands Command unset Description Resets one or more environment variables to its previous setting. A-22 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 613
|SSH|3DES|MIN_DRAM_MEG=128 image_family: CBS0X0 info_end: BAUD=57600 MANUAL_BOOT=no Related Commands Command cat more Description Displays the contents of one or more files. Displays the contents of one or more files. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-23 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 614
Switch 3020 for HP Boot Loader Commands unset Use the unset boot loader command to reset one or more environment variables. unset variable ... Syntax Description variable Use one of these keywords for variable: MANUAL_BOOT-Decides whether the switch automatically or manually IOS software inherits - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 615
configuration command. Examples This example shows how to reset the prompt string to its previous setting: switch: unset PS1 switch: Related Commands Command set Description Sets or displays environment variables. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-25 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 616
. Examples This example shows how to display the boot loader version: switch: version CBS30X0 Boot Loader (CBS30X0-HBOOT-M) Version 12.2(25r)SEF1, RELEASE SOFTWARE (fc2) Compiled Wed 10-May-06 15:05 by myl switch: A-26 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 617
APPENDIX B Cisco Catalyst Blade Switch 3020 for HP Debug Commands This appendix describes the debug privileged EXEC commands that have been created or changed for use with the switch. These commands are helpful in diagnosing and resolving internetworking problems and should be enabled only under - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 618
debug auto qos Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug auto qos Use the debug auto qos privileged EXEC command to enable debugging of the automatic quality of service (auto-QoS) feature. Use the no form of this command to disable debugging. debug auto qos no debug - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 619
queue bandwidth shape 10 0 0 0 21:29:50: srr-queue bandwidth share 10 10 60 20 Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 620
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Cisco Catalyst Blade Switch 3020 for HP Command Reference B-4 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 621
not supported. Command Default Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines The undebug dot1x command is the same as the no debug dot1x command. OL-8916-01 Cisco Catalyst Blade Switch 3020 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 622
Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays IEEE 802.1xstatistics, administrative status, and operational status for the switch or for the specified port. Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 623
Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays DTP information for the switch or for a specified interface. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 624
debug eap Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug eap Use the debug eap privileged EXEC command to enable debugging of the The undebug dot1x command is the same as the no debug dot1x command. Cisco Catalyst Blade Switch 3020 for HP Command Reference B-8 OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 625
> Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays EAP registration and session information for the switch or for the specified port. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-9 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 626
Blade Switch 3020 for HP Debug Commands debug etherchannel Use the debug etherchannel privileged EXEC command to enable debugging of the EtherChannel/PAgP shim. This shim is the software is not supported. Defaults Debugging 10 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 627
Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays EtherChannel information for the channel. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 628
debug interface Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug interface Use the debug interface privileged EXEC command to enable interface command is the same as the no debug interface command. B-12 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 629
Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays EtherChannel information for the channel. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 630
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-14 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 631
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-15 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 632
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-16 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 633
12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays LACP channel-group information. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 634
IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays the MAC address notification information for all interfaces or the specified interface. B-18 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 635
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-19 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 636
IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. show mac address-table move update Displays the MAC address-table move update information on the switch. B-20 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 637
> Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays information about all SPAN and remote SPAN (RSPAN) sessions on the switch. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-21 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 638
Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays the current MVR configuration. B-22 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 639
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-23 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 640
Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays PAgP channel-group information. B-24 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 641
racl and stack keywords are not supported. Defaults Debugging is disabled. Command Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 642
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-26 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 643
Catalyst Blade Switch 3020 for HP Debug the remote console queue. Debug packets received by the software forwarding queue. Debug packets received by the Spanning Tree the routing-protocol-Q and rpffail-q keywords are not supported. Defaults Debugging is disabled. Command Modes Privileged EXEC - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 644
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-28 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 645
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-29 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 646
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-30 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 647
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-31 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 648
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-32 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 649
Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug platform ip igmp snooping debug platform ip igmp snooping Use the VLAN assert RPC debug messages. warn Display IGMP snooping warning messages. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-33 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 650
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-34 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 651
, the stack keyword is not supported. Defaults Debugging is disabled. Command Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 652
debug platform matm Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug platform matm Use the debug platform matm privileged EXEC command to enable debugging of platform-dependent MAC address management. Use the no form of this command to disable debugging. debug platform matm - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 653
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-37 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 654
strings, the stackchg keyword is not supported. Defaults Debugging is disabled. Command Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-38 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 655
Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug platform phy debug platform phy Use the debug platform phy privileged EXEC command to enable debugging of PHY driver information. Use the no form of this command to disable debugging. debug platform phy {automdix | cablediag | - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 656
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-40 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 657
Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug platform pm debug platform pm Use the debug platform pm privileged EXEC command to enable debugging of the platform-dependent port manager software module. Use the no form of this command to disable debugging. debug platform - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 658
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-42 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 659
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-43 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 660
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-44 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 661
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-45 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 662
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-46 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 663
error debug messages. Display the MAC address descriptor table and multi-expansion Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 664
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-48 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 665
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-49 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 666
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-50 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 667
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-51 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 668
debug platform tcam Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug platform tcam Use the messages. l3 {acl {input | output} | qos} • qos-Display classification and quality of service (QoS) look-up debug messages. Display Layer 3 field-based CAM look-up type debug messages - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 669
l3 secondary keywords are not supported. Defaults Debugging is disabled. Command Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 670
information about the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-54 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 671
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-55 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 672
the command-line help strings, the scp and pvlan keywords are not supported. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. B-56 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 673
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-57 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 674
and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays port-security settings for an interface or for the switch. B-58 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 675
information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-59 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 676
in the command-line help strings, the csuf/csrt keyword is not supported. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. B-60 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 677
12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays spanning-tree state information. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 678
Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays spanning-tree state information. B-62 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 679
12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays spanning-tree state information. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 680
Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays spanning-tree state information. B-64 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 681
Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug spanning-tree mstp debug spanning-tree mstp Use the debug spanning-tree mstp privileged EXEC command to enable debugging of the Multiple Spanning Tree Protocol (MSTP) software. Use the no form of this command to disable - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 682
Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays spanning-tree state information. B-66 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 683
Blade Switch 3020 for HP Debug Commands debug spanning-tree switch debug spanning-tree switch Use the debug spanning-tree switch privileged EXEC command to enable debugging of the software interface between the Spanning Tree Protocol (STP) software interrupt-Display interrupt service request (ISR) - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 684
Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays spanning-tree state information. B-68 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 685
12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays spanning-tree state information. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 686
debug sw-vlan Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug sw-vlan Use the debug sw-vlan privileged EXEC command to enable debugging sw-vlan command is the same as the no debug sw-vlan command. B-70 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 687
Troubleshooting and Fault Management. Displays the parameters for all configured VLANs or one VLAN (if the VLAN name or ID is specified) in the administrative domain. Displays general information about VTP management domain, status, and counters. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 688
debug sw-vlan ifs Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug sw-vlan ifs Use the debug sw-vlan ifs privileged reads type length version (TLV) descriptor structures. Operation 4 reads TLV data. B-72 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 689
Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays the parameters for all configured VLANs or one VLAN (if the VLAN name or ID is specified) in the administrative domain. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 690
debug sw-vlan notification Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug sw-vlan notification Use the debug sw-vlan notification privileged EXEC command to enable debugging of the activation and deactivation of Inter-Link Switch (ISL) VLAN IDs. Use the no form of this - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 691
Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays the parameters for all configured VLANs or one VLAN (if the VLAN name or ID is specified) in the administrative domain. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 692
debug sw-vlan vtp Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug sw-vlan vtp Use the debug sw-vlan vtp , VTP_PRUNING_LOG_ALERT, and VTP_PRUNING_LOG_WARNING macros in the VTP pruning code. B-76 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 693
References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays general information about VTP management domain, status, and counters. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-77 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 694
debug udld Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug udld Use the debug udld privileged EXEC command to enable debugging messages appear: • Sub-block creation • Fiber-port status changes B-78 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 695
Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug udld • State change indications from the port manager software • MAC address registry calls Related Commands Command show debugging show udld Description Displays information about the types of debugging that are enabled. - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 696
information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. B-80 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 697
been created or changed for use with the switch. These commands display information helpful in diagnosing and resolving internetworking problems and should be used only under the guidance of Cisco technical support staff. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference C-1 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 698
a problem. Do not use this command unless a technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 699
unless a technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference C-3 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 700
a problem. Do not use this command unless a technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Cisco Catalyst Blade Switch 3020 for HP - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 701
unless a technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference C-5 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 702
Blade Switch 3020 for HP Show Platform Commands show platform forward Use the show platform forward privileged EXEC command for an interface to specify how the hardware would forward a frame that matches the specified parameters. show platform forward interface-id [vlan vlan-id] src-mac dst-mac - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 703
directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you "Troubleshooting" chapter of the software configuration guide for this release. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 704
show platform ip igmp snooping Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands show platform ip igmp snooping Use the show platform ip igmp snooping privileged EXEC command to display platform-dependent Internet Group Management - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 705
Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands show platform ip igmp snooping Usage Guidelines You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 706
a problem. Do not use this command unless a technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. C-10 Cisco Catalyst Blade Switch 3020 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 707
Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands show platform mac-address-table show platform mac-address-table Use the show platform mac-address-table privileged EXEC command to display platform-dependent MAC address table information. show platform mac-address-table [ - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 708
a problem. Do not use this command unless a technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. C-12 Cisco Catalyst Blade Switch 3020 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 709
unless a technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference C-13 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 710
a problem. Do not use this command unless a technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. C-14 Cisco Catalyst Blade Switch 3020 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 711
unless your technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 712
port-asic Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands show platform port- [asic number | port number [asic number]] | learning [asic number | port number [asic number]] | mac-info [asic number | port number [asic number]] | mvid [asic number] | packet-info-ram [asic - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 713
Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands show platform port-asic exception [asic number | port number [asic number]] global-status [asic number | port number [asic number]] learning [asic number | port number [asic number]] mac-info [asic number | port number [asic - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 714
show platform port-asic Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands port-info [asic number | port number [asic number]] Display port information register values. The keywords have these meanings: • asic number-(Optional) Display - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 715
| mvid | prog-parser | span | stats [asic number | port number [asic number]] keywords are not supported. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference C-19 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 716
show platform port-asic Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands Usage Guidelines You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 717
unless your technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 718
Blade Switch 3020 for HP Show Platform Commands show platform qos Use the show platform qos privileged EXEC command to display platform-dependent quality of service technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 719
Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands show platform resource specified VLAN. The range is 1 to 4094. • mac-address mac-address [vlan vlan-id]-Display the MAC-address descriptor table for the specified MAC address represented by the 48-bit hardware address for all - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 720
problem. Do not use this command unless your technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. C-24 Cisco Catalyst Blade Switch 3020 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 721
unless your technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 722
problem. Do not use this command unless your technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. C-26 Cisco Catalyst Blade Switch 3020 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 723
unless your technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 724
Blade Switch 3020 for HP Show Platform Commands show platform tcam Use the show platform tcam privileged EXEC command to display platform-dependent ternary content addressable memory (TCAM) driver exclude | include} expression] show platform tcam table mac-address [asic number [detail [invalid]] | [ - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 725
unless your technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 726
problem. Do not use this command unless your technical support representative asks you to do so. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. C-30 Cisco Catalyst Blade Switch 3020 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 727
control lists See ACLs access groups IP 2-98 MAC, displaying 2-342 access map configuration mode 2- allowed VLANs 2-512 apply command 2-546 archive download-sw command 2-8 archive tar command 2-11 manually 2-25 boot loader accessing A-1 Cisco Catalyst Blade Switch 3020 for HP Command Reference IN-1 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 728
1-1 configuration, initial See getting started guide and hardware installation guide configuration files password recovery disable considerations A-1 specifying the name 2-21, 2-26 configuring multiple interfaces 2-95 IN-2 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 729
debug eap command B-8 debug etherchannel command B-10 debug interface command B-12 debug ip igmp command B-16 debug lacp command B-17 debug mac-notification command B-18 debug matm command B-19 -tree mstp command B-65 debug spanning-tree switch command B-67 debug spanning-tree uplinkfast command - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 730
68 dot1x host-mode command 2-70 dot1x initialize command 2-71 dot1x mac-auth-bypass command 2-72 dot1x max-reauth-req command 2-74 dot1x max-req command 2-75 dot1x pae command 2-76 IN-4 Cisco Catalyst Blade Switch 3020 for HP Command Reference dot1x port-control command 2-77 dot1x re-authenticate - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 731
creating port-channel logical interface 2-93 debug EtherChannel/PAgP, display B-10 debug platform-specific events, display B-30 displaying 2-308 interface information, displaying 2- , display B-14 IGMP groups, setting maximum 2-116 Cisco Catalyst Blade Switch 3020 for HP Command Reference IN-5 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 732
, display B-12 disabling 2-423 displaying the MAC address table 2-353 restarting 2-423 interface speed, configuring 2-480 interface vlan command 2-97 internal registers, displaying 2-280, 2-288 IN-6 Cisco Catalyst Blade Switch 3020 for HP Command Reference Internet Group Management Protocol See - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 733
-table aging-time command 2-153 mac address-table move update command 2-154 mac address-table notification command 2-156 mac address-table static command 2-158 mac address-table static drop command 2-159 macro apply command 2-161 Cisco Catalyst Blade Switch 3020 for HP Command Reference IN-7 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 734
range 2-49, 2-95 specifying parameter values 2-165 tracing 2-165 manual audience xv purpose of xv maps QoS defining 2-187 displaying 2-371 qos queue-set output threshold command 2-193 IN-8 Cisco Catalyst Blade Switch 3020 for HP Command Reference mls qos rewrite ip dscp command 2-195 mls qos - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 735
mechanism, enabling and disabling 2-254 permit (MAC access-list configuration) command 2-230 per-VLAN spanning-tree plus See STP physical-port learner 2-226 PID, displaying 2-323 PIM-DVMRP, as multicast router learning method 2-133 Cisco Catalyst Blade Switch 3020 for HP Command Reference IN-9 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 736
802.1x AAA accounting methods 2-1 initialize an interface 2-71 MAC authentication bypass 2-72 manual control of authorization state 2-77 multiple hosts on authorized port 2-16 debug messages, display B-2 displaying 2-270 IN-10 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 737
for IP phones 2-213 VLAN-based 2-215 quality of service See QoS querytime, MVR 2-220 queue-set command 2-244 R radius-server dead-criteria command 2-245 radius-server host command 2-247 rapid per-VLAN spanning-tree plus See STP Cisco Catalyst Blade Switch 3020 for HP Command Reference IN-11 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 738
to 2-216 displaying 2-377 start new 2-216 IN-12 Cisco Catalyst Blade Switch 3020 for HP Command Reference S secure ports, limitations 2-504 sending flow-control packets 2-91 service password-recovery command 2-254 service-policy command 2-256 set (boot loader) command A-20 set command 2-259 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 739
platform igmp snooping command C-8 show platform layer4op command C-10 show platform mac-address-table command C-11 show platform messaging command C-12 -server host command 2-428 snmp trap mac-notification command 2-432 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference IN-13 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 740
MAC address notification trap 2-432 enabling the MAC address notification feature 2-156 enabling the sending of 2-425 SoftPhone See Cisco SoftPhone software images deleting 2-51 downloading 2-8 upgrading 2-8 uploading 2-14 software 14 Cisco Catalyst Blade Switch 3020 for HP Command Reference - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 741
extracting 2-11 TDR, running 2-519 test cable-diagnostics tdr command 2-519 traceroute mac command 2-520 traceroute mac ip command 2-523 trunking, VLAN mode 2-498 trunk mode 2-498 trunk ports command 2-531 unicast storm control 2-488 Cisco Catalyst Blade Switch 3020 for HP Command Reference IN-15 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 742
boot loader) command A-24 upgrading software images 2-8 monitoring status of 2-269 displaying 2-416 IN-16 Cisco Catalyst Blade Switch 3020 for HP Command Reference VLAN ID range 2- B-76 displaying configurations 2-410 extended-range 2-532 MAC addresses displaying 2-361 number of 2-349 media types - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 743
2-532, 2-541 statistics 2-420 status 2-420 status display fields 2-422 vtp (global configuration) command 2-555 vtp (VLAN configuration) command 2-559 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference IN-17 - HP 3020 | Cisco Catalyst Blade Switch 3020 for HP Command Reference, Rel. 12.2(2 - Page 744
Index IN-18 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Cisco Catalyst Blade Switch 3020 for HP
Command Reference
Cisco IOS Release 12.2(25)SEF
June 2006
Text Part Number: OL-8916-01