HP 376227-B21 HP 4x Fabric Copper Cable Minimum Bend Radius

Read This First

HP 4x Fabric Copper Cable Minimum

Bend Radius

Handling or installing an InfiniBand technology cable in a manner that results in

a tight bend radius or excessive twisting can result in immediate or latent failure

of the cable. The table and sketch below show the minimum bend radius to

prevent problems with the HP 1m 4x Fabric Copper Cable (376229-001), HP

3m 4x Fabric Copper Cable (376229-002), and HP 5m 4x Fabric Copper Cable

(376229-003).

Part number

Length

R1 – Minimum bend

radius at the connector

R2 – Minimum bend radius

away from a connector

376229-001

1m

> 4.6" (11.68 cm)

> 2.3" (5.84 cm)

376229-002

3m

> 4.6" (11.68 cm)

> 2.3" (5.84 cm)

376229-003

5m

> 4.6" (11.68 cm)

> 2.3" (5.84 cm)

© Copyright 2004 Hewlett-Packard Development Company, L.P.

Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein.

The information in this document is provided “as is” without warranty of any kind and is subject to change

without notice. The warranties for HP products are set forth in the express limited warranty statements

accompanying such products. Nothing herein should be construed as constituting an additional warranty.

First Edition (November 2004)

Part Number 380430-001

380430-001