HP 610 Memory Modules - Windows Vista
HP 610 - Compaq - C T1500 Manual
UPC - 884962591246
View all HP 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 610 manual content summary:
- HP 610 | Memory Modules - Windows Vista - Page 1
Memory Modules User Guide - HP 610 | Memory Modules - Windows Vista - Page 2
such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: June 2009 Document Part Number: 533488-001 Product notice This user guide describes features - HP 610 | Memory Modules - Windows Vista - Page 3
Table of contents Adding or replacing memory modules Adding or replacing a memory module in the expansion memory module slot 2 Upgrading a memory module in the primary memory module slot 5 Index ...8 iii - HP 610 | Memory Modules - Windows Vista - Page 4
iv - HP 610 | Memory Modules - Windows Vista - Page 5
of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries - HP 610 | Memory Modules - Windows Vista - Page 6
the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the memory module compartment cover screw (1). 8. Lift the memory - HP 610 | Memory Modules - Windows Vista - Page 7
the memory module, until the retention clips snap into place. 11. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 12. Close the cover (2). Adding or replacing a memory module in the expansion memory module slot 3 - HP 610 | Memory Modules - Windows Vista - Page 8
13. Tighten the memory module compartment cover screw (3). 14. Replace the battery. 15. Turn the computer right-side up, and then reconnect external power and external devices. 16. Turn on the computer. 4 Adding or replacing memory modules - HP 610 | Memory Modules - Windows Vista - Page 9
the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the memory module compartment cover screw (1). 8. Lift the memory - HP 610 | Memory Modules - Windows Vista - Page 10
memory module, until the retention clips snap into place. 11. Align the tabs (1) on the memory module compartment cover with the notches on the computer. NOTE: If you removed a memory module from the expansion memory slot before removing the primary memory module, replace the memory module in the - HP 610 | Memory Modules - Windows Vista - Page 11
12. Close the cover (2). 13. Tighten the memory module compartment cover screw (3). 14. Replace the battery. 15. Turn the computer right-side up, and then reconnect external power and external devices. 16. Turn on the computer. Upgrading a memory module in the primary memory module slot 7 - HP 610 | Memory Modules - Windows Vista - Page 12
Index M memory module adding 2 inserting 6 removing 2, 5 replacing 2, 5 upgrading primary 5 memory module compartment cover removing 2 replacing 3 memory, replacing memory modules 2, 5 8 Index - HP 610 | Memory Modules - Windows Vista - Page 13
Memory Modules
User Guide