HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 130
deny (standard ACLs), Synopsis, count, no deny, Operands, Defaults, Command, Modes, Description, Usage
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
8 deny (standard ACLs) DRAFT: BROCADE CONFIDENTIAL deny (standard ACLs) Synopsis Operands Defaults Command Modes Description Usage Guidelines Example See Also Configures a MAC address rule to drop traffic based on the source MAC address. deny {MAC_ACL | any} [count] no deny {MAC_ACL | any} MAC_ACL any count Specifies the source host MAC address for which to set deny conditions. Use the format HHHH.HHHH.HHHH. Specifies any source MAC address. Enables counting of the packets matching the rule. By default, no MAC ACLs are configured. Feature Access Control List Configuration mode Use this command to configure rules to match and to drop traffic based on the source MAC address. You can also enable counters for a specific rule. There are 255 ACL counters supported per port group. Use the no deny command to remove a rule from the MAC ACL. There are no usage guidelines for this command. To create a rule in a MAC standard ACL to drop traffic from the source MAC address 0022.3333.4444 and to enable the counting of packets: switch(conf-macl-std)#deny 0022.3333.4444 count To delete a rule from a MAC standard ACL: switch(conf-macl-std)#no deny 0022.3333.4444 mac-access-list extended, permit 112 Converged Enhanced Ethernet Command Reference 53-1001762-01