HP AJ732A Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2
HP AJ732A - Cisco MDS 9134 Fabric Switch Manual
![]() |
UPC - 883585789481
View all HP AJ732A manuals
Add to My Manuals
Save this manual to your list of manuals |
HP AJ732A manual content summary:
- HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 1
includes the following sections: • Introduction, page 2 • Components Supported, page 2 • Software Download Process, page 7 • Upgrading Your Cisco MDS SAN-OS Software Image, page 10 • Downgrading Your Cisco MDS SAN-OS Software Image, page 20 • New Features in Cisco MDS SAN-OS Release 3.2(1a), page 23 - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 2
management. Components Supported Table 1 lists the SAN-OS software part number and hardware components supported by the Cisco MDS 9000 Family. Note To use the Cisco Storage Services Enabler package, Cisco MDS SAN-OS Release 1.3(5) or later must be installed on the MDS switch. Table 1 Cisco MDS - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 3
. Storage Services Enabler package. MDS 9500 Series with SSM Storage Services Enabler package. MDS 9200 Series with SSM Data Mobility Manager (DMM) MDS 9500 Series with SSM Data Mobility Manager (DMM) MDS 9200 Series with SSM Data Mobility Manager (DMM) for 180 days MDS 9500 Series with - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 4
[email protected] Table 1 Cisco MDS 9000 Family Supported Software and Hardware Components (continued) Component Chassis Part Number DS-C9513 DS-C9509 DS-C9506 DS-C9222i-K9 DS-C9216-K9 DS-C9216A-K9 DS-C9216i-K9 DS-C9140-K9 DS-C9124-K9 DS-C9134-K9 DS-C9120-K9 DS-HP-FC-K9 Description - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 5
Send documentation comments to [email protected] Table 1 Cisco MDS 9000 Family Supported Software and Hardware Components (continued) Component External crossbar module Supervisor modules Switching modules Services modules Optics Part Number DS-IBM-FC-K9 DS-13SLT-FAB1 Description - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 6
Supports distances up to 4 km. MDS 9500 Series and 9200 Series, except for the MDS MDS 9000 Management Software and Documentation MDS 9000 Family CD-ROM, spare. 1. SFP = small form-factor pluggable 2. CWDM = coarse wavelength division multiplexing Cisco MDS 9000 Family Release Notes for Cisco MDS - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 7
upgrade your Cisco MDS 9000 switch. Issuing the install all command from the CLI, or using Fabric Manager to perform the downgrade, enables the compatibility check. The check indicates if the upgrade can happen nondisruptively or disruptively depending on the current configuration of your - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 8
of the Cisco MDS 9000 Family CLI Configuration Guide for more details. Note If you would like to request a copy of the source code under the terms of either GPL or LGPL, please send an e-mail to [email protected]. Selecting the Correct Software Image for an MDS 9100 Series Switch - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 9
to Supervisor-1 modules is not supported. To migrate from a Supervisor-1 module to a Supervisor-2 module, refer to the step-by-step instructions in the Cisco MDS 9000 Family CLI Configuration Guide. Configuring Generation 2 Switching Modules The Cisco MDS 9500 Multilayer Directors are designed to - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 10
as well as Fabric Manager. The complete installation instructions are provided in the "Installation of Cisco MDS SAN-OS and Fabric Manager" section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide, and are available on-screen once you launch the Fabric Manager installer from the CD-ROM - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 11
database, follow the instructions in the "Installation of Cisco MDS SAN-OS and Fabric Manager" section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Note If you are upgrading a previous installation of Fabric Manager, make sure the previous installation is installed and running. Do - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 12
you have this problem, save the jnlp link as file, increase the heap limit to 512 MB, and run javaws element-manager.jnlp at the shell prompt. General Upgrading Guidelines Use the following guidelines when upgrading to Cisco MDS SAN-OS Release 3.2(1a): • Install and configure dual supervisor modules - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 13
for all SAN-OS releases. - SSM: Intelligent services traffic on the SSM, such as SANTap, NASB, Cisco SAN-OS Release 2.1.(1a), 2.1(1b), or 2.1.(2a). See the "Upgrading with IVR Enabled" section on page 15 for these instructions Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1a) 13 - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 14
-OS Release 1.3(4a), then to Release 2.1(2b), and then upgrade to Release 3.2(1a). Use Table 6 to determine your FICON nondisruptive upgrade path to Cisco MDS SAN-OS Release 3.2(1a). Find the image release number you are currently using in the Current Release with FICON Enabled column of the table - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 15
issue the copy running-config startup-config command to have the configuration take effect. Upgrading with IVR Enabled An Inter-Switch Link (ISL) flap resulting in fabric segmentation or a merge during or after an upgrade from Cisco MDS SAN-OS Release 2.0(x) to a later image where IVR is enabled - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 16
Upgrading to SAN-OS Release 3.2(1a) Starting with Cisco MDS SAN-OS Release 3.0(1), the SSM front panel ports can no longer be configured in auto mode, which is the default for releases prior to Release 3.0(1). Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1a) 16 OL-14116-02 - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 17
on upgrading SAN-OS software, see the "Upgrading Your Cisco MDS SAN-OS Software Image" section on page 10. If the configuration is not updated before the upgrade, the installation process for the new image will automatically convert all ports configured in auto mode to Fx mode. This change in mode - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 18
. Refer to the Cisco MDS 9000 Family Release Notes for Cisco MDS 9000 EPLD Images to upgrade your EPLD image. - Refer to the Cisco MDS Storage Services Module Interoperability Support Matrix and the "Managing Modules" chapter in the Cisco MDS 9000 Family CLI Configuration Guide, Release 3.x, for - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 19
bootflash using either Fabric Manager or the copy command. If the switch fails to boot, then follow the recovery procedure described in the "Troubleshooting Installs, Upgrades, and Reboots" section of the Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x. Upgrading a Cisco MDS 9124 Switch If - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 20
downgrade your Cisco MDS SAN-OS Release 3.2(1a): • Install and configure dual supervisor issue the command again. • Disable all features not supported by the downgrade release. Use the show incompatibility system for all SAN-OS releases. - SSM: Intelligent services traffic on the SSM, such as SANTap, - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 21
- iSNS: The iSNS feature does not support a graceful downgrade from Cisco MDS SAN-OS Release 3.2(1a) to any earlier SAN-OS release. Prior to a downgrade from Cisco SAN-OS 3.2(1a), disable the MDS iSNS server and remove all configurations associated with the MDS iSNS client. Use Table 7 to determine - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 22
supported by your Cisco SAN-OS release. Refer to the Cisco MDS SAN-OS Release Compatibility Matrix for Storage Service Interface Images. • SSM intelligent services ssm enable feature configuration mode CLI command to disable these features. Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 23
Unit Port (CUP) management, and switch cascading. The Cisco MDS-18/4 Module can be used with the Cisco MDS 9200 Series of Multilayer Fabric Switches and the Cisco MDS 9500 Series of Multilayer Directors. Note The MSM-18/4 module supports both the IP Storage (IPS) and Storage Services Interface (SSI - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 24
Cisco Data Mobility Manager Cisco MDS Data Mobility Manager (DMM) for the Cisco MDS 9000 family of switches provides capabilities and features that simplify data migration and minimize service • Dual fabric support • CLI and wizard-based management with Cisco Fabric Manager The Cisco DMM can be - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 25
• Digital diagnostic values are viewable in Cisco Fabric Manager (previously only through CLI) Universal Serial Bus Support The two Universal Serial Bus (USB) 2.0 compatible ports on the Cisco MDS 9500 Series Supervisor-2 modules are available for use with Cisco SAN-OS release 3.2(1a). USB flash - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 26
Upgrades for the Cisco MDS 9222i Switch Cisco SAN-OS 3.2(1a) includes non-disruptive, in service software upgrades (ISSU) for the Cisco MDS 9222i switch. This feature does not apply to the Cisco MDS 9216 and 9216i fabric switches. Cisco Fabric Manager Enhancements New Installation Process Starting - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 27
process, see "Upgrading Your Version of Cisco Fabric Manager" section on page 10. For complete Fabric Manager installation instructions, refer to the "Installation of Cisco MDS SAN-OS and Fabric Manager" section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide, or use the on-screen - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 28
the module level. SAN Device Virtualization Scalability Cisco SAN-OS Release 3.2(1a) supports 800 SAN device virtualization (SDV) virtual instructions in the Cisco MDS 9000 Data Mobility Manager Configuration Guide. • A storage type job in DMM cannot be restored from a saved ASCII configuration - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 29
session maximum Using NPIV on Cisco Fabric Switches In Cisco SAN-OS Release 3.2(1a), the Cisco MDS 9134 Switch, the Cisco MDS 9124 Switch, the Cisco Fabric Switch for HP c-Class BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter do not support hardware-enforced zoning for devices attached - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 30
Restrictions Send documentation comments to [email protected] The Cisco MDS 9222i and the MSM-18/4 do not support Ether channel. The Cisco MDS 9222i supports only the following modules in slot 2: • The Storage Services Module (SSM) • The Cisco MDS 9000 18/4-Port Multiservice Module (MSM-18 - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 31
Cisco MDS SAN-OS Release 3.0(1), the SSM front panel ports can no longer be configured in auto mode, which is the default for releases prior to Release 3.1(1). For instructions about how to modify the configuration high and/or medium priority class of service (COS) relative to the low priority COS - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 32
VSAN following an upgrade from any Cisco SAN-OS 2.x release to any Cisco SAN-OS 3.x release. Although you can configure the default-zone settings in the O O O O O O O O O O O O O O O O O O O O Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1a) 32 OL-14116-02 - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 33
in an MDS 9500 series switch, the access control list (ACL) process on the module might fail. As a result, the ISSU operation fails, which causes a disruptive reload of the module. Workaround: This issue is resolved. • CSCsk73520 Symptom: In some cases, when Fabric Manager Server is installed on - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 34
is to withdraw the domain and refresh IVR. Follow these steps: 1. Identify domains with problem using the show ivr internal dep command. switch# show ivr internal dep Internal information for DEP FSM Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1a) 34 OL-14116-02 - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 35
problem has occurred the switch. 2. Withdraw the troubled Cisco MDS SAN-OS Release 3.2(1) on a Cisco MDS 9124 switch, an interface is shown as up, but there is no FLOGI information for the port in the FLOGI database. Workaround: Set the port mode to F. • CSCin95789 Symptom: When you configure Cisco - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 36
management port on MDS switches supports one user-configured IPv6 address, but does not support autoconfiguration of an IPv6 address in Cisco configuration changes. • CSCsk00953 Symptom: HP Blade Servers that are connected through an HP Virtual Connect (VC) FC module to a Cisco Fabric Switch for HP - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 37
works for the management port. Workaround: None. • CSCsk63929 Symptom: If DMM is provisioned on the SSM and you downgrade to a Cisco MDS SAN-OS release that does not support DMM, the configuration persists and the GUI and CLI show DMM as a provisioned application. Workaround: Manually remove the DMM - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 38
Guide • Cisco MDS 9500 Series Hardware Installation Guide • Cisco MDS 9200 Series Hardware Installation Guide • Cisco MDS 9100 Series Hardware Installation Guide Cisco Fabric Manager • Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide • Cisco MDS 9000 Family Fabric Manager Configuration - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 39
Storage Services Module Software Installation and Upgrade Guide • Cisco MDS 9000 Family CLI Quick Configuration Guide • Cisco MDS 9000 Family CLI Configuration Guide • Cisco MDS 9000 Family Command Reference Troubleshooting and Reference • Cisco MDS 9000 Family Troubleshooting Guide • Cisco MDS 9000 - HP AJ732A | Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2 - Page 40
cisco.com Obtaining Documentation, Obtaining Support, and Security Guidelines For information on obtaining documentation, obtaining support is unintentional and coincidental. © 2007 Cisco Systems, Inc. All rights reserved. Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1a) 40
![](/manual_guide/products/hewlettpackard-aj732a-cisco-mds-9000-family-release-notes-cisco-mds-sanos-release-321a-ol1411602-2007-3fb5382/1.png)
Send documentation comments to [email protected]
Americas Headquarters:
© 2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706
USA
Cisco MDS 9000 Family Release Notes
for Cisco MDS SAN-OS Release 3.2(1a)
Release Date: October 6, 2007
Part Number: OL-14116-02
This document describes the caveats and limitations for switches in the Cisco MDS 9000 Family. Use
this document in conjunction with documents listed in the
“Related Documentation” section on page 38
.
Note
Release notes are sometimes updated with new information on restrictions and caveats. Refer to the
following website for the most recent version of the
Cisco MDS 9000 Family Release Notes
:
Contents
This document includes the following sections:
•
Introduction, page 2
•
Components Supported, page 2
•
Software Download Process, page 7
•
Upgrading Your Cisco MDS SAN-OS Software Image, page 10
•
Downgrading Your Cisco MDS SAN-OS Software Image, page 20
•
New Features in Cisco MDS SAN-OS Release 3.2(1a), page 23
•
Changes in Existing Features, page 28
•
Limitations and Restrictions, page 28
•
Caveats, page 32
•
Related Documentation, page 38
•
Obtaining Documentation, Obtaining Support, and Security Guidelines, page 40