HP BladeSystem c3000 HP BladeSystem c3000 Enclosure Setup and Installation Gui
HP BladeSystem c3000 Manual
 |
View all HP BladeSystem c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP BladeSystem c3000 manual content summary:
- HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 1
HP BladeSystem c3000 Enclosure Setup and Installation Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 3
link module 50 Connecting locally to a server blade with video and USB devices 50 Cabling and powering up the enclosure 53 Cabling the enclosure ...53 Cabling the HP BladeSystem Onboard Administrator 53 Enclosure link cabling ...54 Cabling a PC to the enclosure service port 55 Contents 3 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 4
Cabling the network to the enclosure 55 Installing a PDU ...56 Powering up the enclosure...56 Using the HP BladeSystem Insight Display 57 Insight Display overview...57 Installing and configuring the Insight Display 57 Accessing the HP BladeSystem Insight Display 63 Navigating the Insight Display - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 5
installation Pallet contents Item 1 2 3 4 5 6 7 8 9 Name HP BladeSystem c3000 Enclosure Device bay blank Power supply blank Power supply (quantity as ordered) Half-height device (quantity as ordered) Full-height device (quantity as ordered) HP c-Class blade SUV cable (local I/O cable) Fan blank HP - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 6
SmartStart software that optimizes single-server setup Instructions for blades, options, and interconnects A checklist that guides you through installation of the enclosure and its components Platinum features The HP BladeSystem c3000 Platinum Enclosure has the following features that are - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 7
requirements The HP BladeSystem c3000 Enclosure (referred to as the enclosure) can be used in a rack-free environment. The following conditions must be met when performing a rack-free installation: • A fully-populated enclosure can weigh up to 131.5 kg (290 lb). The object supporting the enclosure - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 8
two people support the weight of the enclosure. WARNING: Before installing an enclosure in the rack, be sure that all hot-plug power supplies, server blades, and interconnects are removed from the enclosure. Blanks can be left in the enclosure. WARNING: Be sure to install enclosures starting from - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 9
hardware from damage caused by power surges and voltage spikes and keeps the system in operation during a power failure. IMPORTANT: Data on the dimensions and weights of HP BladeSystem c-Class components can be found in the HP BladeSystem c-Class Maintenance and Service Guide. The same data can be - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 10
, do not overload the AC supply branch circuit that provides power to the rack. Consult the electrical authority having jurisdiction over wiring and installation requirements of your facility. CAUTION: Protect the enclosure from power fluctuations and temporary interruptions with a regulating - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 11
installation, such as branch wiring and receptacles, are listed or certified grounding-type devices. Because of the high ground-leakage currents associated with this equipment, HP . Using common power outlet strips to supply power to this equipment is not recommended. Planning the installation 11 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 12
Administrator blank Device bay numbering Each enclosure requires interconnects to provide network access for data transfer. Interconnects reside in bays located on the rear of the enclosure. Be sure to review device bay numbering to determine which external network connections on the interconnects - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 13
Full-height device bay numbering Half-height device bay numbering Identifying components and LEDs 13 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 14
HP BladeSystem Insight Display components Item 1 2 3 4 5 6 Description Insight Display screen Left arrow button Right arrow button OK button Down arrow button Up arrow button Function Displays Main Menu error messages and instructions Moves the menu or navigation bar selection left one position - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 15
KVM module bay Interconnect bay 1 Fan bays ("Fan bay numbering" on page 16) Interconnect bay 2 Enclosure link-down port Enclosure link-up port Onboard Administrator 1/iLO port Onboard Administrator 2/iLO port Power supply bays Interconnect bay 4 Interconnect bay 3 Identifying components and LEDs - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 16
Fan bay numbering Fan LEDs LED color Solid green Solid amber Flashing amber Fan status The fan is working. The fan has failed. See the Insight Display screen. Identifying components and LEDs 16 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 17
Power supply bay numbering Power supply LED Power LED Off Green Green Off Status No AC power to power supply units AC is present. Standby output is on, output is disabled. AC is present. Standby output is on, power supply DC output is on and OK. Power supply failure (includes overvoltage and - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 18
bay numbering To support network connections for specific signals, install the interconnect module in the appropriate bay. Server blade signal NICs 1, 2, 3, and 4 (embedded) Mezzanine 1 Mezzanine 2 Mezzanine 3 Interconnect bay number 1 Interconnect bay label Notes - 2 Four port cards connect - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 19
enclosure. 4. Install the enclosure components ("Component installation" on page 26) into the enclosure. 5. Connect the enclosure components ("Cabling and powering up the enclosure" on page 53) in the enclosure. 6. Connect the AC power cables and power up the enclosure. 7. Configure the enclosure - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 20
1. With the enclosure still on the pallet, remove all components from the front and rear of the enclosure. 2. Remove the front cage: a. Loosen the four thumbscrews inside the front cage assembly and open the hinges completely. Installing components 20 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 21
the safety stops. c. Grasp the handholds on the sides of the enclosure. The release levers are located inside the handholds. d. Disengage the as possible. The front end of the front cage is heavy and the handholds provide a more balanced location to distribute the weight of the cage during lifting - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 22
up to 131.5 kg (290 lb). 2. Place the enclosure on a flat, sturdy surface to support the enclosure. 3. Install the enclosure components ("Component installation" on page 26) into the enclosure. Rack installation CAUTION: Always plan the rack installation so that the heaviest item is on the bottom of - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 23
rack template ships with the rack rail kit and provides detailed instructions on where to position the enclosure rack rails and where to install the four cage or clip nuts. Each enclosure kit includes the rack rails recommended for that enclosure. NOTE: Four cage nuts and four clip nuts are included - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 24
rack above chest level, a third person must assist with aligning the enclosure with the rails while the other two people support the weight of the enclosure. 1. At the front of the rack, lift and align the enclosure guiding fins with the guiding groove in the rack rails. IMPORTANT: Be sure that the - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 25
it is difficult to change the location of components after they are installed. Installing the front cage into the enclosure 1. Position the front cage at the front of the enclosure, and align the front cage guiding fins with the guiding groove in the rack rails. 2. Slide the front cage fully into - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 26
installation instructions for the individual enclosure components. All components must be installed and cabled before you power up the enclosure. There is no specific installation order requirement for the enclosure components. Installing a power supply 1. Slide the power supply into the power - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 27
2. Install power supply blanks in any unused power supply bay. Populating power supply bays For AC redundant (N+N power supplies) configurations, an even number of power supplies is required. For this configuration, where N is the number of power supplies being used, populate the power supply bays - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 28
4. Remove the connector covers. 5. Prepare the blade for installation. Installing components 28 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 29
to install six HP Active Cool Fans, blades can be installed in any configuration. For more information, see "Installing fans (on page 37)" and "Full-height device bay numbering (on page 13)." CAUTION: To prevent improper cooling and thermal damage, do not operate the blade or the enclosure unless - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 30
2. Slide the divider locking tab down: Installing components 30 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 31
of the enclosure until the divider stops. Slide the divider to the left to disengage the tabs from the divider wall, and then rotate the divider clockwise. For the mini divider, push the divider toward the back of the enclosure until the divider drops out of the chassis. Installing components 31 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 32
bay blank 1. Obtain the coupler plate: o If you are using a device bay blank that came with the enclosure, the coupler plate can be found with the contents of the full-height device shipping box. o If you , and then slide the coupler plate back until it snaps into place. Installing components 32 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 33
bottom of the second blank on to the tabs on the coupler plate, and then slide the second blank forward until it snaps in place. 4. Install the full-height blank into the device bay. Installing a half-height blade 1. Remove the blank. 2. Install the device bay shelf, if applicable - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 34
install six HP Active Cool 100 Fans, blades can be installed in any configuration. For more information, see "Installing fans (on page 37)" and "Half-height device bay numbering (on page 13)." CAUTION: To prevent improper cooling and thermal damage, do not operate the blade or the enclosure unless - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 35
the full-height blade, storage blade, or device bay blank. 2. Install the divider or proceed to step 3 to install the half-height divider. a. Align the three tabs on the top edge of the divider with the openings in the enclosure, and then slide the divider straight back. b. Push the divider up - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 36
c. Slide up the divider locking tab to lock it. 3. Install the half-height divider. a. Slide the divider locking tab down: b. Align the three tabs on the bottom edge of the divider with the openings in the enclosure, and rotate the divider counter-clockwise. CAUTION: Be sure that all five tabs ( - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 37
the half-height divider locking tab up to lock it. Installing fans NOTE: The HP BladeSystem c3000 Enclosure ships with four HP Active Cool 100 fans and supports up to six fans. Install fans based on the number of storage or server blades installed: • For one to four half-height storage or server - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 38
1. Turn the handle counterclockwise to the unlock position, and pull the fan or fan blank from the enclosure. 2. Slide the fan into the enclosure until it locks in place. NOTE: When installing a fan in the top row of fan bays, orient the fan so that the LED is in the lower right corner. When - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 39
of the enclosure. Installing a KVM module You can use the optional HP BladeSystem c3000 KVM Module to connect the enclosure to a USB keyboard, video monitor, and USB mouse (KVM). You can also connect the KVM module to the HP Server Console Switch or HP IP Console Switch using the HP USB Interface - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 40
KVM module into the bay. When fully inserted, the device locks into place. Attaching components to HP BladeSystem c3000 KVM module For local access to the enclosure: 1. Connect a monitor to the video connector on the c3000 KVM module. 2. Connect a USB keyboard and mouse to the USB connectors on the - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 41
2. Connect the CAT5 end of the KVM interface adapter to an optional HP Console Switch. Removing the HP BladeSystem c3000 KVM module 1. Disconnect all cables from the c3000 KVM module. 2. Press the tab, and then pull the c3000 KVM module from the enclosure. Installing components 41 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 42
does not coincide with the mezzanine card installation, the ports on the interconnect module will not function. NOTE: For more information on how and where to install mezzanine cards, see the server-specific user guide. To install an interconnect module: 1. Remove the interconnect blank. 2. If - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 43
3. Install the interconnect module in the enclosure. Mapping to interconnect ports Several port types are referenced in the following tables. • Examples of 1x ports are 1-Gb Ethernet (1 GbE) switch modules and Fibre Channel interconnect modules. • An example of a 2x port is a Serial Attached SCSI ( - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 44
Mapping half-height blades The following table lists the available configurations for half-height devices installed in device bay N (1-8) Connection Port number Embedded NIC NIC 1 NIC 2 Mezzanine slot 1-1x or 1x/2x port 1 2x cards (4x cards are not 1x/2x port 2 supported in this slot) - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 45
Connection Port number Mezzanine slot 2-1x or 2x cards Mezzanine slot 2-4x cards 1x/2x port 1 1x/2x port 2 1x/2x port 3 1x/2x port 4 4x port 1 4x port 2 Mapping full-height blades Connects to interconnect bay/port 3/Port N 4 Port N 3/Port N+8 4/Port N+8 3/Port N 3/Port N+8 Comments One or two - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 46
Connection Port number Embedded NIC Mezzanine slot 1-1x or 2x cards (4x cards are not supported in this slot) Mezzanine slot 2-1x or 2x cards Mezzanine slot 2-4x cards Mezzanine slot 3-1x or 2x cards Mezzanine slot 3-4x cards NIC 1 NIC 2 NIC 3 NIC 4 1x/2x port 1 1x/2x port 2 1x/2x port 3 1x/2x - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 47
Mapping BL2x220c blades To support network connections for specific signals, install an interconnect module in the bay corresponding to the embedded NIC or mezzanine signals. Connection Embedded NIC Port number Server A: NIC 1 Server A: NIC 2 Server B: NIC 1 Connects to interconnect Comments - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 48
Connection Port number Mezzanine slot 1-1x, Server A: Mezz port 1 2x, or 4x cards Server A: Mezz port 2 Server B: Mezz port 1 Server B: Mezz port 2 Connects to interconnect Comments bay/port 3/Port N 4/Port N 3/Port N+8 4/Port N+8 • Two single-wide modules or one double-wide interconnect - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 49
You can enable these signals to provide module-to-module connections. Onboard Administrator disables the interconnect bay crosslinks in instances where dividers The enclosure ships with interconnect bay dividers installed. The interconnect bay dividers must be removed before installing double-wide - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 50
the rail, and slide the divider into the enclosure until it locks into place. Installing the enclosure/Onboard Administrator link module 1. Slide the enclosure/Onboard Administrator link module into the bay until the device locks into place. Connecting locally to a server blade with video and USB - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 51
configuring a blade or loading software updates and patches from a USB CD/DVD-ROM or a USB diskette. 1. Connect the local I/O cable to the blade. 2. Connect the video connector to a monitor. 3. Connect a USB hub to one USB connector. 4. Connect the following to the USB hub: Installing components 51 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 52
the blade. The USB hub provides additional connections. NOTE: The Onboard Administrator with version 2.0 or greater firmware supports attaching a CD or DVD to any or all iLOs using the optional enclosure DVD drive or an external HP DVD drive for operating system installation or software updates. See - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 53
Planning Guide on the Documentation CD or the HP website (http://www.hp.com/go/bizsupport). 3. Connect to the AC or DC power source in your facility and power up the enclosure. Cabling the HP BladeSystem Onboard Administrator Item Connector 1 Enclosure link-down port Description Connects to - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 54
the service port, and the enclosure link-down port on the bottom linked enclosure is unused. NOTE: If more c-Class enclosures are added to the rack at a later time, the open enclosure link-up port on the top enclosure can be used to link the new enclosure. NOTE: The HP BladeSystem c-Class enclosure - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 55
, see the HP BladeSystem Onboard Administrator User Guide. Cabling the network to the enclosure Cable the interconnect modules to the enclosure. See "Mapping to interconnect ports (on page 43)" and the supporting documentation that came with your interconnect modules for specific details on cabling - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 56
the installation instructions that came with the PDU for specific details on installing the PDU into the rack. NOTE: Total VA load of the attached enclosures should not exceed the VA capacity of the PDU. Do not exceed the rated current on circuit breakers. To connect power to the PDU: 1. Connect the - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 57
, the wizard powers off the enclosure. After configuring the enclosure, the Insight Display verifies that there are no installation or configuration errors. If errors are present, the Insight Display guides you through the process of correcting the errors. Using the HP BladeSystem Insight Display 57 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 58
in the Enclosure Settings screen: Power Mode-The default setting is AC Redundant. The following selections are valid: o AC Redundant o Power Supply Redundant o None Power Limit-The default setting is Not Set. You can change the limit by increments of 50 Watts. Using the HP BladeSystem Insight - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 59
the end of the name. DVD Drive-The default setting is Disconnected on all blades. The DVD Connect Status menu displays the current DVD connection status with an icon. Select a DVD icon on the DVD Connect menu to navigate to the Blade DVD Connection menu. Using the HP BladeSystem Insight Display - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 60
change the Enclosure DVD settings. To connect any power state. o Disconnect DVD Hardware-Disconnects the current media connection and returns to the DVD Connect Status menu. The following selections are valid: o No Power Change-Connects the selected media to the server only. Using the HP BladeSystem - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 61
the current enclosure only. The Insight Display installation wizard must run on each detected enclosure. Select this option if each enclosure requires different power settings. IMPORTANT: If your facility uses Static IP addressing for the Onboard Administrator modules, you must manually enter those - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 62
operation of the enclosure and should be corrected immediately. 11. Open a browser and connect to the active Onboard Administrator module using the Onboard Administrator IP address that was configured during the Insight Display installation wizard process. Using the HP BladeSystem Insight Display 62 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 63
password from the tag supplied with the Onboard Administrator module to access the remote Onboard Administrator web interface and complete the Onboard Administrator first time installation wizard. Accessing the HP BladeSystem Insight Display 1. To access the Insight Display, push on the exposed end - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 64
• Enclosure Settings • Enclosure Info ("Enclosure Info screen" on page 67) • Blade or Port Info ("Blade or Port Info screen" on page 68) • Turn Enclosure UID on/off ("Turn Enclosure UID On/Off screen" on page 69) • View User Note ("View User Note screen" on page 70) Using the HP BladeSystem Insight - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 65
are installed and on. A light green rectangle represents a component that is installed but powered off with no errors. The only option active on the navigation bar is Back to Main Menu. Select Back to Main Menu, and press the OK button to return to the main menu. Using the HP BladeSystem Insight - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 66
feature can be used to install an operating system or software on the blade(s). If the optional DVD drive is not present, an external HP USB DVD drive can be used with this feature instead. TIP: Set a PIN to protect the enclosure settings from changes. Using the HP BladeSystem Insight Display 66 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 67
information about the enclosure, including: • Active OA IP address • Active OA Service IP address • Current health status of the enclosure • Current enclosure ambient temperature • Current AC input power to the enclosure • Enclosure name • Rack name Using the HP BladeSystem Insight Display 67 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 68
the blade number, then press the OK button. Select Blade Info or Port Info, and press the OK button. To view information about the blade, select Blade Info and press the OK button. To view the ports used by a specific blade, select Port Info and press the OK button. Using the HP BladeSystem Insight - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 69
. The two embedded NICs are connected to particular port numbers on the interconnect modules. Turn Enclosure UID On/Off screen The main menu option displays "Turn Enclosure UID Off" when the enclosure UID is active, and displays "Turn Enclosure UID on" when the enclosure UID is off. Selecting Turn - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 70
an enclosure Insight Display. The technician uses the Insight Display buttons to select from a set of prepared responses, or dials in a custom response message on the ? line. To send a response back to the Administrator, navigate the cursor to Send, then press the OK button. Using the HP BladeSystem - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 71
use either the port located on the active Onboard Administrator module on the front of the enclosure or a USB port on the optional KVM module. To access the USB Menu: 1. Insert a USB key into Onboard Administrator. 2. From the Main Menu, select USB Menu. Using the HP BladeSystem Insight Display 71 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 72
Save Configuration-Select this option to save the enclosure configuration to a file on the USB key. KVM Menu screen If the optional c3000 KVM module is installed, the Insight Display Main Menu displays a KVM Menu by choosing one of the following options: Using the HP BladeSystem Insight Display 72 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 73
the USB keyboard. o If the KVM module is connected to an HP rack KVM switch using a VGA or USB adapter, press PrtSc to activate the HP rack KVM selection menu. 2. Select the HP rack KVM port connected to the enclosure and press Enter to select that Enclosure KVM Menu. If the screen is blank, touch - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 74
to change the enclosure DVD connection for this server. • Server Health-Select this Health icon to display the current health state for that server. • Insight Display-Select the Insight Display button to access Insight Display screens from the KVM Menu. Using the HP BladeSystem Insight Display 74 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 75
. Press PrtSc to exit the OA CLI console and return to the KVM Menu. • Help-Select Help to view the KVM help information. Using the HP BladeSystem Insight Display 75 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 76
and solutions for troubleshooting HP BladeSystem c-Class enclosures. This guide explains how to use the Insight Display to troubleshoot enclosures, and it includes a flowchart to help you navigate the troubleshooting process. To view the guide, see the HP website (http://www.hp.com/support - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 77
health and safety requirements and guidelines for manual handling. • Obtain adequate assistance to lift and stabilize the chassis during installation or removal. • The server is unstable when not fastened to the rails. • When mounting the server in a rack, remove the power supplies and any other - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 78
are corrected. The errors in the following sections are specific to installation and initial configuration of the enclosure. To clear errors that occur after initial powerup and configuration, see the HP BladeSystem Onboard Administrator User Guide for information. The following types of errors can - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 79
on installing the mezzanine card, see the server-specific user guide on the Documentation CD. Device failure errors Device failure errors occur when a component has failed. Device failure errors can occur on all components, including: • Server blades • Storage blades • Power supplies • Interconnect - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 80
HP iLO 4 User Guide or HP Intelligent Provisioning User Guide on the HP website (http://www.hp.com/go/ilo/docs). • Onboard Administrator SHOW ALL report (for HP BladeSystem products (service upgrade), see the Support & Drivers website (http://www8.hp.com/us/en/support-drivers.html). If the problem - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 81
If assistance is required, you can call the HP Technical Support Center and a technician will help you over the telephone. HP specifies in the est obligatoire. Si vous demandez à HP de remplacer ces pièces, les coûts de déplacement et main d'œuvre du service vous seront facturés. Facultatif - Piè - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 82
optional ist. Diese Teile sind auch für Customer Self Repair ausgelegt. Wenn Sie jedoch den Austausch dieser Teile von HP vornehmen lassen möchten, können bei diesem Service je nach den für Ihr Produkt vorgesehenen Garantiebedingungen zusätzliche Kosten anfallen. Support and other resources 82 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 83
Lieferung am selben Tag oder innerhalb von vier Stunden gegen einen Aufpreis verfügbar. Wenn Sie Hilfe benötigen, können Sie das HP technische Support Center anrufen und sich von einem Mitarbeiter per Telefon helfen lassen. Den Materialien, die mit einem CSR-Ersatzteil geliefert werden, können Sie - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 84
cliente de HP, póngase HP siguiente (http://www.hp.com/go/selfrepair). Customer Self Repair Veel onderdelen in HP HP (of een HP Service product. OPMERKING: Sommige HP HP Service Partner om via de telefoon technische ondersteuning te ontvangen. HP a HP (ou fornecedores/parceiros de serviço da HP) concluir - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 85
transportadora/serviço postal a ser utilizado. Para obter mais informações sobre o programa de reparo feito pelo cliente da HP, entre em contato com o fornecedor de serviços local. Para o programa norte-americano, visite o site da HP (http://www.hp.com/go/selfrepair). Support and other resources 85 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 86
Support and other resources 86 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 87
Support and other resources 87 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 88
, and regulatory information, see Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products, available at the HP website (http://www.hp.com/support/Safety-Compliance-EnterpriseProducts). Turkey RoHS material content declaration Ukraine RoHS material content - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 89
Use a portable field service kit with a folding static-dissipating work mat. If you do not have any of the suggested equipment for proper grounding, have an authorized reseller install the part. For more information on static electricity or assistance with product installation, contact an authorized - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 90
Association CSR Customer Self Repair ESD electrostatic discharge IEC International Electrotechnical Commission iLO Integrated Lights-Out PDU power distribution unit RETMA Radio Electronics Television Manufacturers Association (rack spacing) TMRA recommended ambient operating temperature UID unit - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 91
documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (mailto:[email protected]). Include the document title and part number, version number, or the URL when submitting your feedback. Documentation feedback 91 - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 92
cabling, service port 55 Canadian notice 88 cautions 7, 64, 65, 77, 78 Chat Mode screen 70 components, front panel 12, 14 components, identification 12 components, installation 19, 26 configuration errors 79 configuring Onboard Administrator 71 configuring the enclosure with HP BladeSystem Insight - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 93
Administrator modules 50 installing PDU 56 installing power supplies 26 installing the rails 22, 23 interconnect bay dividers, installing 42, 49 interconnect bay dividers, removing 42, 49 interconnect bay numbering 18 interconnect modules, double-wide 49 interconnect ports, mapping to 43 J Japanese - HP BladeSystem c3000 | HP BladeSystem c3000 Enclosure Setup and Installation Gui - Page 94
blade installation 27, 33 service port cabling 55 space requirements 9 specifications 9, 10 static electricity 89 support 80 supported servers 76 symbols on equipment 76 T Taiwan battery recycling notice 88 technical support 80 telephone numbers 80 temperature requirements 9 troubleshooting 76
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
 |
 |
HP BladeSystem c3000 Enclosure
Setup and Installation Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 446987-005
February 2013
Edition: 5