HP BladeSystem c3000 HP ProLiant WS460c G6 Workstation Blade with WS460c Graph
HP BladeSystem c3000 Manual
View all HP BladeSystem c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP BladeSystem c3000 manual content summary:
- HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 1
for the HP ProLiant WS460c G6 Workstation Blade with WS460c Graphics Expansion Blade. This guide is for technicians that service computer equipment, recognize hazards in products with hazardous energy levels, and understand weight and stability precautions for rack installations. Part Number: 582470 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 3
write cache 49 SD card module ...50 Heatsink ...51 Processor...53 System board ...58 Battery replacement...67 Workstation blade release lever ...68 Release button ...69 HP Trusted Platform Module...70 Diagnostic tools ...71 Troubleshooting resources ...71 HP Insight Diagnostics ...71 Contents 3 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 4
...73 USB support ...73 Internal USB functionality ...73 External USB functionality ...74 Cabling ...75 BBWC battery pack cabling ...75 Using the HP c-Class Blade SUV Cable...75 Connecting locally to a workstation blade with video and USB devices 75 Accessing a workstation blade with local KVM 76 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 5
, you will be charged for the travel and labor costs of this service. • Optional-Parts for which customer self repair is optional. These parts are also designed for customer self repair. If, however, you require that HP replace them for you, there may or may not be additional charges, depending on - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 6
(5) jours ouvrés. La pièce et sa documentation doivent être retournées dans l'emballage fourni. Si vous ne retournez pas la pièce défectueuse, HP se réserve le droit de vous facturer les coûts de remplacement. Dans le cas d'une pièce CSR, HP supporte l'ensemble des frais d'expédition et de retour - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 7
parte di HP. Nel caso di riparazione da parte del cliente, HP HP vornehmen lassen, werden Ihnen die Anfahrt- und Arbeitskosten für diesen Service berechnet. Optional - Teile, für die das Customer Self Repair-Verfahren optional ötigen, können Sie das HP technische Support Center anrufen und sich von - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 8
CSR-Programm in Nordamerika finden Sie auf der HP Website unter (http://www.hp.com/go/selfrepair). Parts-only Warranty Service (Garantieservice ausschließlich für Teile) Ihre HP Garantie umfasst möglicherweise einen Parts-only Warranty Service (Garantieservice ausschließlich für Teile). Gemäß den - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 9
componentes, es obligatoria la sustitución de componentes por parte del usuario (CSR). Si solicita a HP que realice la sustitución de estos componentes, tendrá worden CSR-onderdelen (Customer Self Repair) genoemd. Als HP (of een HP Service Partner) bij de diagnose vaststelt dat de reparatie kan - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 10
voor meer informatie over het Customer Self Repair programma van HP. Informatie over Service Partners vindt u op de HP website (http://www.hp.com/go/selfrepair). Garantieservice "Parts Only" Het is mogelijk dat de HP garantie alleen de garantieservice "Parts Only" omvat. Volgens de bepalingen van de - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 11
No caso desse serviço, a substituição de peças CSR é obrigatória. Se desejar que a HP substitua essas peças, serão cobradas as despesas de transporte e mão-de-obra do serviço. Customer self repair 11 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 12
Customer self repair 12 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 13
Customer self repair 13 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 14
Customer self repair 14 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 15
Customer self repair 15 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 16
Workstation blade components Item 1 2 3 4 5 Description Mechanical components Access panel Hard drive blank Front panel/hard drive cage assembly Hardware and plastics kit a) Heatsink blank b) DIMM baffle c) Battery tray* d) Enclosure connector cover* System components Processors Spare part number - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 17
Item 6 7 Description a) 1.86-GHz Intel® Xeon® E5502 processor** Spare part number 490075-001 b) 2.00-GHz Intel® Xeon® E5504 processor* ** 490074-001 c) 2.13-GHz Intel® Xeon Mandatory1 Mandatory1 Mandatory1 Mandatory1 Mandatory1 Mandatory1 Mandatory1 Mandatory1 Illustrated parts catalog 17 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 18
Item 8 9 10 11 12 13 14 Description Spare part number m) 300-GB, SAS, SFF, 10,000-rpm, dual port, 6G* 507284-001 board Trusted Platform Module* SD card module* Miscellaneous 531225-001 531221-001 505836-001 531227-001 System battery* 234556-001 Ethernet mezzanine* - a) HP NC325m PCI Express - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 19
, you will be charged for the travel and labor costs of this service. 2Optional-Parts for which customer self repair is optional. These parts are also designed for customer self repair. If, however, you require that HP replace them for you, there may or may not be additional charges, depending on - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 20
HP ersetzen lassen, werden Ihnen die Versand- und Arbeitskosten für diesen Service berechnet. 2Optional: Optional-Teile, für die das Customer Self Repair-Verfahren optional para los que la reparación por parte del usuario es obligatoria. Si solicita a HP que realice la sustitución de estos - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 21
Illustrated parts catalog 21 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 22
listed for the workstation blade. 1Mandatory-Parts for which customer self repair is mandatory. If you request HP to replace these parts, you will be charged for the travel and labor costs of this service. 2Optional-Parts for which customer self repair is optional. These parts are also designed for - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 23
HP ersetzen lassen, werden Ihnen die Versand- und Arbeitskosten für diesen Service berechnet. 2Optional: Optional-Teile, für die das Customer Self Repair-Verfahren optional para los que la reparación por parte del usuario es obligatoria. Si solicita a HP que realice la sustitución de estos - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 24
Illustrated parts catalog 24 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 25
damage. CAUTION: When performing non-hot-plug operations, you must power down the workstation blade and/or the system. However, the workstation blade might have to be powered up when performing other operations, such as hot-plug installations or troubleshooting. Removal and replacement procedures 25 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 26
component, power down the workstation blade and remove it from the enclosure. Powering down the workstation blade Before powering down the workstation blade for any upgrade or maintenance procedures, back up critical server data and programs. Depending on the Onboard Administrator configuration, use - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 27
in the event of a hung application. • Use the Onboard Administrator GUI to initiate a shutdown: a. Select the Enclosure Information tab, and then select the Overall checkbox in the Device Bays item. b. Initiate a shutdown from the Virtual Power menu: - Select Momentary Press to initiate a controlled - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 28
damage to electrical components, properly ground the workstation blade before beginning any installation procedure. Improper grounding can cause ESD. Access panel To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade (on page 27). 3. Lift the access panel - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 29
the access panel: 1. Align the anchoring pins on the access panel with the J-slots at the rear of the expansion blade enclosure. 2. Lower the access panel on top of the expansion blade with the latch open. 3. Push down on the access panel latch. The access panel slides to a closed position. Removing - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 30
back and lift it up to remove it from the workstation blade (2). When replacing the graphics expansion blade, reverse the removal procedures. Removing the WS460c Graphics Expansion Blade PCIe card cage To install another graphics card, you must remove the PCI3 card cage from the WS460c Graphics - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 31
the PCIe riser board, noting the location for reinstallation. 3. If you are removing the graphics card from the PCIe card cage, disconnect the power cables from the graphics board. 4. Remove the two Torx-15 screws that secure the front of the PCIe card cage (1). Removal and replacement procedures - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 32
blade enclosure, and then lift the PCIe card cage out of the expansion blade enclosure the following order: a. Configuring the WS460c Graphics Expansion Blade configuration with HBA NOTE: This unique configuration is for users who want to use a single mezzanine card with the graphics expansion blade - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 33
1. Place the host bus adapter (1) into mezzanine slot one, and then tighten the screws (2). 2. Place the expansion cable card (1) into mezzanine slot two, and then tighten the screw (2). Removal and replacement procedures 33 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 34
3. Slide the graphics expansion blade onto the workstation blade. 4. Remove the screws (1), and then remove the PCIe slot card (2) from the graphics expansion blade. Removal and replacement procedures 34 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 35
5. Insert the graphic card into PCIe slot one. 6. Replace the graphic card fan cover. Removal and replacement procedures 35 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 36
7. Locate the dipswitch on the left side of the PCIe slot card, and then flip switch 2 to ON. 8. Replace the PCIe slot card on the graphics expansion blade (1), and then tighten the screws (2). Removal and replacement procedures 36 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 37
9. Insert the graphic card power cable. 10. Insert cables into the graphic expansion cable mezzanine card. Removal and replacement procedures 37 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 38
11. Insert cable 4 to slot 2 (1), and then insert cable 3 to slot 1 (2). 12. Slide the cover onto graphic expansion blade. Removal and replacement procedures 38 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 39
drive IMPORTANT: Hot-plug capability and drive LED support are only available when a supported optional controller is installed in the server. To remove the component: 1. Back up all data on the hard drive. 2. Power down the workstation blade. CAUTION: To prevent improper cooling and thermal damage - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 40
and drive LEDs. • Optional SAS controllers support hot-plug SAS or SATA hard drives and drive LEDs. NOTE: ACU does not support mixing SAS and SATA drives in the same logical volume. Battery tray To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade (on page 27 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 41
battery tray. To replace the component, reverse the removal procedure. Mezzanine connector cover To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade (on page 27). 3. Remove the access panel ("Access panel" on page 28). 4. Remove the mezzanine connector cover - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 42
access panel ("Removing the WS460c Graphics Expansion Blade access panel" on page 29) and blade ("Removing the WS460c Graphics Expansion Blade access panel" on page 29). To install a DIMM: 1. Power down the server. 2. Remove the workstation blade (on page 27). 3. Remove the access panel ("Access - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 43
If you are installing DIMMs in a mirrored or lock-step configuration, configure this mode in RBSU. If necessary, reinstall the WS460c Graphics Expansion Blade and the access panel. Heatsink blank To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade (on page - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 44
to secure it to the workstation blade. When installing a mezzanine card in this workstation blade, only two captive screws are required. To remove the component: 1. Power down the workstation blade. 2. Choose one of the following options: o Remove the workstation blade (on page 27). o If you are - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 45
of the following options: o Install the workstation blade. o If you are using the WS460c G6 Workstation Blade with WS460c Graphics Expansion Blade, install the graphics expansion blade, the graphics access panel, and the blade assembly. Hard drive backplane To remove the component: 1. Power down the - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 46
blanks ("Hard drive blank" on page 39). 4. Install the access panel ("Access panel" on page 28). 5. Install the workstation blade. Front panel/hard drive cage assembly To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade (on page 27). Removal and replacement - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 47
the BBWC option: • Removal and replacement of failed components: o Removing the cache module (on module. Detaching the cable causes any unsaved data in the cache module to be lost. Removing the cache module To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 48
. CAUTION: To prevent damage to the cache module during installation, be sure the cache module is fully inserted before pressing down. Removing the battery pack To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade (on page 27). 3. Remove the access panel - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 49
electrostatic discharge" on page 25). 1. Perform one of the following: o Set up a recovery workstation blade station using an identical workstation blade model. Do not install any internal drives or BBWC in this workstation blade. (HP recommends this option.) Removal and replacement procedures 49 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 50
pack ("Removing the battery pack" on page 48) from the failed workstation blade, and install the controller, cache module, and battery pack in the recovery workstation blade. 5. Power up the recovery workstation blade. A 1759 POST message is displayed, stating that valid data was flushed from - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 51
card module. To replace the component, reverse the removal procedure. Heatsink WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them. To remove the component: 1. Power down the workstation blade. 2. Remove - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 52
cover from the heatsink. CAUTION: To avoid damage to the system board, processor socket, and screws, do not overtighten the heatsink screws. Use the wrench supplied with the system to reduce the possibility of overtightening the screws. Removal and replacement procedures 52 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 53
Update the system ROM. Locate and download the latest ROM version from the HP website (http://www.hp.com/support). Follow the instructions on the website to update the system ROM. 2. Power down the workstation blade. 3. Remove the workstation blade (on page 27). Removal and replacement procedures 53 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 54
4. Remove the access panel ("Access panel" on page 28). 5. Remove all hard drives ("Hard drive" on page 39). 6. Remove all hard drive blanks ("Hard drive blank" on page 39). 7. Remove the hard drive backplane ("Hard drive backplane" on page 45). 8. Remove the front panel/hard drive cage assembly (" - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 55
, processor socket, and screws, do not overtighten the heatsink screws. Use the wrench supplied with the system to reduce the possibility of overtightening the screws. 1. Carefully insert the processor into the processor installation tool. Handle the processor by the edges only, and do not touch the - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 56
: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the system board: • Never install or remove a processor without using the processor installation tool. • Do not touch the processor socket contacts. • Do not tilt or slide the processor when lowering the processor - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 57
3. Press and hold the tabs on the processor installation tool to separate it from the processor, and then remove the socket, and screws, do not overtighten the heatsink screws. Use the wrench supplied with the system to reduce the possibility of overtightening the screws. Removal and replacement procedures - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 58
hard drive blanks ("Hard drive blank" on page 39). 10. Install the access panel ("Access panel" on page 28). 11. Install the workstation blade. System board To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade (on page 27). 3. Remove the access panel ("Access - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 59
11. Open the processor locking lever and the processor socket retaining bracket. 12. Using the processor tool, remove the processor from the system board: a. Line up the processor tool, ensuring the locking lever graphic on the tool is oriented correctly. b. Press in on the plastic tabs, and then - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 60
13. Carefully rotate the tool, and then push in and release the tabs to secure the processor in the tool. CAUTION: To avoid damage to the processor, do not touch the bottom of the processor, especially the contact area. 14. Remove the system board assembly. Removal and replacement procedures 60 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 61
To replace the system board: 1. Install the spare system board. CAUTION: Failure to completely open the processor locking lever prevents the processor from seating during installation, leading to hardware damage. 2. Open the processor locking lever and the processor socket retaining bracket. Do not - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 62
3. If the processor has separated from the installation tool, carefully re-insert the processor in the tool. Handle the processor by the edges only, and do not touch the bottom of the processor, especially the contact area. Removal and replacement procedures 62 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 63
: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the system board: • Never install or remove a processor without using the processor installation tool. • Do not touch the processor socket contacts. • Do not tilt or slide the processor when lowering the processor - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 64
lever. The lever should close without resistance. Forcing the lever closed can damage the processor and socket, requiring system board replacement. 7. Install the processor socket cover onto the processor socket of the failed system board. 8. Clean the old thermal grease from the heatsink and the - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 65
. Install the workstation blade. After you replace the system board, you must re-enter the workstation blade serial number and the product ID. 1. During the workstation blade startup sequence, press the F9 key to access RBSU. 2. Select the Advanced Options menu. 3. Select Service Options. 4. Select - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 66
9. Press the Esc key to close the menu. 10. Press the Esc key to exit RBSU. 11. Press the F10 key to confirm exiting RBSU. The workstation blade automatically reboots. Removal and replacement procedures 66 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 67
must remove any previously installed WS460c Graphics Expansion Blade access panel ("Removing the WS460c Graphics Expansion Blade access panel" on page 29) and the blade ("Removing the WS460c Graphics Expansion Blade access panel" on page 29). To remove the component: 1. Power down the workstation - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 68
system board battery resets the system ROM to its default configuration. After replacing the battery, reconfigure the system through RBSU. an authorized service provider. Workstation blade release lever To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade (on - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 69
release lever. To replace the component, reverse the removal procedure. Release button To remove the component: 1. Power down the workstation blade. 2. Remove the workstation blade (on page 27). 3. Remove the access panel ("Access panel" on page 28). 4. Remove all hard drives ("Hard drive" on page - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 70
removal procedure. HP Trusted Platform Module The TPM is not a customer-removable part. CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 71
, issue resolution, and software maintenance on ProLiant servers and server blades. This guide includes problem-specific flowcharts to help you navigate complex troubleshooting processes. To view the guide, select a language: • English (http://www.hp.com/support/ProLiant_TSG_en) • French (http://www - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 72
SmartStart-assisted HP Insight Diagnostics installation, or it can be installed through the HP PSP. NOTE: The current version of SmartStart provides the memory spare part numbers for the workstation blade. To download the latest version, see the HP website (http://www.hp.com/support). Integrated - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 73
software provides comprehensive remote monitoring and proactive service support for nearly all HP servers, storage, network, and SAN environments, plus selected non-HP servers that have a support obligation with HP. It is integrated with HP Systems Insight Manager. A dedicated server is recommended - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 74
External USB functionality HP provides external USB support to enable local connection of USB devices for workstation blade administration, configuration, and diagnostic procedures. For more information, see "Using the HP c-Class Blade SUV Cable (on page 75)." For additional security, external USB - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 75
• Cache module cabling: Use the 24-inch BBWC battery pack cable. • Mezzanine card cabling: Use the 11.5-inch BBWC battery pack cable. Using the HP c-Class Blade SUV Cable The HP c-Class Blade SUV Cable enables the user to perform workstation blade administration, configuration, and diagnostic - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 76
drive • USB diskette drive Access can be configured in several ways. This section offers two possible configurations. For more information, see "USB support and functionality (on page 73)." Accessing a workstation blade with local KVM For this configuration, a USB hub is not necessary. To connect - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 77
1. Connect the HP c-Class Blade SUV cable to the workstation blade. 2. Connect the video connector to a monitor. 3. Connect a USB hub to one USB connector. 4. 3 4 5 6 Description Monitor USB CD/DVD-ROM drive or diskette drive USB keyboard USB hub USB mouse HP c-Class Blade SUV Cable Cabling 77 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 78
SUV connector* Serial label pull tab Release button Workstation blade release lever Power On/Standby button Hard drive bay 1 Hard drive bay 2 *The SUV connector and the HP c-Class Blade SUV Cable are for some workstation blade configuration and diagnostic procedures. Component identification 78 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 79
Front panel components for workstation blade with graphics expander blade Item 1 2 3 4 5 6 Description Serial label pull tab SUV connector Hard drive bay 1 Release button Server blade release lever Hard drive bay 2 Component identification 79 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 80
condition Red = Critical condition Green = Network linked Green flashing = Network activity Off = No link or activity Green = Network linked Green flashing = Network activity Off = No link or activity - Green = On Amber = Standby (auxiliary power available) Off = Off Component identification 80 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 81
condition Red = Critical condition Green = Network linked Green flashing = Network activity Off = No link or activity Green = Network linked Green flashing = Network activity Off = No link or activity - Green = On Amber = Standby (auxiliary power available) Blue = Identified BLue flashing = Active - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 82
but it is not active currently. Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is part of an array that is undergoing capacity expansion or stripe migration, but a predictive failure alert has been received for this drive. To minimize the - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 83
drive is offline, a spare, or not configured as part of an array. System module connector The symbols correspond to the symbols located on the interconnect bays. For more information, see the HP ProLiant WS460c G6 Workstation Blade with WS460c Graphics Expansion Blade Installation Instructions - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 84
DIMM slot locations DIMM slots are numbered sequentially (1 through 6) for each processor. The supported AMP modes use the letter assignments for population guidelines. DIMM identification To determine DIMM characteristics, use the label attached to the DIMM and the following - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 85
supported memory information, see the QuickSpecs on the HP website (http://www.hp.com supports x8 cards at up to x4 speeds. A PCIe x8 mezzanine connector supports x16 cards at up to x8 speeds. System maintenance switch Position Function Default 1* iLO 2 security override Off 2 Configuration - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 86
HP c-Class Blade SUV Cable Item 1 2 3 4 Connector Workstation blade Video USB Serial Description For connecting to the SUV connector on the workstation blade front panel For connecting a video monitor For connecting up to two USB devices For trained personnel to connect a null modem serial cable - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 87
is allowed. -The maximum permissible rate of change is 10°C/hr (18°F/hr). - The type and number of options installed may reduce the upper temperature and humidity limits. - Operating with a fan fault or above 30°C (86°F) may reduce system performance. ** Storage maximum humidity of 95% is based on - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 88
Self Repair ESD electrostatic discharge FC Fibre Channel HBA host bus adapter HCA Host Channel Adapter HP SIM HP Systems Insight Manager iLO 2 Integrated Lights-Out 2 IML Integrated Management Log PCIe peripheral component interconnect express PSP ProLiant Support Pack Acronyms and abbreviations 88 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 89
RBSU ROM-Based Setup Utility ROM read-only memory SAS serial attached SCSI SATA serial ATA SFF small form-factor SIM Systems Insight Manager SUV serial, USB, video TPM trusted platform module UID unit identification USB universal serial bus Acronyms and abbreviations 89 - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 90
cache) 46 BBWC battery pack cabling 74 buttons 77 C cables 74 cabling 74 cache module, removing 47 cautions 25 components 16, 25, 28, 69, 77, 78 components, identification 77, 80 configuring graphics expansion blade with HBA 32 connectors 77 CSR (customer self repair) 5 customer self repair (CSR - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 91
system components 77 system maintenance switch 81, 84 Systems Insight Manager 71 T tools 25, 70 Torx screwdriver 25 TPM (Trusted Platform Module) 69 troubleshooting 70 troubleshooting resources 70 Trusted Platform Module (TPM) 69 U USB connectors 84 USB devices 74 USB support 72 utilities 70 V video - HP BladeSystem c3000 | HP ProLiant WS460c G6 Workstation Blade with WS460c Graph - Page 92
video devices 74 W warnings 25 warranty 5 Index 92
HP ProLiant WS460c G6 Workstation Blade with
WS460c Graphics Expansion Blade
Maintenance and Service Guide
Abstract
This guide provides maintenance and service information for the HP ProLiant WS460c G6 Workstation Blade with WS460c Graphics Expansion
Blade. This guide is for technicians that service computer equipment, recognize hazards in products with hazardous energy levels, and understand
weight and stability precautions for rack installations.
Part Number: 582470-006
February 2011
Edition: 6