HP BladeSystem c7000 Pass-Thru Installation Instructions for HP c-Class BladeS
HP BladeSystem c7000 Manual
 |
View all HP BladeSystem c7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP BladeSystem c7000 manual content summary:
- HP BladeSystem c7000 | Pass-Thru Installation Instructions for HP c-Class BladeS - Page 1
to install the interconnect modules. See the HP BladeSystem Onboard Administrator User Guide for specific Pass-Thru port connections for each blade. Connections differ by blade type. The information in this guide is needed to understand cabling between the Pass-Thru module and the network switches - HP BladeSystem c7000 | Pass-Thru Installation Instructions for HP c-Class BladeS - Page 2
or performance of procedures other than those specified herein or in the laser product's installation guide may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation: • Do not try to open the module enclosure. There are no user-serviceable components inside
-
1 -
2
 |
 |
Pass-Thru
Installation Instructions
for HP c-Class BladeSystem
Overview
This card provides procedures for installing a 1Gb Ethernet Pass-Thru
Module or a 16 Port 4Gb FC Pass-Thru Module in a c-Class server
blade enclosure.
Kit contents
The kit contents include one of the following Pass-Thru modules:
•
HP 1Gb Ethernet Pass-Thru Module
•
HP 16 Port 4Gb FC Pass-Thru Module (with SFP modules
installed)
HP 1Gb Ethernet Pass-Thru Module
HP 16 Port 4Gb FC Pass-Thru Module (with
SFP modules installed)
Additional information
See the HP BladeSystem enclosure setup and installation guide or HP
BladeSystem enclosure installation poster that ships with your
enclosure for more information on the association between the
mezzanine bay and the interconnect bays. Where you install the
mezzanine card will determine where you need to install the
interconnect modules.
See the
HP BladeSystem Onboard Administrator User Guide
for
specific Pass-Thru port connections for each blade. Connections differ
by blade type. The information in this guide is needed to understand
cabling between the Pass-Thru module and the network switches.
The Onboard Administrator screen example is a helpful reference for
port mapping.
Pass-Thru connection and LED
identification
NOTE:
See the HP BladeSystem enclosure setup and
installation guide for more information on the BladeSystem
port mapping.
Item
Description
1
HP 1Gb Ethernet Pass-Thru Module for HP c-Class
BladeSystem
2
HP 16 Port 4Gb FC Pass-Thru Module for HP
c-Class BladeSystem
Pass-Thru LED definitions
UID (1) blue
Interpretation
On
Activated
Off
Deactivated
Internal health LED color (2)
Interpretation
Off
Normal (power off)
Green
Normal (power on)
Amber
Problem (a fault exists)
Fibre channel link/Port ID (3)
Interpretation
On
Link
Flashing
Port ID
Ethernet activity (4) green
Interpretation
Flashing
1000 activity
Off
No activity
Ethernet link/Port ID (5) amber
Interpretation
Flashing
1000 link/Port ID
On
1000 link
Off
No link
Installing a Pass-Thru
NOTE:
The Pass-Thru may look different from that shown.
© Copyright 2006, 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard
Company under license.
Part Number: 413280-002
June 2011
Edition: 2
*413280-002*
413280-002