HP C7745NB HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen
HP C7745NB - SureStore DLT Tape Autoloader 1/9 Manual
![]() |
View all HP C7745NB manuals
Add to My Manuals
Save this manual to your list of manuals |
HP C7745NB manual content summary:
- HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 1
Tape Autoloader Model 1/9 Upgrade and Parts Replacement Guide Edition 2 Manufacturing Part Number: C7145-90021 November 2000 Printed in USA - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 2
New editions of this manual incorporate all material updated since the previous edition. The manual printing date and part number printing Edition 2 C7145-90021: November 2000: Second printing - This Guide includes the following additions: 1) Autoloader Features 2) Installing the Autoloader into - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 3
could damage the product if not correctly performed. Do not proceed until you understand and meet these required conditions. Notes explain significant concepts or operating instructions. Tips provide hints or shortcuts for a procedure. iii - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 4
In This Manual Chapter 1 Chapter 2 Chapter 3 Chapter 4 Overview and Preparation for Upgrade: Describes the autoloader features and how to prepare the autoloader for upgrade. Upgrading the Autoloader: Describes - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 5
Contents 1. Overview and Preparation for Upgrade Chapter Overview 1-2 Autoloader Features 1-3 Front and Back Panel Overview 1-3 Removing a Rackmounted Autoloader (if necessary 1-4 Removing the Autoloader from a Rack 1-5 Removing the Trim Bracket and Filler Panel 1-6 Removing the Standalone - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 6
Mounted in a Rack 3-10 4. Upgrading Firmware Chapter Overview 4-2 Upgrading Firmware 4-3 Checking the Firmware Revision 4-3 Using the Optional Remote Management Card 4-4 Using CE Diagnostic Tools (For Service Personnel 4-5 Using a Firmware Upgrade Tape (Drive Firmware Only 4-7 ii - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 7
Figures Figure 1-1. Front and Back Panel 1-3 Figure 1-2. Removing the Autoloader 1-5 Figure 1-3. Removing the Trim Bracket and Filler Panel 1-6 Figure 1-4. Removing the Standalone Cosmetic Cover 1-7 Figure 2-1. Installing a Remote Management Card 2-5 Figure 2-2. Removing the Front Magazine 2- - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 8
Figures iv - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 9
Tables Table 2-1. Supported Browser Configurations 2-4 v - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 10
Tables vi - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 11
Overview&Preparation 1 Overview and Preparation for Upgrade Chapter 1 1-1 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 12
Overview and Preparation for Upgrade Chapter Overview Chapter Overview This chapter describes the following: • Autoloader features • Removing a rackmounted autoloader • Removing the trim bracket and filler panel • Removing the standalone cosmetic cover 1-2 Chapter 1 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 13
Figure 1-1 Overview and Preparation for Upgrade Autoloader Features Autoloader Features Front and Back Panel Overview Overview&Preparation Front and Back Panel 1 Door handle 2 Power (standby) switch 3 Front panel display 4 Soft-button keys 5 Slot for pull-out information tab 6 LED - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 14
Overview and Preparation for Upgrade Removing a Rackmounted Autoloader (if necessary) WARNING Removing a Rackmounted Autoloader (if necessary) Before you remove the autoloader from a rack, lower the rack's leveler feet, and extend the rack's anti-tip device. Failure to extend the anti-tip device - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 15
Overview and Preparation for Upgrade Removing a Rackmounted Autoloader (if necessary) ADVERTENCIA Antes de empezar, baje las patas de nivelación del bastidor y abra el dispositivo estabilizador del mismo. En caso de no abrir el dispositivo estabilizador, existe el peligro de que se produzcan - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 16
following: 1. Remove the trim bracket from the right side of the autoloader by lifting up gently on the bracket until it separates from the autoloader. Guide pins keep the bracket in place (see Figure 1-3). 2. Remove the filler panel or trim bracket from the left side by gently lifting up on the - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 17
CAUTION Figure 1-4 Overview and Preparation for Upgrade Removing a Rackmounted Autoloader (if necessary) Removing the Standalone Cosmetic Cover If the autoloader is not rackmounted and has a cosmetic cover, to remove the cover, do the following: Overview&Preparation This autoloader contains very - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 18
Overview and Preparation for Upgrade Removing a Rackmounted Autoloader (if necessary) 1-8 Chapter 1 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 19
UpgradingtheAutoloader 2 Upgrading the Autoloader Chapter 2 2-1 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 20
Upgrading the Autoloader Chapter Overview Chapter Overview This chapter describes the following: • Remote management via the remote management card • Upgrading the autoloader from DLT to Ultrium 2-2 Chapter 2 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 21
CAUTION Upgrading the Autoloader Web Monitoring Web Monitoring This autoloader contains very sensitive electronic components. It is important to prevent electrostatic discharge (ESD). Use wrist grounding UpgradingtheAutoloader straps and anti-static mats when removing and replacing cards and - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 22
higher, Netscape Communicator™ 4.5 and higher, and Netscape Navigator™ 4.08 and higher. • HP-UX: Netscape Communicator™ 4.5 and higher and Netscape Navigator™ 4.08 and higher. Internet Explorer™ is not supported. • Sun Solaris: Netscape Communicator™ 4.5 and higher and Netscape Navigator™ 4.08 and - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 23
The card fits between the top and bottom tracks (see Figure 2-1). 4. Gently slide the RMC in, ensuring that it remains aligned with the recessed guide tracks. There may be some resistance as the RMC connector engages with the connector on the autoloader. 5. Tighten the two thumbscrews on the RMC to - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 24
your front panel, and the RMC may not operate properly. See the Autoloader User Manual for more information on partial availability. Configuring the Remote Management Card A category 5 Ethernet cable supports a 10/100 BaseT Ethernet connection. 1. Install one end of a category 5 Ethernet cable into - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 25
you if the changes have not been saved. 10. Enter the designated IP address into the web browser to launch the browser. Example 1 - All modes (Manual configuration, DHCP, or BOOTP): IP address = 15.28.33.12 http://15.28.33.12 Example 2 - With a DNS server present: Device name = library1 http - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 26
NOTE NOTE Upgrading the Autoloader Web Monitoring Instructions and online help screens describing remote management are available from the Web-Based Library Administrator pages by selecting the [?] button at the top right-hand - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 27
NOTE Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium Upgrading the Autoloader from DLT to Ultrium UpgradingtheAutoloader This section is applicable for upgrading from DLT and DLT1 to Ultrium. Replacing a Digital Linear Tape (DLT) drive to the Ultrium drive includes the - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 28
NOTE Figure 2-2 Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium Removing the Front Magazine By running the Back Magazine Removal test from the front panel before powering-off the autoloader, the transport is placed in the correct position to allow removal of the back magazine. - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 29
CAUTION Figure 2-3 Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium Removing the DLT Drive Module This autoloader contains very sensitive electronic components. It is important to prevent electrostatic discharge (ESD). Use wrist grounding straps and anti-static mats when - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 30
Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium CAUTION Figure 2-4 As the drive module is pulled out, support the bottom of the drive module to avoid dropping or damaging it. 3. Using the handle mounted on the back of the drive module, pull the - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 31
CAUTION NOTE Figure 2-5 Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium Removing the Back Magazine Use standard precautions for electro-static discharge (ESD) protection. UpgradingtheAutoloader Running the Back Magazine Removal test from the front panel before powering-off - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 32
Figure 2-6 Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium 3. The back magazine will be visible in the opening (see Figure 2-5 on page 2-13). 4. Through the side access opening, carefully reach into the autoloader and hold the back magazine in place while removing the T-15 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 33
Figure 2-7 Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium Tab and Track Locations UpgradingtheAutoloader Chapter 2 2-15 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 34
lower metal tracks on the right side of the autoloader. When aligned, the magazine will slide into place (see Figure 2-7 on page 2-15). 3. While supporting the magazine, replace the T-15 screw to secure the magazine in place (see Figure 2-6 on page 2-14). 4. Replace the side panel (see Figure 2-5 on - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 35
Figure 2-8 Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium Installing a Ultrium Drive Module UpgradingtheAutoloader Chapter 2 2-17 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 36
Autoloader from DLT to Ultrium Installing the Front Ultrium Magazine 1. Open the front door of the autoloader. 2. To install the Ultrium front magazine, guide the magazine into the right side of the autoloader until it "clicks" into place (see Figure 2-9). 3. Close the door. 4. Re-connect the power - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 37
Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium Bringing the Drive Online To bring the drive online, do the following: 1. Enter the Administration, then the Online Drive Repair menus. 2. Select [Put drive online] to bring the drive back online. The autoloader - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 38
Upgrading the Autoloader Upgrading the Autoloader from DLT to Ultrium 2-20 Chapter 2 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 39
ReplacingParts 3 Replacing Autoloader Parts Chapter 3 3-1 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 40
Replacing Autoloader Parts Chapter Overview Chapter Overview This chapter describes the following: • Removing and installing drive modules • Returning the autoloader 3-2 Chapter 3 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 41
powered-on to replace the drive, proceed to "Removing the Drive Module" on page 3-4. Only take the drive offline if the host backup software supports online drive repair. To take the drive offline when the autoloader is powered-on: 1. Take the drive offline by going to the Administration and then - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 42
NOTE CAUTION Figure 3-1 Replacing Autoloader Parts Removing and Installing Drive Modules Removing the Drive Module To preserve SCSI communications, do not loosen or remove the SCSI cable(s) connected to the outside of the drive module. The connection to be removed is located inside the drive module - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 43
the back of the drive module, pull the drive module straight out with one hand while supporting the bottom of the drive module with the other hand. As the drive module is pulled out, support the bottom of the drive module to avoid dropping or damaging it. Removing a Drive Module ReplacingParts - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 44
Parts Removing and Installing Drive Modules Installing a Drive Module 1. Hold the drive module with one hand on the drive module handle while the other hand supports the drive (see Figure 3-3). 2. Install the drive module by inserting the rail at the top of the drive module into the slot at the top - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 45
NOTE Replacing Autoloader Parts Removing and Installing Drive Modules 3. Tighten the top and bottom thumbscrews by hand, securing the drive module into the autoloader. 4. Plug the ribbon connector into the back of the drive module (see Figure 3-1 on page 3-4). 5. Gently fold the ribbon cable that - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 46
Replacing Autoloader Parts Returning the Autoloader Returning the Autoloader 1. Verify that the drive is empty. 2. If the drive contains a tape, unload it. Refer to the backup software documentation, or access the following menu path from the front panel.. Operations -> Drive and Tape Operations -> - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 47
Figure 3-4 Replacing Autoloader Parts Returning the Autoloader 5. To prevent damage, lock the transport by running the Lock Transport front panel test. Removing the Front Magazine NOTE CAUTION ReplacingParts Be sure to also remove the tapes from the internal back magazine. Do not power-off the - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 48
WARNING Replacing Autoloader Parts Returning the Autoloader For Autoloaders Mounted in a Rack Before you remove the autoloader from a rack, lower the rack's leveler feet, and extend the rack's anti-tip device. Failure to extend the anti-tip device could result in personal injury or damage to the - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 49
mechanical lift, remove the autoloader from the rack tray by sliding it out and supporting it from the bottom. 4. Place the autoloader on a solid surface to prepare it you need ReplacingParts packaging, contact your service representative to purchase the packaging kit. Internal Packaging Chapter 3 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 50
Replacing Autoloader Parts Returning the Autoloader 3-12 Chapter 3 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 51
4 Upgrading Firmware UpgradingFirmware Chapter 4 4-1 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 52
Chapter Overview Chapter Overview This chapter describes the following: • Upgrading firmware • Checking firmware revisions • Using the optional remote management card • Using CE diagnostic tools (for service personnel) • Using a firmware upgrade tape for drive firmware only 4-2 Chapter 4 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 53
Before downloading new firmware, check your current firmware revisions and compare them to the latest available revisions at www.hp.com/go/support, or contact your support provider. If the autoloader is in a partial availability state (solid amber LED) due to a firmware mismatch, download new - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 54
firmware, except drive firmware, can be easily downloaded from the remote management card. The firmware files are available at www.hp.com/go/support, or contact your support provier. These files must be loaded on the local host computer before downloading firmware. First select your product, and - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 55
. The firmware download may take several minutes to complete. Using CE Diagnostic Tools (For Service Personnel) You can use Library and Tape Tools (http://www.hp.com/support/tape tools) or third-party service tools to update autoloader and drive firmware from a laptop computer. When using a narrow - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 56
that the drive is online (green LED is on and yellow LED is off). If not, place it online through the front panel. a. Enter the Service then the Online Drive Repair menus. b. Select [Put Drive Online]. The autoloader will automatically run a self-test when the drive has been brought online. Wait - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 57
Upgrading Firmware Upgrading Firmware Using a Firmware Upgrade Tape (Drive Firmware Only) 1. Call your service representative to get the drive upgrade tape. 2. Ensure that you have removed all tapes from the drive. If a tape is in the drive, use the - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 58
Upgrading Firmware Upgrading Firmware 4-8 Chapter 4 - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 59
Transfer Mode D differential SCSI A type of SCSI cable that can go a maximum of 25 meters. F fabric Fibre Channel-defined interconnection methodology that supports high-speed data routing in Fibre Channel networks. FC-AL An acronym for Fibre Channel Arbitrated Loop topology. FC-SW An acronym for - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 60
HIPPI High-Performance Parallel Interface I IP Internet Protocol L Local Area Network (LAN) A communications system with dimensions that are typically less than 5 kilometers. Transmissions within a local area network are mostly digital, carrying data among stations at rates usually above one megabit - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 61
S SCSI Small Computer Standard Interface single-ended SCSI A type of cable that is limited to short distances because of the way the electronic signals move down the length of the cable. SW Optical GBIC Short Wave Optical Gigabit Interface Converter SW Optical FC Cable Short wave optical Fibre - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 62
4-Glossary - HP C7745NB | HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacemen - Page 63
, 2-13 removing DLT drive module, 2-11 removing front magazine, 2-10 tab locations, 2-15 transport placement, 2-13 unloading a tape, 2-9 upgrading firmware, 2-9 W web monitoring, 2-3 BOOTP, 2-4 DHCP, 2-3 RMC, 2-3 supported browser config, 2-4 wide SCSI, Glossary-3 Index 1
![](/manual_guide/products/hewlettpackard-c7745nb-hp-surestore-tape-autoloader-model-19-upgrade-parts-replacement-guide-d379404/1.png)
Tape Autoloader
Model 1/9
Upgrade and Parts Replacement Guide
Edition 2
Manufacturing Part Number: C7145-90021
November 2000
Printed in USA