HP Cluster Platform Hardware Kits v2010 c-Class Blade Cable Management Bracket
HP Cluster Platform Hardware Kits v2010 Manual
View all HP Cluster Platform Hardware Kits v2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Cluster Platform Hardware Kits v2010 manual content summary:
- HP Cluster Platform Hardware Kits v2010 | c-Class Blade Cable Management Bracket - Page 1
HP Cluster Platform c-Class Blade Cable Management Bracket Installation Guide *5991-6764* Printed in the US HP Part Number: 5991-6764 Published: October 2006 - HP Cluster Platform Hardware Kits v2010 | c-Class Blade Cable Management Bracket - Page 2
contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable - HP Cluster Platform Hardware Kits v2010 | c-Class Blade Cable Management Bracket - Page 3
1 Preparing for Installation Audience This guide is intended for HP service representatives and other persons trained to com/en/highperfcomp.html Kit Description The c-Class Blade cable management bracket aligns and supports cables that lead from a 4x DDR IB (InfiniBand) Switch Module mounted in - HP Cluster Platform Hardware Kits v2010 | c-Class Blade Cable Management Bracket - Page 4
know how to plug in the InfiniBand cables, as described in see the HP Cluster Platform InfiniBand Interconnect Installation and User's Guide. • Read the rack installation instructions for the c-Class blade enclosure. • Obtain the set of cabling tables required for your HP Cluster Platform solution - HP Cluster Platform Hardware Kits v2010 | c-Class Blade Cable Management Bracket - Page 5
2 Aligning the Bracket Figure 2-1 "Bracket Orientation" shows the correct orientation of the cable management bracket which you must install before connecting the cables to the InfiniBand switch module. During the cabling procedure, the bracket provides strain relief for the InfiniBand ports, and - HP Cluster Platform Hardware Kits v2010 | c-Class Blade Cable Management Bracket - Page 6
Table 2-1 Bracket Mount Locations InfiniBand Switch Module Bay Relative U Location Bracket Hook Cut-out Bay 3 and 4. 4th U down from the top of the Top cutout. blades enclosure. Bay 5 and 6. 4th U down from the top of the Bottom cutout. blades enclosure. Bay 7 and 8. 5th U down from the top - HP Cluster Platform Hardware Kits v2010 | c-Class Blade Cable Management Bracket - Page 7
secure it at the front of the rack as specified in the installation instructions for the blade enclosure. 6. Starting at the lowest port and working up 2 in Figure 3-1. 10. Route the cable to its next point of support, as defined by the cable management solution for blades clusters. 11. Repeat - HP Cluster Platform Hardware Kits v2010 | c-Class Blade Cable Management Bracket - Page 8
to dismantle or remove the bracket in order to perform any service operations on the blades enclosure, such as replacing InfiniBand switch that the cables remain within their specified bend radius while they are not supported by the bracket. 3. Remove the two M6 screws that secure the bracket
HP Cluster Platform
c–Class Blade Cable Management Bracket
Installation Guide
*5991-6764*
Printed in the US
HP Part Number: 5991-6764
Published: October 2006