HP D2D4009fc HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B
HP D2D4009fc Manual
View all HP D2D4009fc manuals
Add to My Manuals
Save this manual to your list of manuals |
HP D2D4009fc manual content summary:
- HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 1
Upgrade Kit Installation Instructions Abstract This document explains how to install the HP StoreOnce 4210, 4220/4420 and 4430 Upgrade Kits, apply the new licenses, and add the new storage to the existing system. It is intended for system administrators familiar with the HP StoreOnce Backup systems - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 3
the Capacity Upgrade 4 Overview of the Upgrade Process 4 Front and Rear Views of the Upgrade Kit 5 2 Installing and Connecting the Upgrade Kit 6 Installing the Rails...6 Installing the Upgrade Kit...6 Connecting the Upgrade Kit to the HP StoreOnce Backup System 7 HP StoreOnce 4220/4210 Backup - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 4
has upgrade kits installed. • HP StoreOnce 4210 Upgrade Kit: Contains an enclosure with 12 x 1 TB disks and one cable, and is for use with the HP StoreOnce 4210 Backup system. NOTE: For HP StoreOnce 4210 Backup systems, the configured available disk capacity of the Upgrade Kit is approximately - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 5
• Prepare for expansion • Add storage to the HP StoreOnce Backup system IMPORTANT: When connecting multiple upgrade kits to an HP StoreOnce 4430/4420 Backup system, you must add all licenses before expanding the capacity of the HP StoreOnce Backup system. The storage expansion process will fail if - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 6
2 Installing and Connecting the Upgrade Kit Installing the Rails The Upgrade Kit should be installed directly below or above the HP StoreOnce Backup system. The HP 2U Rack Rail Kit installation instructions (shipped with the rail kit) details the process of racking a disk enclosure. Sections include - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 7
a bracket that must engage the device chassis to secure the rear of the chassis to the rails. Connecting the Upgrade Kit to the HP StoreOnce Backup System HP StoreOnce 4220/4210 Backup Systems 1. To ensure correct keying, first connect the supplied cable to the P1 connector on the top I/O module - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 8
of each cable to the connector on the RAID card. HP StoreOnce 4430 Backup system WARNING! Daisy-chaining Upgrade Kits is not supported. Each Upgrade Kit must be directly connected to one of the RAID cards on the HP StoreOnce Backup system. Each kit is supplied with two cables; the longer cable is - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 9
. It does not matter which connectors are used, but only three expansion shelves may be connected. Figure 5 Cabling the Upgrade Kit to the HP StoreOnce 4420 Backup system 1. Power connectors 3. Power on/off button 2. P1 connector (on I/O-A) 4. Port connector on RAID card 3. Use the supplied power - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 10
an Administrator user name: ssh @ At the next prompt, enter the Administrator's password. IMPORTANT: When connecting multiple upgrade kits to an HP StoreOnce 4430/4420 Backup system, you must add all licenses before expanding the capacity of the HP StoreOnce Backup system. The - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 11
it from the HP Licensing website. Entering the LTU manually is not advised. 4. The key is specific to the HP StoreOnce Backup system to which it applies. It cannot be transferred. Completing the RAID Expansion NOTE: HP 4430 and 4420 Backup systems only: All Upgrade Kits that have been licensed - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 12
4. Monitor the expansion using the following command: hardware show storage status (or its alias, system show status) This command will return either of the following after an add command has been sent: • Adding X,XXXGB... • Formatted XXGB Using the Hardware Tree to Monitor Progress At any point - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 13
show problems command to list any enclosures with unconfigured storage. You can also use the hardware show storage status command for a textural view of the storage configured. See the HP StoreOnce Backup System CLI Reference Guide for more information on using these CLI commands. Troubleshooting - HP D2D4009fc | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity Upgrade B - Page 14
The hardware add storage command will fail if: • There is an outstanding prepare or add command in progress. • Any of the error conditions described above for the hardware prepare storage command have not been rectified. 14 Applying the License and Completing the RAID Expansion
HP StoreOnce 4210, 4220/4420 and
4430 Upgrade Kit
Installation Instructions
Abstract
This document explains how to install the HP StoreOnce 4210, 4220/4420 and 4430 Upgrade Kits, apply the new licenses,
and add the new storage to the existing system. It is intended for system administrators familiar with the HP StoreOnce Backup
systems.
*BB864-90901*
HP Part Number: BB864-90901
Published: October 2012
Edition: 1