HP D5970A How to perform unattended NOS installation Using HP Toptools Remote
HP D5970A - NetServer - LCII Manual
![]() |
View all HP D5970A manuals
Add to My Manuals
Save this manual to your list of manuals |
HP D5970A manual content summary:
- HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 1
setup of an unattended remote NOS installation and remote NOS image deployment; • a zip file with copies of the disks needed for the installation. ftp://ftp.hp.com/pub/servers/software/unattended.zip All this information is available on the HP web site: http://www.hp.com/go/netservers 1 - HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 2
below. The second part of this section describes how to configure your "file" server, what you must change and where. a) Creating the 2 disks required for an unattended installation 1 - Disk 1 prepares the hard drive peripherals For a successful automated installation on a Netserver, you must have - HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 3
FullName = "Netserver" OrgName = "HP" ; This part is automatically provided by the autoexec.bat script, so leave it blank ComputerName= ; Please add your own OS license number ProductId = "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX" ; Just an example of a specific command line for Netserver LH6000 to patch - HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 4
values for TCP/IP DHCP = Yes ;DNSDomain = dns.hp.com ;DNSServerSearchOrder = dns1.hp.com , dns2.hp.com ;EnableLMHosts = Yes ;DefaultGateway = 192.168.100.254 0 [SNMP] ; Set the parameters for a specific network service Accept_CommunityName = public:Read_Create Any_Host = Yes Community_Name = public - HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 5
is more difficult to create because we have to start the Netserver, access the CD ROM or a mapped network drive, copy all the files and then launch the installation. This disk will be an MS DOS boot disk, with CD ROM drivers (in case of unattended installation by CD) or TCP/IP stack - HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 6
via "copydisk.exe" on the Navigator CD. For W2K, depending on the HP Netserver (drivers), you may not have to change anything. • On the "file" server, you must create a shared file. We suggest the following name: For W2K Advanced Server = W2KSRV • For W2K , copy the whole of the folder W2KSRV from - HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 7
=W2KSRV>> A:\VARS.BAT For NT4, you will have to find the drivers of your HP Netserver to complete the following process (e.g. within the CD ROM=LH3 and LH4) because Win2K is plug and play, WinNT4 is not. • On the "file" server, you must create a shared file. We suggest the following name: For - HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 8
on the HP Netserver Navigator CD under TTRC To create a disk image (*.dsk) of your disk and to copy it to the directory, please follow these steps: • Open a MS DOS window • Launch copydisk.exe using this syntax: Copydisk sourcedrive destinationpath where "sourcedrive" is a floppy disk drive on your - HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 9
information from the TT_RCC • From the HP Toptools Remote Control Card software interface, click the Remote Control tab. • If prompted, log on as ADMIN using the password ADMIN. • Click on Power on or Power cycle / Remote Boot ... • Enter the IP address of the TFTP server = for example:192.168.100 - HP D5970A | How to perform unattended NOS installation Using HP Toptools Remote - Page 10
by clicking "yes". Follow the steps via the Text remote console. • When the server has finished preparing the disk and reboots again, configure the TT_RCC to reboot with the subject to change without notice. © Copyright Hewlett-Packard Company 2000. All Rights Reserved. Reproduction, adaptation, or
![](/manual_guide/products/hewlettpackard-lh3000r-perform-unattended-nos-installation-using-hp-toptools-remote-control-d151cc0/1.png)
1
remote unattended
NOS installation
application
note
This document describes how to implement remote unattended NOS
installation. It is distributed together with :
• pdf files with all details required for the setup of an unattended
remote NOS installation and remote NOS image deployment;
• a zip file with copies of the disks needed for the installation.
All this information is available on the HP web site: