HP D5970A hp lt 6000r and xp512 disk array config guide — for Mic
HP D5970A - NetServer - LCII Manual
View all HP D5970A manuals
Add to My Manuals
Save this manual to your list of manuals |
HP D5970A manual content summary:
- HP D5970A | hp lt 6000r and xp512 disk array config guide — for Mic - Page 1
Clock speed Number of CPUs BIOS CPU cache RAM Number of power supplies Specification HP Netserver LT 6000r, Ultra 2 models Two Each node must be the same server type, but may have different clock speeds, and main memory and cache sizes. 550 MHz, minimum This certification covers any CPU rate within - HP D5970A | hp lt 6000r and xp512 disk array config guide — for Mic - Page 2
Cables 50 meter 100 meter Specification HP Fibre Channel host bus adapter HP D8602B One Afcw2k.sys, version 3.0.4107.0 (driver obtained from Navigator CD-ROM, version M.04.00, or later) HP Surestore E Disk Array XP512 01-15-10-00/00 5 OPEN-3 Must be HP. Refer to support manuals. 08 Fabric Off/FC-AL - HP D5970A | hp lt 6000r and xp512 disk array config guide — for Mic - Page 3
D5013B (10/100TX PCI) Hptxnt5.sys, version 4.02.27, or later (driver obtained from Navigator CD-ROM L.20.00, or later) Client LAN Configuration Parameter Network Connection NIC Quantity Model Driver Specification Any LAN One HP model D5013B (10/100TX PCI) Hptxnt5.sys, version 4.02.27, or later - HP D5970A | hp lt 6000r and xp512 disk array config guide — for Mic - Page 4
lt6000r2kxp Public LAN Hub or Switch Optical fiber direct FC connection up to 100 meters LT 6000r Heartbeat LAN LT 6000r XP512 HP Netserver LT 6000r Cluster with HP Surestore E Disk Array XP512 12/11/01 4 - HP D5970A | hp lt 6000r and xp512 disk array config guide — for Mic - Page 5
Versions 12 September 2001 Initial release lt6000r2kxp © Copyright 2001, Hewlett-Packard Company 12/11/01 5
12/11/01
1
HP NetServer LT 6000r with the
Disk Array XP512 (Fibre Channel)
Windows
°
2000 Advanced Server
Cluster Configuration Guide
Introduction
This document defines the server cluster configurations supported by Hewlett-Packard for interconnection of
two HP Netserver LT 6000r servers and one HP Surestore E Disk Array XP512 disk drive enclosure, with
Microsoft
Cluster Server software.
These configurations provide high server cluster availability and
minimize single points of failure (SPOFs).
A configuration certified and supported by both Hewlett-Packard
and Microsoft
is included, but any cluster configuration that conforms to the guidelines of this document
will be supported by Hewlett-Packard.
Deviations from the supported configurations can result in an
inoperative cluster, an operating cluster with degraded performance, or hidden SPOFs.
Therefore, deviations
are not supported.
For revision/update information on this document, refer to
Versions
on page 5.
Cluster Configuration Elements
This section identifies the hardware components, system software, network interfaces, and power distribution
arrangement required to build an operational server cluster supported by Hewlett-Packard.
The various
server cluster elements are listed below, and their associated configuration data is detailed in separate tables
and illustrations that follow.
•
Server configuration
•
Shared storage configuration
•
Microsoft
and HP certified server configuration
•
Intra-cluster (heartbeat) LAN configuration
•
Client LAN configuration
•
Cabling configuration
Server Configuration
Parameter
Specification
Server
Type
HP Netserver LT 6000r, Ultra 2 models
Number of nodes
Two
Each node must be the same server type, but may have different clock speeds, and
main memory and cache sizes.
Clock speed
550 MHz, minimum
This certification covers any CPU rate within 500 MHz of the certified speed.
Number of CPUs
Two, minimum
BIOS
Version 4.06.33 PW, or later
CPU cache
Any size
RAM
256 MB, minimum.
Must be HP.
Number of power
supplies
Two standard, three required for redundancy