HP D5970A hp netserver lc 2000 netraid-2m config guide — for Micr
HP D5970A - NetServer - LCII Manual
View all HP D5970A manuals
Add to My Manuals
Save this manual to your list of manuals |
HP D5970A manual content summary:
- HP D5970A | hp netserver lc 2000 netraid-2m config guide — for Micr - Page 1
Number of CPUs BIOS CPU cache RAM Number of power supplies Specification HP Netserver LC 2000, Ultra 3 models Two Each node must be the same server type, but nodes may differ in their CPU clock speeds and cache sizes, and amounts of main memory. 1 GHz Two Version 4.06.03 RM, or later Any size 256 - HP D5970A | hp netserver lc 2000 netraid-2m config guide — for Micr - Page 2
order Local Storage Controller Driver Physical drive location Disk drives SCSI bus SCSI IDs System software Navigator CD-ROM Operating system Service pack Power distribution Layout Specification Added cards may be installed in any appropriate slot, considering the server default boot order provided - HP D5970A | hp netserver lc 2000 netraid-2m config guide — for Micr - Page 3
Specification HP D5954A crossover cable, or equivalent. NIC Quantity Model Driver The intra-cluster LAN may only be used for cluster node communication. It may not be used for client communication. One Embedded NIC Hptxnt5.sys, version 4.02.27, or later (driver obtained from Navigator CD - HP D5970A | hp netserver lc 2000 netraid-2m config guide — for Micr - Page 4
LC20002K2M Client LAN Configuration Parameter Network Connection NIC Quantity Model Driver Specification Any LAN One, minimum Any model that is on both the HP Tested Products List and the Microsoft® Hardware Compatibility List Vendor-supported driver If the NIC used is the same as that of the - HP D5970A | hp netserver lc 2000 netraid-2m config guide — for Micr - Page 5
-2M controllers, the maximum supported for shared storage, installed in slots 5 and 6. One or two NetRAID-2M cards may be used, and one to four RS/12s are supported. A maximum of eight logical drives are supported for the cluster. HP Netserver LC 2000 Cluster using HP Rack Storage/12 Cabling Diagram - HP D5970A | hp netserver lc 2000 netraid-2m config guide — for Micr - Page 6
LC20002K2M Power Cabling to Separate Power Circuits 8/13/01 6 - HP D5970A | hp netserver lc 2000 netraid-2m config guide — for Micr - Page 7
Versions 13 August 2001 Initial release LC20002K2M © Copyright 2001, Hewlett-Packard Company 8/13/01 7
8/13/01
1
HP Netserver LC 2000 with
NetRAID-2M (HP Rack Storage/12)
Windows
°
2000 Advanced Server
Cluster Configuration Guide
Introduction
This document defines the server cluster configurations supported by Hewlett-Packard for interconnection of
two HP Netserver LC 2000 servers and one or two HP Rack Storage/12 disk drive enclosure(s), with
Microsoft
Cluster Server software.
These configurations provide high server cluster availability and
minimize single points of failure (SPOFs).
A configuration certified and supported by both Hewlett-Packard
and Microsoft
is included, but any cluster configuration that conforms to the guidelines of this document
will be supported by Hewlett-Packard.
Deviations from the supported configurations can result in an
inoperative cluster, an operating cluster with degraded performance, or hidden SPOFs.
Therefore, deviations
are not supported.
For revision/update information on this document, refer to
Versions
on page 7.
Cluster Configuration Elements
This section identifies the hardware components, system software, network interfaces, and power distribution
arrangement required to build an operational server cluster supported by Hewlett-Packard.
The various
server cluster elements are listed below, and their associated configuration data is detailed in separate tables
and illustrations that follow.
•
Server configuration
•
Shared storage configuration
•
Microsoft
and HP certified server configuration
•
Intra-cluster (heartbeat) LAN configuration
•
Client LAN configuration
•
SCSI cabling and power distribution configuration
Server Configuration
Parameter
Specification
Server
Type
HP Netserver LC 2000, Ultra 3 models
Number of nodes
Two
Each node must be the same server type, but nodes may differ in their CPU
clock speeds and cache sizes, and amounts of main memory.
Clock speed
1 GHz
Number of CPUs
Two
BIOS
Version 4.06.03 RM, or later
CPU cache
Any size
RAM
256 MB, minimum.
Must be HP.
Number of power
supplies
One standard, two required for redundancy