HP D5970A HP Netserver LH 3 30/FC Installation Guide

HP D5970A - NetServer - LCII Manual

Get HP D5970A - NetServer - LCII PDF manuals and user guides View all HP D5970A manuals
Add to My Manuals
Save this manual to your list of manuals

HP D5970A manual content summary:

  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 1
    HP NetServer Microsoft Cluster Installation Guide - This is the first of two documents used to install the cluster. It covers the installation of all cluster supported HP and must be used with the installation guide. It provides instructions for installing and setting up your shared storage devices. 17
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 2
    November 1998 Version History Updated the pdf to include the latest version of the HP NetServer Microsoft Cluster Installation Guide. This later version incorporates technical, grammatical and format changes along with adding installation instructions for additional HP NetServers. Package released
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 3
    30-FC configurations supported by HP. Any configuration not expressly allowed by this guide will not be supported by HP. What's Defined in Cluster Cluster SPUs Local and Shared Storage Intra-cluster and Client LANs Shared Storage Cabling Cluster Type of SPUs Installation Number of nodes Shared
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 4
    cache RAM No. of power supplies Local storage I/O slots: LANs LAN connection NIC: Model Driver No. of NICs SPU I\O slot L.13.00 or later Microsoft Windows NT Server 4.0, Enterprise Edition or later SP3 and hotfix "clusfixi", or later HP NetServer LH3 350, 400 or 450 MHz. 2 4.06.25 PL or later Any
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 5
    local storage use PCI slot P8. SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/8), any number. Disk drives (hot swap or fixed) SCSI bus SCSI IDs Shared Host Bus Adapter: Model No. of HBA Driver SPU I/O slot Disk Array Controller: Model No. of controllers Microcode Disk
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 6
    Configuration Cabling Diagrams with Single or Cascaded Hubs." See "Redundant Configuration Cabling Diagrams with Single or Cascaded Hubs." A3724A HP 10-port Short Wave Fibre Channel (FC) Hub A4839A HP 10-port Long Wave FC Hub No. of Hubs Disk Arrays (See Shared Storage.): No. of Disk Arrays No
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 7
    See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to this hub are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. Basic
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 8
    See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. See
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 9
    See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays.
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 10
    See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. See
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 11
    HP NetServer Microsoft Cluster Installation Guide with Shared Storage System Supplement NetRAID (Storage System/6, Rack Storage/8 and Rack Storage/12) HP AutoRAID Disk Array Model 12H or HP A3661B Model 30/FC High Availability Disk Array 8 March 1999
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 12
    be read before performing the associated instruction(s). Do not proceed beyond a Servicing Any service, adjustment, maintenance, or repair must be performed only by authorized service . The following trademarks are used in this manual: • Microsoft and MS-DOS are U.S. HP NetServer Installation Guide 2
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 13
    ASSIGNMENTS ...33 7 MICROSOFT CLUSTER SERVER SOFTWARE SETUP 35 INSTALL MSCS ON SYSTEM B...35 INSTALL MSCS ON SYSTEM A...39 INSTALL SERVICE PACK OR HOT FIX ...39 8 CLUSTER TESTING ...40 HARDWARE VERIFICATION AND LABELING UTILITY 40 CLUSTER INSTALLATION TEST...41 HP NetServer Installation Guide 3
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 14
    local storage. Added installation instructions in part 5 for the LC3. Initial release Intended Audience The guide is for the person who installs, administers, and troubleshoots the Microsoft Cluster Server. Hewlett-Packard assumes this person is qualified to service computer equipment and trained
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 15
    A Graphical Overview to Setting Up the Cluster CAUTION Departing from the sequence shown here may cause unnecessary work and unpredictable results. HP NetServer Installation Guide 5
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 16
    .com. 2. On the site navigator bar, select SEARCH, then search for Q147222 in the "Support & Knowledge Base" category. 3. On the Search Results page, select Group of Hotfixes for Exchange 5.5 and IIS 4.0, then follow the ftp path to download the "clusfixi.exe" file. HP NetServer Installation Guide
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 17
    's Guide on the Microsoft NT 4.0 base CD under \Support\Books • HP NetServer Configuration Guide. If not bundled with this Installation Guide downloaded from the "Planning" page on the HP Cluster Solutions web site at: http://www.hp.com/netserver/products/cluster HP NetServer Installation Guide 7
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 18
    to the Shared Storage Systems and must be installed in specific PCI slots. See the Configuration Guide for your cluster configuration for the HP NetServer PCI slots to use. See instructions supplied with the component or see part "2 NetServer Hardware Setup" of the Shared Storage Supplement for
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 19
    3 Shared Storage Hardware Setup part "3 Shared Storage Hardware Setup" in the Shared Storage Supplement HP NetServer Installation Guide 9
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 20
    instructions in the shared storage supplement. In addition you should have rack layouts of your system printed from the HP NetServers Rack Assistant program. If not, see HP NetServers web site to download this program at: http://www.hp.com . NOTE See the Configuration Guide for your cluster for the
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 21
    Install Windows NT following a procedure specific to your HP NetServer as listed below. Secondly, you will install the applicable Service Pack on the NetServer. Select your procedure from finished, the system reboots and displays the Custom Configuration window. HP NetServer Installation Guide 11
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 22
    the intra-cluster and the client LAN. Be sure to load the correct intra-cluster LAN driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver twice, once for the intra-cluster NIC and once for the client NIC. • Make sure TCP
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 23
    the intra-cluster and the client LAN. Be sure to load the correct intra-cluster LAN driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver twice, once for the intra-cluster NIC and once for the client NIC. • Make sure TCP
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 24
    intra-cluster LAN driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver twice, once for must be on different subnets. LH 3 These procedures provide instructions for servers using NetRAID, AutoRAID Model 12H, and Model 30
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 25
    manually specify the mass storage drivers: • The drivers are loaded from the NT 4.0 Drivers floppy disk you created from the Navigator CD. • First, load the driver LAN driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver twice,
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 26
    addresses must be on different subnets. 4. Once the NT installation is complete, the D5013A NIC drivers must be manually set to the correct LAN speed. Log on and from the start menu select: Settings, by clicking the Back button twice on the displayed window. HP NetServer Installation Guide 16
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 27
    drivers you need. If you are using the embedded SCSI channels, load the Symbios driver at this time. 4. Continue the installation and select the following options when prompted: • Choose the unpartitioned space and install Windows NT. • Choose NTFS file system HP NetServer Installation Guide
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 28
    driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver is complete, the D5013A NIC drivers must be manually set to the correct LAN setting. LH 4 These procedures provide instructions for servers using NetRAID, AutoRAID Model
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 29
    manually specify the mass storage drivers: • The drivers are loaded from the NT 4.0 Drivers floppy disk you created from the Navigator CD. • First, load the driver LAN driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver twice,
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 30
    Once the NT installation is complete, the D5013A NIC drivers must be manually set to the correct LAN speed. Log on and Do not use the Auto setting. LPr These procedures provide instructions for servers using NetRAID and AutoRAID shared storage solutions. NOTE HP NetServer Installation Guide 20
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 31
    the instructions to create the NetRAID Assistant installation floppy disks. Label the floppy disks HP NetRAID Assistant 1 and HP correct intra-cluster LAN driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver twice, once for
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 32
    must be on different subnets. 4. Once the NT installation is complete, the D5013A NIC drivers must be manually set to the correct LAN speed. Log on and from the start menu select: Settings, partition, Navigator returns to the Custom Configuration screen. HP NetServer Installation Guide 22
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 33
    the instructions to create the NetRAID Assistant installation floppy disks. Label the floppy disks HP NetRAID Assistant 1 and HP correct intra-cluster LAN driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver twice, once for
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 34
    must be on different subnets. 5. Once the NT installation is complete, the D5013A NIC drivers must be manually set to the correct LAN speed. Log on and from the start menu select: Settings, unpartitioned space and install Windows NT. • Choose NTFS file system HP NetServer Installation Guide 24
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 35
    intra-cluster LAN driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver twice, once for must be on different subnets. LXr 8000 These procedures provide instructions for servers using NetRAID, AutoRAID Model 12H, and Model
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 36
    intra-cluster LAN driver version as specified in the Configuration Guide for your cluster. If you are using two HP D5013A NICs, load the driver twice, once for subnets. 4. Once the NT installation is complete, the D5013A NIC drivers must be manually set to the correct LAN speed. Log on and from the
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 37
    Pack for All HP NetServers Refer to the Configuration Guide for your cluster configuration and install the applicable Microsoft Service Pack (SP3 or SP4). Do not install the Hot Fix associated with Service Pack 3 at this time. NOTE Do not install the Microsoft Cluster Server Software (MSCS) at
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 38
    Storage Software Setup" in the Shared Storage Supplement Create the Array File Systems Use the instructions below and Windows NT Disk Administrator to partition, assign drive letters, and format the local (non-shared) disks followed by the shared disk arrays. HP NetServer Installation Guide 28
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 39
    For example, the displayed and usable array capacity for a RAID 5 array would be C(N-1), where N is the number of drives and C is the capacity of one drive. Likewise, for RAID 1 the capacity would be one assigned a temporary drive letter to the disk array. HP NetServer Installation Guide 29
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 40
    and OK when prompted. NOTE In the following example, Disk 2 has been partitioned and Disk Administrator assigned the next sequential letter to the disk array. HP NetServer Installation Guide 30
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 41
    Letter. Disk Administrator displays the Assign Drive Letter dialog. 3. In the dialog, select a drive letter, and click OK. To avoid confusion later, HP recommends that you choose sequential drive letters. The example in this guide uses drive letters X and Y. HP NetServer Installation Guide 31
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 42
    (name) for the drive. Choosing a descriptive label such as "Shared Drive X" will be helpful later when you need to match drive letter assignments at System B. HP NetServer Installation Guide 32
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 43
    the Shutdown Computer prompt (with the option to Restart). 4. Leave the prompt displayed and the computer powered on. The computer is powered on but idle. HP NetServer Installation Guide 33
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 44
    letter that matches the System A drive letter and click OK. Disk Administrator updates the disk driver letter assignment and makes the assignment permanent. NOTE To make sure you are assigning drive letters arrays are now fully configured for use by the cluster. HP NetServer Installation Guide 34
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 45
    about the installation process outlined here, see the Microsoft Cluster Server Administrators Guide. Install MSCS on System B MSCS installation includes slightly different software setups for Click Next. Microsoft Cluster Administrator, Assigning a Cluster Name HP NetServer Installation Guide 35
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 46
    NT installation. Type a Network Name for the LAN Adapter, and check Enable for cluster use. HP recommends that you identify the LAN adapter according to use (for example, intra-cluster LAN). When you LAN adapter, and System A and B reside on the same IP subnet. HP NetServer Installation Guide 36
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 47
    communications between nodes. Move the Intra-cluster LAN to the top of the list so it has the highest priority. See the example dialog below. HP NetServer Installation Guide 37
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 48
    , Setting the LAN Priority 12. Follow the on-screen instructions to order the adapters so that the intra-cluster LAN Cluster Server software. Setup activates your configuration specifications and starts the cluster service. 15. Microsoft Cluster Server is now fully installed on System B. Reboot
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 49
    a number of Service downloaded clusfixi.exe, see "Software" in part "1 What's Needed." 2. Install the Microsoft hotfix clusfixi.exe on System A and System B. NOTE When downloading the file, refer to the Microsoft readme file for instructions on installing the hotfix. HP NetServer Installation Guide
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 50
    include COMMAND.COM, so it is not usable as a DOS disk. Run the Utility CAUTION The Hardware and Verification Utility is designed to run on a single HP NetServer and detailed information on the utility and instructions for setting up and running the utility. HP NetServer Installation Guide 40
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 51
    to download this program. Run CIT Follow the instructions in the CIT program. If additional information is needed refer to CIT on-line help. CIT help is context sensitive and has been expanded to provide detailed instructions for each step of the program. HP NetServer Installation Guide 41
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 52
    HP A3661B Model 30/FC High Availability Disk Array Supplement to HP NetServer Microsoft Cluster Installation Guide July 1, 1998
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 53
    be reviewed for familiarization with safety markings and instructions before installation and operation. Safety Symbols WARNING service-trained personnel. Trademark Notice The use of trademarks or other designations is for reference purposes only. The following trademarks are used in this manual
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 54
    ...34 6 - SHARED STORAGE SOFTWARE SETUP...35 INSTALL THE FIBRE CHANNEL DRIVER ON WINDOWS NT ...35 POWER UP THE HP MODEL 30/FC HIGH AVAILABILITY DISK ARRAY 36 INSTALL THE HP MODEL 30/FC HIGH AVAILABILITY DISK ARRAY SOFTWARE 38 SET THE HP MODEL 30/FC HIGH AVAILABILITY DISK ARRAY OPERATING MODE 39 3
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 55
    supplement, turn to the installation guide to get the necessary instructions. Operating System The HP Model 30/FC High Availability Disk Array is supported in clustered environments on HP NetServer LXr Pro8 Series systems running the Microsoft Windows NT 4.0 Service Pack 3 or later operating system
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 56
    Manual (part number A3232-90002). ì Hewlett-Packard Model 30/FC High Availability Disk Array User's Guide and Service Manual Addendum for Microsoft Windows NT 4.0 (part number A3661-90019). The manuals are enclosed with the hardware components. To part 1 of the HP NetServer Installation Guide
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 57
    the FC I/O Adapter 1. Install the FC I/O Adapter in the PCI Slot Install the FC I/O adapter in an appropriate PCI slot as specified in the Configuration Guide for the HP NetServer. Installation steps are shown for both vertical and horizontal installations. Install a FC I/O adapter in each
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 58
    the GBIC into the receptacle on the FC I/O adapter (see figure 2). NOTE The GBIC can only be installed one way, because the GBIC and guide rails inside the FC I/O adapter receptacle are keyed. Installing the GBIC Figure 2. GBIC Module Do not attach Fibre Channel cables to the FC I/O adapter
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 59
    Storage Hardware Setup Install the HP FC-AL Hub 1. Unpack the HP FC-AL Hub a. Unpack and inspect the HP FC-AL hub for any your sales representative if items are missing. FC-AL hub FC-AL Hub Service and User Manual Power cord FC port covers in each port Mounting ear bracket Rubber feet Nylon
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 60
    MAC address (reserved for future use) 8. RS-232 port 9. AC power connector 10. Port LED (Port 1 indicated) Figure 4. HP FC-AL short-wave hub The front panel of the long-wave hub (HP A4839A) appears as follows: 24 11 7 13 5 6 8 9 10 1. Power LED 2. Fault LED 3. Reset button 4. Fibre Channel
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 61
    wave loopback cable to a short-wave hub port, plugging the power cord into the HP FC-AL hub, and then plugging the power cord into a power receptacle. The "50/125" as part of the identification information printed on the cable.The HP FC-AL hub does not have a power switch. If using an A4839A long
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 62
    HP FC-AL hub contains the 10 Fibre Channel connectors. a. Record the serial number, located on the bottom of the HP FC-AL hub, before installing the HP the cabinet is adequately secured and has enough space (1 EIA) for the HP FC-AL hub. Remove filler panels as needed from the front of the cabinet
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 63
    column, and insert a 10-32 x .625 machine screw. Securely tighten the screws (see figure 7). Figure 7. Installing the HP FC-AL hub into the cabinet h. The plenum shroud is a back cover that slides onto the HP FC-AL hub. Set the plenum shroud on the front side of the cabinet. Align the holes
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 64
    hub correctly installed in a cabinet If cascading HP FC-AL hubs are being used, install the second HP FC-AL hub, following the same steps used in installing the first HP FC-AL hub. Do not attach Fibre Channel cables or power cords to the HP FC-AL hub at this time. Also, do
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 65
    Model 30/FC High Availability Disk Array Service Manual (part number A3661-90002) to make sure the installation site meets these requirements. The HP Model 30/FC High Availability Disk Array uses 200VAC to 240VAC nominal; 110VAC is not supported. One power distribution unit (PDU) in the cabinet can
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 66
    service point HP E3662A or E3662B 2.0m high, 19-inch wide, 220VAC, EIA cabinet (also called a rack) at the installation site. The disk modules for the disk array are packaged in boxes separate from the disk array chassis. Each box containing disk modules has a label imprinted with the chassis number
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 67
    onto ballstuds. Ballstud Figure 10. Removing the front bezel 3. Prepare the Cabinet The HP Model 30/FC High Availability Disk Array requires 11 EIA units of space in the cabinet. The hardware mounting kit (part number A3661-60006), which is shipped with the disk array, consists of: - 2 rails (part
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 68
    c. Attach the mounting rails to the cabinet as shown (see figure 11). - Determine the location in the cabinet where the disk array is to be mounted. The disk array should be mounted in the lowest position available in the cabinet. - Install two clip nuts (A in figure 11) over the two holes in the
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 69
    4. Install the HP Model 30/FC High Availability Disk Array in the Cabinet a. Remove the fan pack from the back of the disk array. - Grasp the fan pack
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 70
    b. Remove the battery backup unit (BBU) from the back of the disk array. - Locate the BBU. It is above the power supply units. - Grasp the BBU by inserting your thumbs in the holes and your forefingers into the latches. - Slide the latches inward and hold. - Pull the BBU out of the chassis. Back of
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 71
    c. Remove the power supply units from the back of the disk array - Grasp a power supply unit by its handle. - Squeeze the latch toward the handle. - Pull the power supply unit out of the chassis. - Repeat for the other power supply units. Figure 15. Removing a power supply unit 20
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 72
    d. Mount the disk array chassis into the cabinet. WARNING The disk array is very heavy. Use extreme care when moving or lifting it. At least two persons are needed to lift and safely install a disk array into a cabinet. CAUTION The disk array must be installed so that opening the fan pack door
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 73
    the slot ID numbers, refer to the disk array chassis illustrations in chapter 1 of the Hewlett-Packard Model 30/FC High Availability Disk Array Service Manual (A3661-90002). connector. Rail slot Guide slot Disk module's guide Disk module's rail ESD wrist strap Figure 17. Installing a disk
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 74
    f. Replace the power supply units. - Locate the slot where the power supply unit is to be installed. - Slide each power supply unit into its slot while squeezing the latch until it engages the connector. - Press firmly until the power supply unit seats fully into the chassis. Figure 18. Replacing a
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 75
    Set the Fibre Channel ID for the SP in the Disk Array Each HP Model 30/FC High Availability Disk Array can have two SPs (storage processor the priority. NOTE Each SP requires a unique Fibre Channel address number. Using table 2 as a guide, set the switches for the SP's Fibre Channel address. Each
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 76
    7A 122 7B 123 7C 124 7D 125 7E 126 To install additional HP Model 30/FC High Availability Disk Arrays into the same cabinet, first to set the Fibre Channel address of each SP in each disk array to a unique number. Do not attach Fibre Channel cables or power cords at this time. Also, do
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 77
    Disk Array and the cabinet should still be powered down at this time. CAUTION Incorrect wiring can lead to problems, such as devices left off the loop and inaccessible by the HP NetServer. Follow the guidelines below before starting. a. Review the hardware address of each FC-AL device to be
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 78
    other. • If connecting short-wave hubs, refer to figure 28. • If connecting long-wave hubs, refer to figure 29. - When installing long-wave cascading hubs (HP A4839A), make sure the long-wave port (Port 10) is connected only to the long-wave port (Port 10) on the other long-wave hub
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 79
    above the SPs. One Fibre Channel connector is associated with each SP. The HP Model 30/FC High Availability Disk Array can have one or two SPs: SP A and SP B (see figure 24). If connecting the disk array to a single HP FC-AL hub, make the connection to SP A. FC address switchesSP A FC connectors SP
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 80
    Figure 26. Example of a cluster with two HP NetServer LXr Pro8s, one HP FC-AL hub and one disk array 29
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 81
    Figure 27. Example of a cluster with two HP NetServer LXr Pro8s and cascaded hubs 30
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 82
    10 of a short-wave hub. Hub A Hub B To Device 1 To Device 2 Figure 28. Cascaded HP FC-AL short-wave hub (HP A3724A) configuration Correct cabling example, HP FC-AL long-wave hub (HP A48394A) In a cascaded configuration of HP FC-AL long-wave hubs, use a long-wave cable to connect the long-wave
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 83
    connections will be eliminated from the FC-AL loop. Figure 30. Incorrect cabling example: connected ports on the same HP FC-AL hub Do NOT leave cables that are connected to the HP FC-AL hub disconnected at the opposite end of the cable. Figure 31. Incorrect cabling example: disconnected cable Do
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 84
    an HP FC-AL hub to more than one other HP FC-AL hub is NOT a supported configuration. Figure 34. Non-supported cabling example: more than two HP FC-AL hubs connected Do not attach power cords or power up the disk array or the cabinet at this time. To part 4 of the HP NetServer Installation Guide
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 85
    5 - HP NetServer Software Setup To part 5 of the HP NetServer Installation Guide. 34
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 86
    /FC Disk Array and the cabinet should be powered down at this time. To install the Fibre Channel driver Windows NT, perform the following steps on each HP NetServer in the cluster: a. Power up the HP NetServer if it is not already powered up. b. Start Windows NT if it is not running and
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 87
    the other end of the power cord into one of the power outlets in the PDU. c. If the installation uses cascading HP FC-AL hubs, connect a power cord to the second HP FC-AL hub and plug it into the PDU. 3. Power Up the Cabinet a. Connect the cabinet's power cord to the
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 88
    Figure 36. Powering up the disk array 5. Power Up the HP NetServers When the disk array is fully powered up, power up the HP NetServers. After powering up the HP NetServers, verify the FC I/O adapter, GBIC, and cable installation on each HP NetServer in the cluster by looking at the two LEDs on
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 89
    in the background on an HP NetServer. Install this software utility by following the detailed instructions included in the NT Addendum, Hewlett-Packard Model 30/FC High Availability Disk Array User's Guide and Service Manual Addendum for Microsoft Windows NT 4.0 (part number A3661-90019). The disk
  • HP D5970A | HP Netserver LH 3 30/FC Installation Guide - Page 90
    1. Turn off Auto-Trespass a. Make sure that ArrayGUIde has been installed onto the HP NetServers. b. From the Start bar, select Programs. b. Click Windows NT Explorer. causes all disk arrays attached to the HP NetServers to reboot automatically. To part 6 of the HP NetServer Installation Guide. 39
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Microsoft Cluster Installation
Documentation
To assist you in installing your HP NetServer Microsoft Cluster, this file contains three
separate documents combined into one pdf file.
•
Configuration Guide
- This guide provides configuration information specific to your
cluster configuration that you will need during the installation of your cluster.
•
HP NetServer Microsoft Cluster Installation Guide
- This is the first of two
documents used to install the cluster.
It covers the installation of all cluster supported
HP NetServers and the cluster software, and references the Shared Storage Supplement
for installation and setup of the shared storage.
•
Shared Storage Supplement
- This supplement is specific to the shared storage device
you are using and must be used with the installation guide.
It provides instructions for
installing and setting up your shared storage devices.
17 March 1999
(See next page)