HP D5970A Red Hat Linux 8.0 Professional Installation Guide for HP Servers
HP D5970A - NetServer - LCII Manual
View all HP D5970A manuals
Add to My Manuals
Save this manual to your list of manuals |
HP D5970A manual content summary:
- HP D5970A | Red Hat Linux 8.0 Professional Installation Guide for HP Servers - Page 1
Red Hat Linux 8.0 Professional Installation Guide for HP Servers (This document is only available in English.) November 13, 2002 Requirements Server: Red Hat 8.0 Professional is certified for use with HP Server tc2110, tc3100, tc4100, lp1000r [1.13/1.26/1.4 GHz] and lp2000r [1.13/1.26/1.4 GHz] - HP D5970A | Red Hat Linux 8.0 Professional Installation Guide for HP Servers - Page 2
. Press Enter. If you would like to pick the order in which drivers are loaded, enter the command: linux noprobe 3. At the Language selection screen Manually partition with Disk Druid to begin preparing the hard disk. Press Next. 8. Disk partitioning will vary depending on the type of services - HP D5970A | Red Hat Linux 8.0 Professional Installation Guide for HP Servers - Page 3
NOTE: Click on the other drives to deselect them. Additional Size Options: You will have the opportunity to choose the following additional options: - Fixed Size (MB) - Fill all space up to (MB) - Fill to maximum allowable size - Leave at fixed size - Force to be a primary partition - Check for - HP D5970A | Red Hat Linux 8.0 Professional Installation Guide for HP Servers - Page 4
screen, configure the firewall to suit your requirements. Click Next. 15. At the Language Selection screen, select all the languages you would like support for. Click Next. 16. Select the appropriate timezone for your area. Click Next. 17. Enter the root password. On the next line, reconfirm - HP D5970A | Red Hat Linux 8.0 Professional Installation Guide for HP Servers - Page 5
safe place. 25. Installation instructions for installing HP Instant Top Tools and Agents can can be downloaded from the HP website at: http://h20004.www2.hp.com/keeper_rnotes/ 10/100 NIC. The steps below load the NIC driver that Hewlett Packard supports. 27. From the console, enter the command: cd - HP D5970A | Red Hat Linux 8.0 Professional Installation Guide for HP Servers - Page 6
you are working with. 35. Enter the command: /etc/rc.d/init.d/network restart 36. Confirm that the driver listed in "lsmod" is e100 37. Run ifconfig ethX, and try to ping the address assigned to this and Software Sources Red Hat Inc., web access: http://www.redhat.com HP web access: http://www
Red Hat Linux 8.0 Professional
Installation Guide for HP Servers
(This document is only available in English.)
November 13, 2002
Requirements
Server:
Red Hat 8.0 Professional is certified for use with HP Server tc2110, tc3100,
tc4100, lp1000r [1.13/1.26/1.4 GHz] and lp2000r [1.13/1.26/1.4 GHz]
Hardware settings
: You will need to know the following information to complete the
installation:
±²
The monitor's resolution, color depth, and refresh rate.
±²
The display (graphics) adapter manufacturer and model number.
±²
The Ethernet card manufacturer, model number, IRQ, and I/O address.
±²
IP address for the server
±²
Subnet Mask
±²
Default Gateway
±²
Machine Name
±²
Domain Name
Other requirements:
±²
Red Hat Linux 8.0 Professional CD-ROM.
±²
A minimum of 128MB of RAM (256MB or more recommended).
±²
A full installation of Red Hat Linux 8.0 Professional requires around 4.5 GB
±²
One or more Network Interface Cards (NIC).
±²
One or more clean/new hard drives.
±²
Latest system BIOS update. (http://www.hp.com)
1