HP Deskjet D700 Setup Poster

HP Deskjet D700 Manual

HP Deskjet D700 manual content summary:

  • HP Deskjet D700 | Setup Poster - Page 1
    2 Open top cover. Remove orange plastic restraint. HP Deskjet D730 3 Close the top cover. Plug in power supply. 4 Turn printer on. 5 Slide paper guide to the left. Pull out extension. Load white paper. 1 2 3 6 Open top cover. 7 1 Pull pink tab to remove clear tape from print
  • HP Deskjet D700 | Setup Poster - Page 2
    then click the Open button. 5. Click OK, then follow the onscreen instructions. If there is no plug and play, see the Reference Guide. 如果 Windows 1 CD-ROM CD USB 2 3 4 CD CD-ROM . Windows® is a U.S registered trademark of Microsoft Corporation. www.hp.com/support Need more help?
  • 1
  • 2

1
2
3
4
5
6
7
8
9
1
2
3
1
2
*CB728-90006*
*CB728-90006*
*CB728-90006*
Windows
Macintosh
HP Deskjet D730
USB
KO
ZHCN
EN
從此處開始
ZHTW
撕去所有膠帶。
打開頂蓋。拆去橙色的塑膠保護裝置。
關閉頂蓋。插入電源線。
開啟印表機。
將紙張導板滑到左邊。拉出延伸板。裝入白紙。
打開頂蓋。
拉起粉紅色標籤,以撕去列印墨匣上的透明膠帶。
插入列印墨匣。向前推緊墨水匣,直到其卡入到位。
請勿觸摸銅片。
將三色列印墨匣插入左側。
將黑色列印墨匣插入右側。
關閉頂蓋。
連接
USB
纜線。
如果未隨附
USB
纜線,
請單獨購買。
請參閱步驟
10a
請參閱步驟
10b
여기서 시작
모든 테이프를 제거합니다.
윗면 덮개를 엽니다. 주황색 플라스틱 커버를 분리하십시오.
윗면 덮개를 닫습니다. 전원에 플러그를
꽂으십시오.
프린터를 켭니다.
용지 조정대를 왼쪽으로 맞춥니다. 확장판을 당깁니다. 백지를 넣으십시오.
윗면 덮개를 엽니다.
분통색 탭을 당겨 잉크 카트리지에서 테이프를
제거합니다.
잉크 카트리지를 넣습니다. 카트리지가 제 위치로 딸깍하는
소리를 내며 장착될 때까지 앞으로 미십시오.
구리판은 손대지 마십시오.
왼쪽에
3
색 잉크 카트리지를 넣습니다.
오른쪽에 검정 카트리지를 넣습니다.
윗면 덮개를 닫습니다.
USB
케이블을 연결합니다.
USB
케이블이 포함되어 있지
않다면 별도로 구매하십시오.
10a
단계를
참조하십시오.
10b
단계를
참조하십시오.
从这里开始
撕掉所有胶带。
打开顶盖。取出橙色的塑料固定材料。
关闭顶盖。插入电源线。
开启打印机。
将纸张导轨滑向左侧。拉出延伸板。装入白纸。
打开顶盖。
拉起粉色标签,撕掉打印墨盒上的透明胶带。
插入打印墨盒。向前推紧墨盒,直到其卡入到位。
请勿触摸铜片。
将三色打印墨盒插入左侧。
将黑色打印墨盒插入右侧。
关闭顶盖。
连接
USB
线。
如果没有随附
USB
线,
请单独购买。
请参阅步骤
10a
请参阅步骤
10b
Start Here
Remove all tape.
Open top cover. Remove orange plastic restraint.
Close the top cover. Plug in power supply.
Turn printer on.
Slide paper guide to the left. Pull out extension. Load white paper.
Open top cover.
Pull pink tab to remove clear tape from print cartridges.
Insert print cartridges. Firmly push cartridges
forward until they snap into place.
Do not touch copper strip.
Insert the tri-color print cartridge on the left.
Insert the black print cartridge on the right.
Close top cover.
Connect USB cable.
Purchase a USB cable
separately if it is not included.
See step 10a.
See step 10b.