Home » HP Manuals » Servers » HP Integrity BL890c » Manual Viewer

HP Integrity BL890c System Errata for HP Integrity BL860c i2, BL870c i2 &

HP Integrity BL890c - i2 Server Manual

View all HP Integrity BL890c manuals

Add to My Manuals
Save this manual to your list of manuals

HP Integrity BL890c manual content summary:

HP Integrity BL890c | System Errata for HP Integrity BL860c i2, BL870c i2 & - Page 1
System Errata for HP Integrity BL860c i2, BL870c i2 & BL890c i2 Server Blades Part Number: 5991-8080_ed7 Seventh edition: January 2011
HP Integrity BL890c | System Errata for HP Integrity BL860c i2, BL870c i2 & - Page 2
Legal and notice information © Copyright 2010-2011 Hewlett-Packard Development Company, L.P.
HP Integrity BL890c | System Errata for HP Integrity BL860c i2, BL870c i2 & - Page 3
be aware that your Server Blade was updated at the factory after the HP-UX Ignite-UX process, and this procedure outlines a series of steps necessary to The minimum memory requirements for HP Integrity BL860c i2, BL870c i2 and BL890c i2 Server Blades assume that no HP NC532m Dual Port Flex-10
HP Integrity BL890c | System Errata for HP Integrity BL860c i2, BL870c i2 & - Page 4
is supported with Integrity BL860c i2, BL870c i2 and BL890c i2 Server Blades running HP-UX 11i v3. Wake-On-LAN (WOL) is not supported with Integrity servers running Windows or OpenVMS environments. The supported remote power-on solution for Windows and OpenVMS is iLO. Refer to the User Service Guide
HP Integrity BL890c | System Errata for HP Integrity BL860c i2, BL870c i2 & - Page 5
HP Integrity BL860c i2, BL870c i2 & BL890c i2 Server Blade User Service Guide. Product Name(s) HP Integrity BL860c i2 Server Blade HP Integrity BL870c i2 Server Blade HP Integrity BL890c i2 Server Blade Minimum Firmware Version Minimum Firmware Location 21.08 Go to http://www.hp.com -> Support
HP Integrity BL890c | System Errata for HP Integrity BL860c i2, BL870c i2 & - Page 6
6. Refer to the Release Notes or Installation Instructions to verify the firmware version. 6

Section	Page
System Errata for HP Integrity BL860c i2, BL870c i2 & BL890c i2 Server Blades	1
HP-UX Initialization Process for Factory Installed Images Prior to May 10, 2010	3
Additional memory required for NC532m mezzanine cards	3
Additional information regarding memory configuration	4
Virtual Media USB flash drive support limited to read-only support	4
Required Add-on Mezzanine Cards updates	4
Insight Remote Support Advanced requirements	4
Wake-On-LAN (WOL) is not supported in Windows and OpenVMS environments	4
Minimum firmware requirements	4
Firmware requirements for upgrading server blades	5
HP SUM cannot be used to update I/O firmware	5

Match case Limit results 1 per page

System Errata for HP Integrity BL860c

i2, BL870c i2 & BL890c i2 Server

Blades

Part Number: 5991-8080_ed7

Seventh edition: January 2011