HP Integrity Superdome 2 8/16 HP Integrity Superdome 2 Onboard Administrator C
HP Integrity Superdome 2 8/16 Manual
View all HP Integrity Superdome 2 8/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Integrity Superdome 2 8/16 manual content summary:
- HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 1
HP Integrity Superdome 2 Onboard Administrator Command Line Interface User Guide Abstract This document contains specific information that is intended for users of this HP product. HP Part Number: AH337-9002H Published: August 2013 Edition: 8 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP commercial license. Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of Microsoft - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 3
Onboard Administrator 11 Locally accessing the Onboard Administrator 11 2 Command line 13 Command line overview...13 HP Integrity Superdome 2 Server Blade and Integrity server blade restrictions 13 Access level and privileges...13 Account authentication...15 3 General commands 17 CLEAR SCREEN - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 4
NAME MAP...37 SET LDAP PORT...38 SET LDAP SEARCH...38 SET LDAP SERVER...38 SHOW LDAP CERTIFICATE...38 SHOW LDAP GROUP ...39 SHOW LDAP INFO... TEST LDAP...40 UNASSIGN for LDAP...40 UNASSIGN OA LDAP GROUP 41 8 HP SIM commands 42 ADD HPSIM CERTIFICATE...42 DOWNLOAD HPSIM CERTIFICATE 42 REMOVE HPSIM - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 5
11 Enclosure network configuration commands 55 ADD OA DNS...55 ADD SNMP TRAPRECEIVER...55 ADD SSHKEY...55 ADD TRUSTED HOST...56 CLEAR SSHKEY...56 CLEAR VCMODE...56 DISABLE ALERTMAIL...57 DISABLE ENCLOSURE_IP_MODE 57 DISABLE HTTPS...57 DISABLE SECURESH...58 DISABLE SNMP...58 DISABLE TELNET...58 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 6
POWERON XFABRIC...72 RESTART OA ...73 SET DISPLAY EVENTS...73 SET ENCLOSURE ASSET...73 SET ENCLOSURE NAME...74 SET ENCLOSURE PART_NUMBER 74 SET ENCLOSURE PDU_TYPE...74 SET ENCLOSURE SERIAL_NUMBER 75 SET ENCLOSURE UID...75 SET IOX UID...75 SET LLF INTERVAL...75 SET POWER MODE...76 SET POWER LIMIT - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 7
121 DISABLE SYSLOG REMOTE...121 ENABLE SYSLOG REMOTE...121 SET REMOTE SYSLOG PORT 121 SET REMOTE SYSLOG SERVER 121 SHOW SYSLOG SETTINGS 122 TEST SYSLOG...122 Remote syslog example...122 19 USB support commands 123 DOWNLOAD CONFIG using USB key 123 SHOW USBKEY...123 UPLOAD CONFIG using USB key - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 8
HR...160 TEST CAMNET...161 TEST FABRIC...162 TEST CLOCKS...162 24 Core Analysis Engine commands 164 SHOW CAE...164 25 Error Logging Services commands 168 SHOW ERRDUMP...168 26 Debug commands 169 DISABLE OSDEBUGGER...169 ENABLE OSDEBUGGER...169 27 Firmware update commands 170 UPDATE SHOW...170 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 9
update...177 Blade update...177 Warnings during update 177 Errors during update...177 Online complex firmware update on Superdome 2 177 Introduction...177 Services unavailable...178 Management Processor access 178 IPMI...178 Event logs...179 IPMI Watchdog...179 Partition ID...179 Console - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 10
event notifications 192 Command line event notifications 192 32 Support and other resources 194 Before you contact HP...194 HP contact information...194 Subscription service...194 Documentation feedback...194 Installing HP Insight Remote Support Software 194 New and changed information in this - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 11
1 Accessing the CLI Remotely accessing the Onboard Administrator The Onboard Administrator CLI can be accessed remotely through any Telnet or Secure Shell session. Telnet session 1. From a network-connected client, open a command-line window 2. At the prompt, open a Telnet session to the IP address - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 12
1. Connect a serial cable between the serial port on the computer and the corresponding serial port on the Onboard Administrator module. The following table is for the DB9 serial (RS232) port and shows the pinout and signals for the RS232 connector. The signal direction is DTE (computer) relative to - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 13
Integrity Superdome 2 Server Blade and Integrity server blade restrictions HP Integrity Superdome 2 Server Blades and Integrity server blades do not support all commands. The following commands are not applicable to HP Integrity Superdome 2 Server Blades: • HPONCFG • POWERON SERVER • POWEROFF SERVER - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 14
with the Administrator account. OA Administrator • All commands user name/administrator • Enables access to all aspects of the HP Integrity Superdome 2 complex and Onboard Administrator including configuration, firmware updates, user management, and resetting default settings. OA bays (all bays - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 15
Account classification Capabilities own account • Can 'show' CLI commands Account name/privilege level Bays selected for this account Partition management capabilities User access to commands for managing the partition configuration and the partitions themselves can be controlled through the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 16
LDAP is an optional setting. LDAP enabled can be used with local users enabled or disabled. • The Onboard Administrator uses configured LDAP server and search context to request account authentication. • Configuration of the LDAP group determines the privileges instead of the user name. • If a user - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 17
3 General commands CLEAR SCREEN • Command: CLEAR SCREEN NOTE: CLS is also a valid command. • Description: Clears the terminal screen • Access level: All EXIT • Command: EXIT • Description: Exits the CLI • Access level: All HELP • Command: HELP • Description: If you supply a command, the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 18
LOGOUT • Command: LOGOUT • Description: Exits the command line interface • Access level: All QUIT • • • Command: QUIT Description: Exits the command line interface Access level: All 18 General commands - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 19
4 Rack commands SET RACK NAME • Command: SET RACK NAME • Description: Sets the rack name • Access level/Bay level: OA Administrator, OA Operator • Restrictions: The must be a maximum of 32 characters long and includes all alphanumeric, the dash, and the underscore characters. - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 20
Any active OA • Restrictions: None • Example: oa_host_name> connect enclosure 2 run show blade list Connecting to OA 1 in enclosure 2 ... HP Superdome Onboard Administrator ... oa2_host_name> show blade list Bay iLO Name iLO IP Address Status Power UID Partner 1 iLO-002264fd6b66 16.119 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 21
them to a URL, a USB connected to the enclosure, or Archive Storage. • Access level/Bay level: Monarch OA • Restrictions: ◦ If your FTP server does not support anonymous logins, you can specify a username and password within the url formatted as: ftp://username:password@host/path/filename. ◦ The USB - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 22
vcmuser. ASSIGN • Command: ASSIGN {BLADE | INTERCONNECT} { | ALL | -} {"" | LDAP GROUP ""} NOTE: SERVER is a valid alias for BLADE. • Description: Assigns one or more bays to a user or group • Access level/Bay level: OA Administrator - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 23
ASSIGN OA • Command: ASSIGN OA {"" | LDAP GROUP ""} • Description: Assigns the Onboard Administrators specified to an existing user or group • Access level/Bay level: OA Administrator • Restrictions: The is case-sensitive. DISABLE USER • Command: DISABLE USER - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 24
ENABLE STRONG PASSWORDS • Command: ENABLE STRONG PASSWORDS • Description: When enabled, this command requires that a user's password contain at least one character from three of the four categories: ◦ Uppercase ◦ Lowercase ◦ Numeric ◦ Nonalphanumeric • Access level/Bay level: OA Administrator • - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 25
REMOVE USER • Command: REMOVE USER {ALL | "" | CERTIFICATE ""} • Description: Removes a user from the system or any certificate mapped to the user or both. If you specify ALL, then the command is run for all users except the default system accounts. • Access level/Bay level: OA - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 26
SET SESSION TIMEOUT IMPORTANT: On Superdome 2 systems, the following long-running commands are not immediately , use the ASSIGN command to give the user access rights to the Onboard Administrator, server bays, and interconnect bays. • Access level/Bay level: OA Administrator • Restrictions: None - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 27
• Access level/Bay level: ◦ All users can modify their own contact information. ◦ The OA Administrator can modify all users. • Restrictions: ◦ The is case-sensitive. The must be a maximum of 20 characters long and includes all alphanumeric characters, the dash, the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 28
◦ The character set includes all printable characters. ◦ You must specify the password when in SCRIPT MODE. SHOW PASSWORD SETTINGS • Command: SHOW PASSWORD SETTINGS • Description: Displays the current minimum password length and strong password settings • Access level/Bay level: All users • - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 29
user information. • Example: OA-0018FE27577F> SHOW USER Local User "Administrator" Information: Full name: System Administrator Contact Info: User Rights: Admin Account Status: Enabled Server Bay Access List: 1 1A 1B 2 2A 2B 3 3A 3B 4 4A 4B 5 5A 5B 6 6A 6B 7 7A 7B 8 8A 8B Interconnect Bay Access - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 30
UNASSIGN OA • Command: UNASSIGN OA {"" | LDAP GROUP ""} • Description: Removes the Onboard Administrator from the control of the user that it is currently assigned • Access level/Bay level: OA Administrator • Restrictions: The is case-sensitive. 30 User - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 31
6 Two-Factor Authentication commands DISABLE CRL • Command: DISABLE CRL • Description: Disables certificate revocation checks • Access level/Bay level: OA Administrator • Restrictions: None DISABLE TWOFACTOR • Command: DISABLE TWOFACTOR • Description: Disables Two-Factor Authentication • Access - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 32
DOWNLOAD USER CERTIFICATE • Command: DOWNLOAD USER CERTIFICATE "" • Description: ◦ Downloads an x.509 certificate for the user from . The file at must be a Base64 PEM encoded file. ◦ Downloads a CA certificate used in Two-Factor Authentication. • Access level/Bay level: - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 33
= ca.com issuerOrganizationalUnit = IT Infrastructure issuerCommonName = Hewlett-Packard Primary Class 2 Certification Authority subjectOrganization = hp.com subjectOrganizationalUnit = IT Infrastructure subjectCommonName = Hewlett-Packard Primary Class 2 Certification Authority validFrom - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 34
LDAP GROUP • Command: ADD LDAP GROUP "" • Description: Adds an LDAP group to the group. This group must match a group in the directory server. • Access level/Bay level: OA Administrator • Restrictions: ◦ The maximum number of LDAP groups is 30. ◦ Group name must be 1 to 255 characters in - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 35
Access level/Bay level: OA Administrator • Restrictions: None DISABLE LDAP NOTE: If LDAP is enabled, local accounts are disabled, and the LDAP server becomes unavailable, you can recover by booting into Lost Password mode. When booting in Lost Password mode, the local Administrator password is reset - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 36
LDAP is enabled, local accounts are disabled, and the LDAP server becomes unavailable, you can recover by booting into Lost Password to the MD5 . ◦ This command revokes trust in the LDAP server associated with the certificate. • Access level/Bay level: OA Administrator • - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 37
SET LDAP GROUP ACCESS • Command SET LDAP GROUP ACCESS "" {ADMINISTRATOR | OPERATOR | USER} • Description: ◦ Sets the LDAP group access level. ◦ Additionally, use the ASSIGN OA command to give a user or group rights to the Onboard Administrator. • Access level/Bay level: OA Administrator - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 38
port number> • Description: Sets the TCP port number of the LDAP SSL service. Port 636 is the standard value. • Access level/Bay level: OA Access level/Bay level: OA Administrator • Restrictions: None SET LDAP SERVER • Command: SET LDAP SERVER { | } • Description: Sets the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 39
, operator • Restrictions: None • Example: OA-0018FE27577F> SHOW LDAP GROUP LIST Privilege LDAP Group / Level Description Operator [email protected] Widget operators SHOW LDAP INFO • Command: SHOW LDAP INFO • Description: Displays the LDAP settings, including enabled or disabled - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 40
• Restrictions: None • Example: OA-0018FE27577F> SHOW LDAP INFO Directory Services (LDAP) Enabled : Disabled Local Users Enabled : Enabled NT Name Mapping : Disabled Directory Server : Directory Server SSL Port : 0 Search Context #1 : Search Context #2 : Search Context #3 : TEST - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 41
UNASSIGN OA LDAP GROUP • Command: UNASSIGN OA {"" | LDAP GROUP ""} • Description: Disables access to the Onboard Administrator for the group specified • Access level/Bay level: OA Administrator • Restrictions: None UNASSIGN OA LDAP GROUP 41 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 42
CERTIFICATE • Description: Adds an HP SIM certificate on the command line: 1. Start with a string that does CERTIFICATE { | "} • Description: Downloads an HP SIM SSO certificate from the specified IP address • Access level/Bay level - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 43
SHOW HPSIM INFO • Description: Displays the current HP SIM SSO configuration for the Onboard Administrator. The data includes the current HP SIM SSO Trust Mode. (See "SET HPSIM SHOW HPSIM INFO HPSIM Trust Mode: Disabled Trusted Server Certificates No certificates were found. SET HPSIM TRUST MODE 43 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 44
, and TFTP. • Access level/Bay level: OA Administrator • Restrictions: You must format the as protocol://host/path/file. If your FTP server does not support anonymous connections, then you can specify a user name and password by replacing host in the previous format with username:password@host - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 45
Must be 0 to 60 characters long an unstructured name that is assigned to the Onboard Administrator. PING • • Command: PING [] {ip address> | ""} Description: Sends ICMP echo messages to a remote IP device. If you omit , then only four packets are sent. Packets are sent - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 46
: OA Administrator • Restrictions: ◦ Length must be 10 characters. All printable characters are permitted. ◦ This operation cannot be performed on server blades. SET FACTORY • Command: SET FACTORY • Description: ◦ Restores the Onboard Administrator to its factory defaults. The Administrator account - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 47
INFO SHOW INTERCONNECT INFO ALL SHOW INTERCONNECT LIST SHOW INTERCONNECT SESSION SHOW INTERCONNECT STATUS ALL SHOW INTERCONNECT PORT MAP ALL SHOW INTERCONNECT POWERDELAY ALL SHOW SERVER LIST SHOW SERVER NAMES SHOW FRU SHOW SERVER INFO ALL SHOW SERVER PORT MAP ALL SET SCRIPT MODE 47 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 48
TEMP ALL SHOW PARTITION DVD SHOW SERVER POWERDELAY ALL SHOW SERVER BOOT ALL SHOW SYSLOG SERVER ALL SHOW SYSLOG ILO ALL SHOW TOPOLOGY SHOW USBKEY SHOW USER(current user) SHOW USER SESSIONS SHOW USER LIST SHOW LDAP INFO SHOW LDAP CERTIFICATE - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 49
: OA-0018FE27577F> SHOW INTERCONNECT SESSION Interconnect Bay User No Interconnect remote console sessions were detected. SHOW USER SESSIONS IMPORTANT: On Superdome 2 systems, the following long-running commands are not immediately subject to the session timeout defined by the SET SESSION - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 50
• Access level/Bay level: ◦ OA Administrator, OA Operator • Restrictions: None • Example: [MFG Shell Enabled]iduno-oa> show user sessions Username Age Idle Type IP Address -------- Administrator 3s 0s Local 16.127.73.207 Administrator 2h 53m 56s 2h 53m 52s Local 16.191.144.136 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 51
. This causes a reset of the iLO, which causes it to attempt to get an IP address from an external DHCP server. The interconnect is power-cycled. • Access level/Bay level: Administrator, Operator • Restrictions: None ENABLE EBIPA CAUTION: This command cycles power to the interconnect and causes - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 52
} | { NETMASK } | { GATEWAY } | { DOMAIN } | { LOCAL } [ ALL | [{- | ,} ] ] NOTE: SERVER is a valid alias for BLADE. • Description: Sets EBIPA settings, including: ◦ Starting IP address ◦ Netmask ◦ Default gateway, primary - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 53
ports on the active OA is implemented • Access level/Bay level: All • Restrictions: None • Example: fugu-oa> show ebipa EBIPA Device Server Settings Bay Enabled EBIPA/Current 1 No 0.0.0.0 1A No 0.0.0.0 1B No 0.0.0.0 2 No 0.0.0.0 2A No 0.0.0.0 2B No 0.0.0.0 3 No 0.0.0.0 3A No - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 54
4A No 4B No 5 No 5A No 5B No 6 No 6A No 6B No 7 No 7A No 7B No 8 No 8A No 8B No 9 No 9A No 9B No 10 No 10A No 10B No 11 No 11A No 11B No 12 No 12A No 12B No 13 No 13A No 13B No 14 No 14A No 14B No 15 No 15A No 15B No 16 No 16A No 16B No 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 55
• Description: Adds an IP address of a DNS server to the list. DNS servers are used if the system is configured to use a static IP of eight IP addresses can be added to receive SNMP traps. ◦ Only v1 traps are supported. ◦ The must be in the form where each ### ranges from - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 56
• Access level/Bay level: Administrator • Restrictions: ◦ SSHKEY is only available for the Administrator local account. ◦ The SSHKEY string is limited to 8 KB. ADD TRUSTED HOST • Command: ADD TRUSTED HOST • Description: Adds an IP address to the list of systems permitted connectivity - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 57
by Virtual Connect, and blades revert to default Ethernet MAC and Fibre Channel WWN assignments. Virtual Connect might disconnect the servers from Ethernet networks and Fibre Channel fabrics. DISABLE ALERTMAIL • Command: DISABLE ALERTMAIL • Description: Disables the sending of emails when events - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 58
SSH protocol. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: None DISABLE SNMP • Command: DISABLE SNMP • Description: ◦ Disables SNMP support for the Onboard Administrator. ◦ Does not clear the SNMP trap receivers that have been configured. ◦ SNMP trap receivers can still be - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 59
• Command: DISABLE WSMANAGEMENT • Description: Disables the WS-Management service on the enclosure. • Access level/Bay level: OA Administrator in SCRIPT MODE. Supported protocols are HTTP, FTP, TFTP, USB, and archive storage. If your FTP server does not support anonymous connections, then you - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 60
: DOWNLOAD SSHKEY • Description: ◦ Downloads an authorized key file to use for SSH logins. The file contains the public keys for users. ◦ Supported protocols are HTTP, FTP, and TFTP. ◦ Format the as protocol://host/path/file. • Access level/Bay level: Administrator • Restrictions: None - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 61
• Access level/Bay level: OA Administrator, OA Operator • Restrictions: None ENABLE SECURESH • Command: ENABLE SECURESH • Description: Enables SSH support for the Onboard Administrator • Access level/Bay level: OA Administrator, OA Operator • Restrictions: None ENABLE SNMP • Command: ENABLE SNMP - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 62
Level/Bay Level: OA Administrator, OA Operator • Restrictions: None ENABLE WSMANAGEMENT • Command: ENABLE WSMANAGEMENT • Description: Enables the WS-Management service on the enclosure. • Access level/Bay level: OA Administrator • Restrictions: You must be connected to the monarch OA to perform this - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 63
REMOVE OA DNS • Command: REMOVE OA DNS [] • Description: ◦ Removes the IP address of a DNS server from the list for the specified Onboard Administrator. ◦ The DNS servers are used only if the system is configured to use a static IP address. ◦ If no bay number is provided - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 64
Administrator, OA Operator • Restrictions: None SET ALERTMAIL SMTPSERVER • Command: SET ALERTMAIL SMTPSERVER • Description: Sets the AlertMaill SMTP server. This is the mail server where the Onboard Administrator delivers email-based events. 64 Enclosure network configuration commands - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 65
• Access level/Bay level Administrator, OA Operator • Restrictions: The must be in the form where each ### ranges from 0 to 255. SET OA GATEWAY • Command: SET OA GATEWAY [] • Description: ◦ Sets the network default gateway. ◦ This command is used if the system - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 66
obtained from the DHCP. This setting immediately takes effect. If DYNAMICDNS is specified, then the DNS server is notified of the new IP address of the system when it is received from the DHCP server. ◦ To configure in DHCP mode, use the following command format: SET IPCONFIG DHCP [ - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 67
: SHOW NETWORK • Description: Displays: ◦ DHCP state ◦ Dynamic DNS state ◦ IP address subnet mask ◦ Gateway address ◦ Primary and secondary DNS addresses ◦ MAC address ◦ HTTP and HTTPS server status ◦ SNMP status SET SNMP CONTACT 67 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 68
HPSIM Trust Mode: Disabled Telnet: Enabled AlertMail: Disabled Mailbox: Not Set SMTP Server: Not Set Sender Domain: Not Set XML Reply: Enabled NTP: Disabled Primary NTP server: 16.110.135.123 Secondary NTP server: Not Set WSMan: Enabled Link Loss Failover: Disabled Link Loss Interval: 60 seconds - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 69
SHOW SNMP • Command: SHOW SNMP • Description: Displays: ◦ Status ◦ SNMP system name ◦ Location ◦ Contact ◦ Read community name ◦ Write community name ◦ List of the trap destinations • Access level/Bay level: OA Administrator, OA Operator, OA user • Restrictions: None • Example: OA-0018FE27577F> SHOW - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 70
SHOW SSHKEY • Command: SHOW SSHKEY • Description: Displays the contents of the existing SSH authorized key files • Access level/Bay level: Administrator • Restrictions: None • Example: Firmware Version: 2.20 Built: 04/14/2008 @ 14:04 OA Bay Number: 1 OA Role: Active Authenticating with - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 71
12 Enclosure management commands CLEAR SYSLOG CAUTION: You cannot restore this information after you delete it. • Command: CLEAR SYSLOG {ENCLOSURE | OA } • Description: Clears the Onboard Administrator system log. If you do not specify a bay number, the Active Onboard Administrator - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 72
• Access level/Bay level: OA Administrator • Restriction: None ENABLE LLF • Command: ENABLE LLF • Description: Enables Link Loss Failover for Onboard Administrator Redundancy. • Access level/Bay level: Operator, Administrator • Restrictions: You must have OA permission to perform this command. - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 73
RESTART OA • Command: RESTART OA [] • Description: Resets the Onboard Administrator module specified by . If no bay number is given, then the Onboard Administrator the user is logged in to is restarted. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 74
SET ENCLOSURE NAME • Command: SET ENCLOSURE NAME "" • Description: ◦ Changes the enclosure name. ◦ The default enclosure name is the mid-plane serial number. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: The must be 1 to 32 characters long - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 75
SET ENCLOSURE SERIAL_NUMBER • Command: SET ENCLOSURE SERIAL_NUMBER "" • Description: Sets the enclosure serial number. • Access level/Bay level: OA Administrator • Restrictions: Must be 10 characters in length and includes all alphanumeric, underscore (_), and dash (-) characters. SET - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 76
all healthy power supplies in the enclosure power capacity. The loss of even a single power supply might result in oversubscription. CAUTION: HP does not recommend the NOTREDUNDANT setting for production systems. ◦ The POWERSUPPLY setting enables one lower (1-6) and one upper (7-12) power supply - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 77
◦ The Dynamic Power Savings mode is established at the complex level and is managed from the Monarch OA. A change in Dynamic Power Savings mode is propagated to all OAs in the complex. ◦ Automatically turns on additional supplies as needed in response to rapid increases in load. NOTE: This setting - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 78
POWERDELAY 5 0 SET INTERCONNECT POWERDELAY 6 0 SET INTERCONNECT POWERDELAY 7 0 SET INTERCONNECT POWERDELAY 8 0 SET SERVER POWERDELAY 1 0 SET SERVER POWERDELAY 2 0 SET SERVER POWERDELAY 3 0 SET SERVER POWERDELAY 4 0 --More-- (20% of 4709 bytes) SHOW DATE • Command: SHOW DATE • Description - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 79
• Restrictions: None • Example: OA-0018FE27577F> SHOW DISPLAY EVENTS Display Events is set to OFF. SHOW ENCLOSURE FAN • Command: SHOW ENCLOSURE FAN { | ALL} • Description: Displays information about, and current status of the specified enclosure fan • Access level/Bay level: All • - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 80
Enclosure Number: 1 Enclosure Name: OA-00A1B2C3D4E5 Enclosure Type: Superdome Gen2 Enclosure Onboard Administrator Hardware Version: 1.00 Part Number: PDU Spare Part Number: Onboard Administrator Tray Information: Type: HP BladeSystem c7000 Onboard Administrator Tray Spare Part Number: 416000-001 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 81
HP Fw Version: 2.2.2 Diagnostic Status: Internal Data OK SHOW ENCLOSURE POWERSUPPLY IMPORTANT: In a complex with one or more failed power supplies it is possible for attempts to power on servers to enable powering on servers prior to the failed power supplies being serviced. This applies to AC - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 82
Supply #1 Information: Status: OK AC Input Status: OK Capacity: 2400 Watts Current Power Output: 275 Watts Serial Number: 5AGUD0AHLWW1V2 Product Name: HP 2400W HE PSU Part Number: 499253-B21 Spare Part Number: 500242-001 Product Ver: 01 Diagnostic Status: Internal Data OK Device Failure - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 83
Fan 3: 14000 RPM (78%) Fan 4: 14000 RPM (78%) Fan 5: 14000 RPM (78%) Fan 6: 14000 RPM (78%) Fan 7: 14000 RPM (78%) Fan 8: 14000 RPM (78%) Fan 9: 14000 RPM (78%) Fan 10: 14000 RPM (78%) Fan 11: 14000 RPM (78%) Fan 12: 14000 RPM (78%) Fan 13: 14000 RPM (78%) Fan 14: 14000 RPM (78%) Fan 15: 14000 RPM ( - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 84
Service for troubleshooting, repair, and ordering replacements. • Access level/Bay level: ◦ All ◦ Bay specific • Restrictions: You must have access to the specified bay. • Example: OA_hostname> show fru Enclosure Model: Superdome Gen2 Enclosure Manufacturer: HP Serial Number: 1Z34AB7890 Part - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 85
Part Number: 647586-B21 Spare Part Number: 649940-001 Product Ver: X2 Interconnect 1 Model: 4X DDR IB Switch Module for HP c-Class BladeSystem Manufacturer: HP Serial Number: IL2YWWZZZZ Part Number: 410398-B21 Spare Part Number: 410408-001 ... Fan 1 Model: BladeSystem c-Class fan Part Number - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 86
Serial Number: 543543861 Firmware Bundle Revision: 2.5 Engineering Date Code (EDC): XA01 SHOW OA • Command: SHOW OA {CERTIFICATE | INFO | NETWORK | STATUS | USB} [ALL | ]] • Description: Displays the certificate information, network configuration, status, or USB mode of the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 87
oa2> show oa info 1 Onboard Administrator #1 information: Model: Superdome 2 Onboard Administrator Part Number: AH389-60001 Spare Part Number: AH389-60001 Serial Number: OA8CBK0069 UUID: 02OA8CBK0069 Manufacturer: HP Firmware Bundle Revision: 0.6.35 Hw Version: A01 SHOW OA NETWORK • - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 88
Enclosure IP Mode: Not Supported SHOW OA STATUS • Command: SHOW OA STATUS [ALL | ]] • Description: Displays health status for the Onboard Administrator. If you do not specify - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 89
BLADE command does not apply to HP Integrity Superdome 2 server blades or HP Integrity server blades. • Examples: OA-0016355E560A> SHOW SYSLOG SERVER 1 Retrieving Server syslogs ... Server 1 Syslog: < EVENT_LOG DESCRIPTION="Integrated Management Log"> < EVENT SEVERITY="Informational" CLASS - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 90
SHOW SYSLOG OA • Command: SHOW SYSLOG OA [] • Description: Displays the syslog for the Onboard Administrator. If no bay number is given, then the Active Onboard Administrator syslog appears. • Access level/Bay level: All • Restrictions: None • Example: OA-0018FE27577F> SHOW SYSLOG OA Apr - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 91
are FTP, TFTP, USB, and Archive Storage. The URL must be formatted as: protocol://host/path/filename. If your FTP server does not support anonymous logins, you can specify a user name and password within the URL formatted as: ftp://username:password@host/path/filename. To save a configuration - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 92
NTP protocol ◦ Does not clear any NTP servers that have been configured • Access level/Bay level: OA Administrator, OA Operator • Restrictions: You must be connected to the monarch OA. ENABLE NTP • Command: ENABLE NTP • Description: Enables NTP support for the Onboard Administrator • Access level - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 93
RESTART COMPLEX CAUTION: This command ungracefully halts all processing across the HP Integrity Superdome 2 complex. This can cause partitions in the complex to lose data and possibly become unstable. Do not use this command unless you have tried the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 94
For valid time zones, see "Time zone settings" (page 207). SET NTP PRIMARY • Command: SET NTP PRIMARY • Description: Sets the primary server used for synchronizing time and date using the NTP protocol • Access level/Bay level: OA Administrator, OA Operator • Restrictions: ◦ You must be - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 95
SECONDARY • Command: SET NTP SECONDARY > • Description: Sets the secondary server used for synchronizing time and date using the NTP protocol • Access level/Bay level: Complex1 Original Product Number: AH337A Current Product Number: AH337A UUID: Unset Manufacturer: hp SET NTP SECONDARY 95 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 96
Serial Number: Unset Complex Type: 03000102 Configured Complex FW Revision: 0.6.35 SHOW COMPLEX STATUS • Command: SHOW COMPLEX STATUS • Description: Displays complex operational status information: ◦ Overall complex status ◦ Complex enclosure ID status ◦ Complex enclosure status ◦ Complex robust - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 97
to the specified bay number. SET BLADE UID • Command: SET BLADE UID {ALL | ]} {ON | OFF} NOTE: SERVER is a valid alias for BLADE. • Description: Turns a server blade UID LED on or off • Access level/Bay level: ◦ All ◦ Bay specific • Restrictions: You must have access to the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 98
specific • Restrictions: You must have access to the specified bay numbers. • Example: sphere-oa2> show blade info 1 Server Blade #1 Information: Type: Server Blade Manufacturer: HP Product Name: CB900s i2 Part Number: AH342-60003 System Board Spare Part Number: AH342-60003 Serial Number: MYJ84901ZG - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 99
MAC Address: 00:24:81:D2:05:7C Management Processor Information: Type: Integrity iLO 3 Name: iLO-00237dd565f4 IP Address: 16.93.73.240 MAC Command: SHOW BLADE LIST NOTE: SERVER is a valid alias for BLADE. • Description: Displays a brief description of all server blades to which the current user - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 100
access to the specified bay number. • Example: OA-0018FE27577F> show blade names Bay Server Name Serial Number Status Power UID Partner 1 First89123HostNameInILO USM64204B1 OK On Off 2 Integrity BL860c CSJ0634214 OK On Off 3 [Absent] 4 [Absent] 5 [Subsumed] 6 [Subsumed] 7 YOUR - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 101
: ◦ You must have access to the specified bay number. ◦ This command is not applicable to storage blades. • Example: OA-0018FE27577F> SHOW SERVER PORT MAP Mezz Mezz Mezz Device Port Interconnect Interconnect Slot Device Port Status Bay Bay Port Device ID Blade 001 --------- < absent - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 102
Disabled Delay (seconds) SHOW BLADE STATUS • Command: SHOW BLADE STATUS {ALL | ]} NOTE: SERVER is a valid alias for BLADE. • Description: Displays the following settings of server blade: ◦ Power (OK or off) ◦ Health (OK, CPU failure, or power module failure) ◦ Thermal (OK - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 103
Info OK Firmware Mismatch OK PDHC OK Indicted OK SHOW BLADE TEMP • Command: SHOW BLADE TEMP {ALL | ]} NOTE: SERVER is a valid alias for BLADE. • Description: Displays the temperature sensor information for a specified blade or range of blades • Access level/Bay - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 104
, OA User • Restrictions: You must be connected to the monarch OA. • Example: grog-oa> show iox info 9 IOX 9 Model: IOX Manufacturer: HP Part Number: AH338-60301 Serial Number: MYJ94102Y0 Power Supply Bays: 2 Power Supply Bay 1 Model: 512327-B21 Serial Number: 5AQXF0BLLXW53Q Spare Part Number - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 105
Example: oa-hostname> show iox list Bay IOX Type Power: Bay 1 Power: Bay 2 Health UID 5 Superdome IOX On Off OK On 6 [Absent] 7 [Absent] 8 [Absent] 9 Superdome IOX Off Off OK Off 10 Superdome IOX Off Off OK Off 11 [Absent] 12 [Absent] SHOW IOX POWER • Command: SHOW IOX - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 106
SHOW IOX STATUS • Command: SHOW IOX STATUS { ALL | }} • Description: Displays IO expansion enclosure status information: ◦ Status ◦ Power state of I/O bays ◦ UID state ◦ Diagnostic status ◦ Power subsystem status ◦ Cooling subsystem status ◦ Xbar Fabric status ◦ - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 107
Link 2: OK ... Link N: FAILED IO Slots Status: Bay Slot Status 1 1 OK 1 2 OK ... SHOW IOX STATUS 107 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 108
16 Interconnect management commands ASSIGN INTERCONNECT • Command: ASSIGN INTERCONNECT {ALL | ]} {" | LDAP GROUP "} • Description: Assigns interconnects specified to an existing user or group • Access level/Bay level: OA Administrator • - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 109
POWEROFF INTERCONNECT • Command: POWEROFF INTERCONNECT {ALL | ]} • Description: Sends a request to power off the interconnect module • Access level/Bay level: ◦ Administrator, operator ◦ Bay specific • Restrictions: You must have explicit access to a bay given by the ASSIGN - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 110
SET INTERCONNECT POWERDELAY • Command: SET INTERCONNECT POWERDELAY {ALL | ]} {number of seconds to delay power | NOPOWERON} • Description: Sets the PowerDelay status for the specified interconnect or range of interconnects. If the delay is zero, the delay has no effect on the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 111
• Access level/Bay level: All • Restrictions: None • Example: sphere-oa2> show gpsm info 1 Bay 1 GPSM Information: Model: GPSM Board Manufacturer: HP Part Number: AH337-60304 Spare Part Number: AH337-60304 Serial Number: MYJ847044E Engineering Date Code (EDC): XC05 Firmware Bundle Revision: 0.6.35 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 112
Unit Identification LED: Off Diagnostic Status: Internal Data OK Management Processor OK Firmware Mismatch OK Indicted OK SHOW INTERCONNECT INFO • Command: SHOW INTERCONNECT INFO [ALL | | -] • Description: Displays: ◦ Interconnect type ◦ Product name ◦ - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 113
Serial Interface to OA: Absent Internal Serial Route to OA: Disabled External Serial Port Interface: Present External Ethernet Interface: Present 2. Ethernet Product Name: HP 1/10Gb VC-Enet Module Width: Single URL to Management interface: http://16.84.189.186/ In-Band IPv4 Address: 16.84.189.186 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 114
access to a bay given by the ASSIGN INTERCONNECT command. • Example: OA-0018FE27577F> SHOW INTERCONNECT PORT MAP ALL 1: Cisco Catalyst Blade Switch 3120X for HP w/ IP Base Type: Ethernet Width: Single Status: OK Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Status OK OK OK OK Blade 2A - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 115
1 Cisco Catalyst Blade Switch 3120 2 Absent 3 Absent 4 Absent Disabled Disabled Disabled Disabled SHOW INTERCONNECT STATUS • Command: SHOW INTERCONNECT STATUS {ALL | | -} • Description: Displays interconnect status information; UID state and health state • - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 116
Revision • Access level/Bay level: All • Restrictions: None • Example: sphere-oa2> show xfm info all Bay 1 XFM Information: Model: XFM Manufacturer: HP Part Number: AH341-60101 Spare Part Number: AH341-60101 Serial Number: MYJ852008A Engineering Date Code (EDC): XB03 Firmware Bundle Revision: 0.6.35 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 117
SHOW XFM LIST • Command: SHOW XFM LIST • Description: Displays the Xbar Fabric module list. • Access level/Bay level: All • Restrictions: None • Example: sphere-oa2> show xfm list Bay XFM Type Power Health UID 1 XFM On OK Off 2 XFM On OK Off 3 XFM On OK Off 4 XFM On OK Off - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 118
Link 7: Unknown Link 8: Unknown 118 Interconnect management commands - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 119
Date Code • Access level/Bay level: Any • Restrictions: None • Example: sphere-oa2> show dvd info DVD Information: Model: DVD module Manufacturer: HP Part Number: AH337-60105 Spare Part Number: AH337-60105 Serial Number: MYJ85005TS Engineering Date Code (EDC): XA06 SHOW DVD STATUS • Command: SHOW - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 120
Unit Identification LED: Off Diagnostic Status: Internal Data OK Power OK Missing Device OK SET DVD UID • Command: SET DVD UID {ON | OFF} • Description: Sets the DVD UID. • Access level/Bay level ◦ All • Restrictions: None • Example: festival-oa> help set dvd uid on SET DVD UID { ON | - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 121
/Bay level: OA Administrator, OA Operator • Restrictions: The remote port must be an integer between 1 and 65535 inclusive. SET REMOTE SYSLOG SERVER • Command: SET REMOTE SYSLOG SERVER • Description: Sets the IP address or DNS name for remote system log messages. DISABLE SYSLOG REMOTE 121 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 122
time stamp, and the text match the Onboard Administrator syslog entry. Sep 9 16:00:28 10.128.126.204 OA: Remote system logging enabled to server 16.83.33.81, port 514 (priority 13) 122 Remote syslog commands - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 123
protocols are HTTP, FTP, TFTP, and USB. Format the as protocol://host/path/file. If your FTP server does not support anonymous connections, then you can specify a user name and password by replacing the host part in the previous format with username:password@host. To execute a - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 124
be formatted as protocol://host/path/filename. The url syntax for IPv6 addresses is protocol://[]/path/file. If your FTP server does not support anonymous logins, you can specify a username and password within the url formatted as: ftp://username:password@host/path/filename. The file - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 125
HP Instant Capacity user guide for Version 10.x. ICAPSTATUS • Command: ICAPSTATUS • Description: Allows a display of the Superdome 2 system iCAP status in a format similar to an HP by -p. Return 0, 0 means that the hardware is supported by iCAP. Generate machine-readable status. Format keywords would - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 126
to the complex. Set contact email address, mostly for use by GiCAP. Set from-email address. A single complex-wide from-address will be supported. Set iCAP system identification. NOTE: May differ from complex name. Warning period for temporary capacity expiration. Reconcile the number of active cores - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 127
• Access level/Bay level: Operator or Admin • Restriction: You must be connected to the monarch OA. ICAPMODIFY 127 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 128
21 Partition commands For more information on using Partition commands, see the HP Integrity Superdome 2 Partitioning Administrator Guide. ASSIGN PARCON_ADMIN • Command: ASSIGN PARCON_ADMIN { "" | LDAP GROUP "" } • Description: Assigns partition configuration - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 129
UNASSIGN PARTITION • Command: UNASSIGN PARTITION { ALL | [:] [ , - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 130
as the default name can only be specified if the specified name matches the nPar number. Specifies the amount of non-interleaved memory per socket for all blades in the nPartition. The slm value specified with -c or -a option takes precedence over the -L option. The default memory settings depends - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 131
SLM) in MB for the nPartition. If this option is not specified, the default granularity chosen will be 1024 MB. The minimum memory granularity supported is 256 MB Specifies the Intended Active value of the resource type for the nPartition. The valid value for res_type is case-insensitive core. The - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 132
Option [-V flag] Meaning requested resources specified in the parspec is not available for assignment to the partition at boot time. Enable/Disable VGA in an nPartition. The flag value can be either enable or disable. By default, VGA is enabled in an nPartition. VGA is always disabled when running - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 133
(underscore) ◦ . (period) Any other non-numeric character is not allowed in an nPartition name. Specifies the amount of non-interleaved memory per socket The partition specification to modify. When this option is specified all other command options are applied to the specified parspec and not to any - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 134
Option [-O osname] [-T flag] [-a res_type:ia_value] [-G memory_granularity_type] [-A parspecname] [-M type:max_value] [-N mode] [-X parspec:[change_policy]] [-V flag] [-c copy_parspec_name] 134 Partition commands Meaning Specify the OS to be used in the nPartition. This is used to determine the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 135
• Access level/Bay level: OA Administrator, OA Operator • Restriction: ◦ You must be connected to the monarch OA. PARREMOVE • Command: parremove {-p nPartitionId } [-F] [-Z [parspecname]] • Description: Deletes a partition on a local or remote complex. If the partition is active, you must shut down - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 136
[-A] [-M] parstatus {-P} [-Z] [-v] [-M] parstatus {-i IOresource}... [-M] [-V] parstatus {-c blade }} ... [-M] [-V] parstatus {-e enclosure }}... [-M] [-V] parstatus {-p nPartitionId}... [-v] [-z] [-Z] [-M] [-V] [-T] parstatus {-Z parspecName}... parstatus {-s } parstatus {-w [-M] } parstatus {-S} - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 137
for all I/O resources in the complex including I/O on blades. Quiet mode. Returns a success or failure status indicating if the hardware supports partitioning Displays the local nPartition number and name in a verbose fashion. The -M option restricts the display to just the nPartition number - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 138
Current Product Order Number: AH337A OEM Manufacturer: N/A Total number of partitions present: 1 [Enclosure] Enclosure Enclosure Num Num Bay Enclosure Num Type Blades IOBays Slots Name 1 Compute 8 0 8 - 5 IO 0 2 2 - [Blade] Hardware Usage/ CPU Memory Use Par Location Status - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 139
POWEROFF PARTITION • Command: POWEROFF PARTITION {{} [:] [FORCE] [OVERRIDE] | ALL [FORCE] } • Description: ◦ Gracefully shuts down any OS running on the specified nPartition or virtual partition and brings it to an inactive state. The active blades and IO interconnects in the - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 140
of the blades in the nPartition must be assigned to the target virtual partition. For information on partition management, see the HP Integrity Superdome 2 Partitioning Administrator Guide. NOTE: The DVD module is disconnected from a partition when the partition or the OA is shut down or rebooted - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 141
2 Partition 1 has been disconnected from the DVD drive in enclosure 2. NOTE: The SET PARTITION DVD command is not applicable to HP Integrity Superdome 2 server blades. It can only be issued against partitions SHOW PARTITION DVD • Command: SHOW PARTITION DVD { nPartition number or name [ :vPartition - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 142
[Virtual Media Applet is in use.] Partition is not Active 2 NOTE: The SET PARTITION DVD command is not applicable to HP Integrity Superdome 2 server blades. It can only be issued against partitions SHOW PARTITION INFO • Command: SHOW PARTITION INFO { nPartition name or number [ :vPartition - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 143
set the default OS type to be used when any partition is created. Specifies the default value for the amount of non-interleaved memory per socket for all blades in an nPartition. TOC PARTITION 143 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 144
Option [-T flag] [-G memtype:size] [-V flag] [-R target_os] Meaning Specifies the default setting for Hyper-Threading in an nPartition. The valid values for flag are: ◦ y - enables Hyper-Threading, which allows multiple threads to run concurrently on each CPU. ◦ n - disables Hyper-Threading, this - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 145
VPARCREATE • Command: vparcreate [-p vparidentstr] [-a rsrc]... [-Z parspecname] [-N nparidentstr] [-P vp_name] • Description: Creates a new virtual partition using the specified hardware resources. If a virtual partition number is not specified, the command finds an available virtual partition - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 146
or inactive with the next boot mode as vPars. No boot related options other than virtual partition name/number and nPar name/number are supported. The options for the command: Option -p vparidentstr Meaning Specifies the virtual partition to be created in ASCII format either as a name or number - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 147
Option -N nparidentstr Meaning specified, a vPar name in the format is automatically assigned to the created virtual partition. NOTE: The name for the vPar should be specified either using -p or -P . Attempts to specify the vPar name using both options in the same command - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 148
simulates, at the virtual partition level, the hard reset (ReSet, RS) and soft reset (Transfer Of Control, TOC) operations supported by server management processor commands. IMPORTANT: Unintentional use of the vparreset command has serious consequences. Therefore, the operation must be confirmed - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 149
Option -f -N nparidentstr Meaning The force option, this option is required and is used as confirmation before resetting the virtual partition. NOTE: On Superdome 2, the force option is mandatory. Specifies the nPar to which the target vPar belongs. This option is mandatory for a command invoked - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 150
Option Meaning remove the vPar in that nPar. If the -n option is not specified. nparidentstr can be specified as an nPar name or nPar number. • Access level/Bay level: OA Administrator, OA Operator • Restriction: You must be connected to the monarch OA. VPARSTATUS • Command: vparstatus [-v | -M] - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 151
Option -Z parspecname -N nparidentstr -r Meaning Specifies the partition specification from which the virtual partition database has to be chosen. NOTE: When a current parspec is examined with the -Z option, the information provided will be what is stored in the parspec. It should not be expected - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 152
vPar ID>]} • Description: Clears the console log for the specified partition. For information on partition management, see the HP Integrity Superdome 2 Partitioning Administrator Guide. • Access level/Bay level: Administrator, Operator • Restrictions: You must be connected to the monarch OA. 152 Log - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 153
• Command: SHOW PARTITION CONSOLELOG {[:]} • Description: ◦ Launches the Console Log Viewer for the specified partition. ◦ For information on partition management, see the HP Integrity Superdome 2 Partitioning Administrator Guide. CONNECT PARTITION 153 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 154
NOTE: To view the entire Console Log while in the Console Log Viewer, first enter g followed by 2200000 (the maximum size of a Console Log). • Access level/Bay level: All • Restrictions: ◦ The nPar ID and vPar ID values can either be the name or number of the nPartition or virtual partition. ◦ You - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 155
commands HP Integrity Superdome 2 complexes use the HP Integrity Superdome 2 Analysis Engine to provide error handling, logging, analysis and reporting. The Health Repository is one component of the Analysis Engine that you use to access current state and history of error events and service events - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 156
must be formatted as either an 8-byte hexadecimal integer, or a long or medium hardware resource path string (short form strings are not supported). ◦ Must be in the Health Repository viewer. • Example: myhost-HR> dimmerr blade-1/1 DIMM INFO for Cabinet: 1 Board Slot: 1 dimm-1/1/0/1 Location: 1A - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 157
size: 1024 MB myhost-HR> INDICT Command: INDICT Description: Manually indicts a specified component Access level/Bay level: All Restrictions: ◦ The < path string (short form strings are not supported). ◦ Must be in the Health Repository viewer. SHOW ACQUIT • Command: INDICT - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 158
enclosure1/blade2/socket0/dimm16 Timestamp: Mon May 18 16:11:19 2009 Reason: 0x0000000000000001 State: Acquitted FRU Type: CPU Socket Location: 0x0100FF01FF00FF11 enclosure1/blade1/socket0 Timestamp: Mon May 18 16:11:19 2009 Reason: 0x0000000000000001 State: Acquitted --- end report - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 159
be deconfigured without being indicted. Some faults isolated to CPU sockets or blades may require deconfiguration of whole or portions of memory subsystems. This is accomplished by physically deconfiguring the DIMMs supported by that resource. SHOW HR • Command: SHOW HR • Description - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 160
0x0100FF0200160A74 enclosure1/blade2/socket0/dimm16 Timestamp: Mon May 18 15:51:12 2009 Reason: 0x0000000000000001 State: Indicted FRU Type: CPU Socket Location: 0x0100FF01FF00FF11 enclosure1/blade1/socket0 Timestamp: Mon May 18 16:05:57 2009 Reason: 0x0000000000000001 State: Indicted --- end report - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 161
resource path string (short form strings are not supported). ◦ Must be in the Health Repository viewer. 15:45 2009 FRU Type: CPU Socket Location: 0x0100FF01FF00FF11 enclosure1/blade1/socket0 Timestamp manageability fabric. This test detects problems resulting from malfunctioning hardware, missing - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 162
long or medium hardware resource path string (short form strings are not supported). ◦ Must be in the Health Repository viewer. TEST FABRIC • in a series of hardware indictments referencing specific hardware elements encountering problems. To view the generated indictments, see "SHOW INDICT" (page - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 163
• Restrictions: ◦ Must be in the Health Repository viewer. • Example: myhost-HR> test clocks Clocks test started... Blade Sys Clk 0 Sys Clk 1 Blade 1/1 OK OK Blade 1/2 OK OK Blade 1/3 OK OK Blade 1/4 OK OK Blade 1/5 OK OK Blade 1/6 ---- ---Blade 1/7 ---- ---Blade 1/8 ---- ---GPSM Int Clk Ext Clk - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 164
24 Core Analysis Engine commands The Core Analysis Engine is a component of the HP Integrity Superdome 2 Analysis Engine that enables users to review all generated events logged by the Analysis Engine. SHOW CAE • Command: SHOW CAE {-L | -E | -C } • Description: - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 165
Table 1 List of (continued) Argument Description Examples Can be used with: -v [, ... ] NOTE: To see a list - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 166
Table 1 List of (continued) Argument Description Examples Can be used with: -s [asc:|desc:] by the specified column name. on ID. • asc: Ascending order. This is • -s desc:time: Sorts - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 167
Actual Event Time Window Blade Physical Location Blade Serial Number : Fatal/NonRecoverable : Device Alert : Processor : Processor : Processor Problem (Internal Machine Error) : 1 : 0 : 1 : 0 : 100ff01ffffff94 : [Unknown] Version Info : SFW Version OA FW Version Provider Version : Not Available - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 168
| bundle_id | pdhc [:]} • Description: Displays the raw error logs generated by the Error Logging Services for use in troubleshooting of the specified for all partitions, or for the specified nPartition. ◦ The dir argument lists the available log - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 169
26 Debug commands DISABLE OSDEBUGGER • Command: DISABLE OSDEBUGGER • Description: Disables debugger ports on all complex partitions. • Access level/Bay level: OA Administrator, OA Operator • Restrictions: You must be connected to the monarch OA to perform this command. ENABLE OSDEBUGGER • Command: - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 170
27 Firmware update commands For information on online firmware update using the OA GUI, see the HP Integrity Superdome 2 Onboard Administrator User Guide. UPDATE SHOW • Command: UPDATE SHOW { ALL | BLADE [ ALL | ] ] | CONFIG | FAN [ ALL | ] ] | FIRMWARE | - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 171
bundle last installed in the complex and lists devices in the complex which do not share the current firmware version. IMPORTANT: You will be instructed to reapply the complex bundle to update FRUs which do not share the current firmware version. • Access level/Bay level: Any • Restrictions: You - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 172
connected to the monarch OA to perform this command. • Example: OA-001CC414F34F> show blade info 1 Server Blade #1 Information: Type: Server Blade . . . Firmware Bundle Revision: 2.5.0 *MISMATCH AGAINST CONFIGURED REVISION* nPartition Revision: 1.0.0 *MISMATCH AGAINST PARTITION 1* UPDATE FIRMWARE - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 173
Storage, use the for the desired image shown by the SHOW ARCHIVE command. Supported protocols are: ◦ http ◦ ftp ◦ tftp ◦ An image on an attached USB monarch OA. • Example: oa_host_name> update firmware ftp://server/complex_bundle2.3.0 The URI you provided points to firmware bundle - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 174
: Any • Restrictions: You must be connected to the monarch OA to perform this command. • Example: oa_host_name> update npartition 2 ftp://server/complex_bundle2.3 The URI you provided points to firmware bundle version 2.3. The following blades will be updated in partition 2 "par2_name": Enc - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 175
be completely updated. • Warning: A FRU will be partially updated. • Warning: A FRU will not be updated, because the bundle does not support it. • Error: Updating Complex Firmware would result in an active partition being unbootable due to incompatible Partition Firmware. • Warning: Updating Complex - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 176
2 platform firmware is contained in a single bundle. Firmware update commands for Superdome 2 generally process bundle updates targeted at the complex or a partition, but will also support updating IOXs and Server blades in situations where these components need to be updated so they can be - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 177
Superdome 2 complex will bear responsibility to update their own firmware Flash ROMs, reboot updated firmware images, and reestablish internal communications with each other, but it is important to remind operators what kinds of management services will become temporarily unavailable at the server - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 178
Services unavailable Superdome 2 server management features are unavailable during the process of an online complex firmware update. System firmware will continue to operate and support Network management services (SD2 has additional Unavailable services). OS-debugger, HP-SIM XML query, HP-SUM SOAP - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 179
captured by the server management system command (which returns HP-UX partition ID), is the firmware update process. HP-UX caches this information after OS console cannot be serviced on the server management side. Since this should not inhibit OS problem diagnosis in the unlikely event - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 180
complex firmware update process, so HP recommends that the operator not not access server management resources. The following services are not server management that an MCA has occurred once the firmware update completes, and server management will ensure the partition is reset and data integrity - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 181
update? • Answer: HP can not guarantee . 4. How does field support debug if something happened during it was on legacy sx2000 Superdome systems), but the SEL will ready to talk to server management. From an application viewpoint, the process completes. The service processor is unavailable - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 182
any problems. Serviceguard Manager performance degradation and proxy errors Serviceguard Manager may experience some performance degradation or report proxy errors during Superdome 2 namespace error wbemassist reports a namespace error when checking the WBEM Server response. 182 Updating Firmware - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 183
par* and vpar* commands fail Parcon services are not available during Superdome 2 Online Firmware Update. Due to this unavailability, all par* firmware updates. This coordination will largely avoid impact from services which are unavailable during online updates. During online partition updates - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 184
Errors during update If the firmware update analysis detects that the applied partition firmware does not meet both mandates, the update will print an error message and abort/cancel the update. 184 Updating Firmware - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 185
29 Archive Storage commands These commands implement the archive storage feature. Archive Storage provides direct access to the local internal thumbdrive with the purpose of backing up data and storing firmware bundles. SHOW ARCHIVE • Command: show archive • Description: Lists files on the archive - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 186
: OA Administrator Restrictions: None Example: oa-host-name> copy ftp://server/hpsd2fw.bundle archive The file was successfully copied. oa-host-name from an archive, specific IP host, or USB connected to the enclosure. Supported protocols are: ◦ http ◦ ftp ◦ tftp ◦ usb ◦ Archive Storage 186 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 187
be formatted as protocol://host/path/. If your ftp server does not support anonymous connections then you can specify a username and password within the url formatted as ftp://username:password@host/path/. IMPORTANT: HP recommends keeping an off-complex copy of configuration backup files - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 188
• Restrictions: ◦ The filename parameter must not contain any spaces and must have a .pmc extension. ◦ You must be connected to the monarch OA to perform this command. • Example: oa-host-name> UPLOAD PARCONFIG ARCHIVE parconf.pmc File uploaded successfully. 188 Archive Storage commands - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 189
30 Legacy console commands BO These commands are carried forward from previous systems to provide additional functionality for users. These commands function for both nPartitions and virtual partitions. • Command: bo [] • Description: Enables users to power on nPartitions. If is - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 190
FPL • Command: fpl • Description: Equivalent to "SHOW FPL" (page 153). • Access level/Bay level: OA Administrator, OA Operator • Restrictions: You must be connected to the monarch OA to perform this command. PC/PE Command: pc | pe Description: Enables users to control the power state of - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 191
TC • Command: tc [] • Description: Enables users to TOC reset a partition. If is specified, then this command is equivalent to "TOC PARTITION" (page 143). • Access level/Bay level: OA Administrator, OA Operator • Restrictions: You must be connected to the monarch OA to perform this - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 192
module was removed from the monarch enclosure. A change in status has occurred because of a change in the state of one or more hardware components or server readings. The name of an enclosure was changed. The status of a fan has changed. A fan has been inserted. A fan has been removed. A GPSM has - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 193
Event Cause Interconnect Inserted An interconnect module was inserted into an enclosure. Interconnect Thermal Status Changed The thermal status of an interconnect module changed. Interconnect Removed An interconnect module was removed from an enclosure. Interconnect Power Reset The power of - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 194
the installation or upgrade of your product and to enable improved delivery of your HP Warranty, HP Care Pack Service or HP contractual support agreement. HP Insight Remote Support supplements your monitoring, 24x7 to ensure maximum system availability by providing intelligent event diagnosis - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 195
The following documents provide related information: • HP Integrity Superdome 2 Partitioning Administrator Guide You can find these documents from the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals Typographic conventions This document uses the following - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 196
that if not understood or followed will result in personal injury or nonrecoverable system problems. CAUTION: A caution calls attention to important information that if not understood or information to emphasize or supplement important points of the main text. 196 Support and other resources - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 197
that are created and destroyed dynamically when requested. The maximum number of simultaneous live event viewers is limited by the number of connections supported by the OA. Each live event viewer works independently from any other event viewer, meaning that each live event viewer can select its - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 198
ID ◦ hexadecimal dump of event records • Problem/Cause/Action - The Problem/Cause/Action format displays a problem/cause/action statement in addition to the summary and to display column header information Location: Enclosure, Device Bay, Socket, Core, Thread AL: Alert Level 198 Using event logs - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 199
FPL. The OA supports multiple simultaneous FPL viewers. The maximum number of FPL viewers is limited by the number of connections supported by the OA. hexadecimal dump of event records • Problem/Cause/Action - The Problem/Cause/Action format displays the problem/cause/action statement in addition - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 200
sp>,+,-,?,H,C,F,I,L,J,D,K,E,R,T,B,P,V,U,/,\,N,0,1,2,3,5,7,) > Location: Enclosure, Device Bay, Socket, Core, Thread AL: Alert Level Event# Rep to view the event records stored in the SEL. The OA supports multiple simultaneous SEL viewers. The maximum number of SEL viewers is limited - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 201
number of connections supported by the OA. Each SEL viewer works independently from any other viewer, meaning that each SEL viewer can select its own filter options without affecting - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 202
Ctrl-b>) > Location: Enclosure, Device Bay, Socket, Core, Thread AL: Alert Level Event# . The HR database contains current state and history covering both service events and the results of error events analysis. The following problem. 202 Using event logs - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 203
received any required service. This applies to any components contained within the inserted unit as well. For example, DIMMs and CPU sockets on an physical cable needing service. The start link command clears the link health LEDs, acquits, and attempts link retraining. • Manual Acquittal - The - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 204
cause automatic acquittal. Component replacement, complex AC power cycle or manual acquittal is required. Examples are: ◦ BPS indicted for loss State: Configured Current Deconfig State: Configured FRU Type: CPU Socket Location: 0x0100FF01FF00FF11 enclosure1/blade1/socket0 Timestamp: Mon May 18 16 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 205
to CPU sockets or blades may require deconfiguration of whole or portions of memory subsystems by physically deconfiguring the DIMMs supported by that the component in question is rebooted. Viewing recent service history You can view the recent service history using the show acquit command. To view - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 206
60003 Spare Part Num: AH342-60003 Manufacturer: HP Product Name: CB900s i2 Board Serial Num problem from WS-Man alert. Reason: 3:1 Description: Text description of problem Supporting Symptoms - Reason: Text reason of supporting symptom** (not from ws-man). - SubFru Isolation SubFRUs requiring service - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 207
Universal time zone settings NOTE: Time zones must be entered exactly as they appear. The following table provides the Universal time zone settings that are supported by the Onboard Administrator. CET CST6CDT EET EST EST5EDT Etc/GMT Etc/GMT0 Etc/GMT-0 Etc/GMT+0 Etc/GMT-1 Etc/GMT+1 Etc/GMT-2 Etc - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 208
: Time zones must be entered exactly as they appear. The following table provides the Americas time zone settings that are supported by the Onboard Administrator. America/Adak America/Anchorage America/Anguilla America/Antigua America/Araguaina America/Aruba America/Asuncion America/Atka America - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 209
time zone settings NOTE: Time zones must be entered exactly as they appear. The following table provides the Asian time zone settings that are supported by the Onboard Administrator. Asia/Aden Asia/Almaty Asia/Amman Asia/Anadyr Asia/Aqtau Asia/Aqtobe Asia/Ashgabat Asia/Ashkhabad Asia/Baghdad Asia - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 210
Time zones must be entered exactly as they appear. The following table provides the Oceanic time zone settings that are supported by the Onboard Administrator. Atlantic/Azores Atlantic/Bermuda Atlantic/Canary Atlantic/Cape_Verde Atlantic/Faeroe Atlantic/Jan_Mayen Atlantic/Madeira Atlantic/Reykjavik - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 211
must be entered exactly as they appear. The following table provides the Polar time zone settings that are supported by the Onboard Administrator. Antarctica/Casey Antarctica/Davis Antarctica/DumontDUrville Antarctica/Mawson Antarctica/McMurdo Antarctica/Palmer Antarctica/South_Pole Antarctica - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 212
. File transfer protocol. Global partition services module. Graphical user interface. HP Systems Insight Manager. Health Repository. Hypertext transfer protocol. Hypertext transfer protocol secure sockets. Interface adapter. Internet control message protocol. Integrated Lights-Out 3. I/O expansion - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 213
Xbar XFM XML Crossbar. Xbar Fabric module. Extensible markup language. 213 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 214
ASSIGN INTERCONNECT, 108 ASSIGN OA, 23 ASSIGN OA LDAP GROUP, 35 ASSIGN PARCON_ADMIN, 128 ASSIGN PARTITION , 128 authorized reseller HP contact information, 194 Technical support, 194 B Blade management commands, 97 BO, 189 C CL, 189 CLEAR ARCHIVE, 185 CLEAR FPL, 152 CLEAR INTERCONNECT SESSION, 108 - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 215
62 Error Logging Services commands, 168 error messages, 192 errors, fan, 192 errors, power supply failure, 192 errors, server blade failure, 192 help resources, 194 HISTORY, 24 HP SIM commands, 42 I ICAPMODIFY, 126 ICAPSTATUS, 125 INDICT, 157 Integrity blade restrictions, 13 Interconnect management - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 216
LDAP NAME MAP, 37 SET LDAP PORT, 38 SET LDAP SEARCH, 38 SET LDAP SERVER, 38 SET LLF INTERVAL, 75 SET MINIMUM PASSWORD LENGTH, 25 SET NIC, 97 SAVINGS, 76 SET RACK NAME, 19 SET REMOTE SYSLOG PORT, 121 SET REMOTE SYSLOG SERVER, 121 SET SCRIPT MODE, 47 SET SESSION TIMEOUT, 26 SET SNMP COMMUNITY, 66 SET - HP Integrity Superdome 2 8/16 | HP Integrity Superdome 2 Onboard Administrator C - Page 217
29 syntax, 192 system event log, 201 T TC, 191 technical support Before you contact HP, 194 HP contact information, 194 Technical support, 194 Telnet session, 11 terminal emulator session, 11 TEST ALERTMAIL, 70 , 149 VPARRESET, 148 VPARSTATUS, 150 W warnings, 192 websites product manuals, 195 217
HP Integrity Superdome 2 Onboard
Administrator Command Line Interface User
Guide
Abstract
This document contains specific information that is intended for users of this HP product.
HP Part Number: AH337-9002H
Published: August 2013
Edition: 8