HP Integrity rx1600 Instructions for Extending in a Rack - HP Integrity rx1600

v1

February 2004

Printed in the U.S.A.

Instructions for Extending the hp Integrity rx1600

Server in a Rack

The purpose of this document is to show the proper method for extending an rx1600 Server that is installed in a rack.

1.

Loosen the front bezel screws securing the server to the rack.

2.

Disconnect the AC power cord from the server

Figure 1.

3.

The proper method to extend the server is by pushing it forward from the rear (

Figure 2

), or pulling forward via the

empty

drive bays (

Figure 3

).

Figure 2.

Figure 3.

CAUTION

If the server does not easily slide out,

do not

attempt to extend the server by pulling on the

drive tabs (

Figure 1

). This can result in a broken drive tab.

NOTE

Prior to extending the server on the rail, disconnect from AC power.

NOTE

If the drives are removed, be sure to note which drive was installed in which bay.

Installing the drives in the incorrect bay may result in a nonbootable system.