HP Integrity rx2660 Ethernet Card (PCIe) Installation Guide for HP Integrity S
HP Integrity rx2660 Manual
View all HP Integrity rx2660 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Integrity rx2660 manual content summary:
- HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 1
PCIe Ethernet Card Installation Guide for HP Integrity Servers HP-UX, Linux, OpenVMS, and Windows HP Part Number: 5991-6020 Published: April 2008 Edition: 1 - HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 3
• Support Guides and Users Guides, including detailed maintenance and troubleshooting information Prerequisites Review the prerequisites below before performing any installation. • Review the card, technology, and driver documentation. See "Operating Systems Supported on HP Integrity systems - HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 4
Reassemble the server. 5. Power on the server (or slot if using OL*) and any peripheral devices that are attached to the server. Configuring a Card Using HP-UX on HP Integrity Systems To configure the card on a server running HP-UX 11i v1, 11i v2, or 11i v3, follow these steps: 1. Install the card - HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 5
the driver to the latest version, by installing the latest LAN remedial kit for the release. You can find the kit on ftp.itrc.hp.com and select openvms_patches. LAN kits are named release_LAN-Vxxxx.ZIPEXE, for example, VMS83I_LAN-V0500.ZIPEXE is the fifth LAN kit released for Integrity servers - HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 6
to HP Integrity Servers. b. Select one of the HP Integrity servers that supports this adapter (for example, rx2660). c. Click Download drivers and software. d. Click the link that describes the server operating system. e. Click Driver-NIC. f. Select the appropriate driver. g. Download the driver to - HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 7
on HP Integrity Systems The method for installing Linux drivers for the Ethernet card varies depending on the Linux distribution you use. For additional instructions, it is recommended that you see the documentation for each respective Linux distribution. Information on Linux distributions supplied - HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 8
IP. 4. Select Ok. 5. Select Quit. SUSE Linux Enterprise Server Version 10 To configure the Ethernet card on a server running SUSE Linux Enterprise Server Version 10 (SLES10), follow these steps: 1. Boot the server. 2. To display the Network Setup Method screen, enter the following command: # yast - HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 9
9 - HP Integrity rx2660 | Ethernet Card (PCIe) Installation Guide for HP Integrity S - Page 10
*5991-6020* Printed in the US
PCIe Ethernet Card Installation Guide for HP
Integrity Servers
HP-UX, Linux, OpenVMS, and Windows
HP Part Number: 5991-6020
Published: April 2008
Edition: 1