HP J3278B HP CD-ROM Quick Installation Guide

HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Manual

Get HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server PDF manuals and user guides View all HP J3278B manuals
Add to My Manuals
Save this manual to your list of manuals

HP J3278B manual content summary:

  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 1
  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 2
    the server, in the form 00-60-B0-hh-hh-hh (where h is a hexadecimal number). • Refer to the User's Guide if you need more detailed information. Typical Ethernet (10Base-T) Network with an HP CD-ROM Server Stand-Alone Module HP CD-ROM Server Network cables CD-ROM Drives SCSI cables Network Hub
  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 3
    (See User's Guide, chapter 2) Connecting the Hardware You can connect up to seven SCSI CD-ROM drives to a single HP CD-ROM Server (for instructions, see the documentation for your drives). Each connected drive must have a unique SCSI address. SCSI addresses 0 through 6 may be used. The HP CD-ROM
  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 4
    server is not on an NDS network (for example, NetWare 3.x), network configuration is not required. As a NetWare 4.x NDS-compatible server, the HP CD-ROM Server must be installed in the NDS tree, which simply involves setting the appropriate configuration parameters. 1. Use a Windows platform tool
  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 5
    Windows NT and UNIX, use the instructions below to configure the IP address. For other TCP/IP the User's Guide. • For Windows 95 and other systems, refer to the User's Guide to configure TCP your Network Administrator or refer to your system manuals). 3. Use the commands below to configure the
  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 6
    from step 1) arp -s 192.124.138.80 00:60:b0:10:00:86 temp ping 192.124.138.80 Mounting or Mapping Network Drives The HP CD-ROM Server is integrated into your network operating system just like file servers and you use the same commands to access it. To be
  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 7
    Windows 95 & NT 4.0 (SMB Network) 1. Start the Windows Explorer from the Start/Programs Menu. 2. In Network Neighborhood, locate your HP CD-ROM Server under Entire Network/ Workgroup. This may take several minutes. The default name is HPhhhhhh where hhhhhh are the six last digits of
  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 8
    Windows for Workgroups 3.11 (SMB Network) 1. Start File Manager. 2. Select Connect Network Drive... in the Disk menu. The Connect Network Drive dialog is shown. Use default, or select unused drive letter. In 'Path', type: \\HPhhhhhh\CD Then click OK. 3. In the Path field, type the entry for your new
  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 9
    new CD-ROM disc If a valid disc is inserted into any connected drive, the green 'CD' light on the HP CD-ROM Server should turn on. If it does not, power off your CD-ROM server and drives, check your be assigned an individual drive letter in Windows. See chapter 4 in the User's Guide for details.
  • HP J3278B | HP CD-ROM Quick Installation Guide - Page 10
    button 50-pin high-density SCSI-2 Network connectors Power supply connector RJ-45 BNC HP CD-ROM Server Tower Module (Rear View) 50-pin SCSI-2 Power supply connector RJ-45 Network connectors Reset button AUI Copyright © 1997, 1998 Hewlett-Packard Company Manual Part Number 5967-2214 *5967-2214*
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10