HP LH4r HP Netserver LH 3 30/FC Config Guide for Windows NT4.0 Clusters
HP LH4r - NetServer - 256 MB RAM Manual
 |
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
HP LH4r manual content summary:
- HP LH4r | HP Netserver LH 3 30/FC Config Guide for Windows NT4.0 Clusters - Page 1
Disk Array Model 30/FC Cluster Configuration Guide 20 November 1998 Introduction This document defines the supported HP NetServer LH 3 with A3661B High Availability Disk Array Model 30/FC (LH 3/Model 30-FC) configurations for Microsoft Cluster Server. These configurations minimize single points of - HP LH4r | HP Netserver LH 3 30/FC Config Guide for Windows NT4.0 Clusters - Page 2
version CPU cache RAM No. of power supplies Local storage I/O slots: LANs LAN connection NIC: Model Driver No. of NICs SPU I\O slot L.13.00 or later Microsoft Windows NT Server 4.0, Enterprise Edition. SP3 and hotfix "clusfixi", or later HP NetServer LH3 350, 400 or 450 MHz. 2 4.06.25 PL or later - HP LH4r | HP Netserver LH 3 30/FC Config Guide for Windows NT4.0 Clusters - Page 3
Storage Local Controller Cabinets (Physical drive location) Any number, manufacturer or driver in any available I/O slot. However, for NetRAID local storage use PCI slot P8. SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/8), any number. Disk drives (hot swap or fixed - HP LH4r | HP Netserver LH 3 30/FC Config Guide for Windows NT4.0 Clusters - Page 4
A3736A 100 meter FC cable, Any cable ≤500 meters per segment that conforms to ANSI X3.2301994 Fibre Channel Standards Specification (FC-PH) rev 4.3. Any cable ≤2 Diagrams with Single or Cascaded Hubs." A3724A HP 10-port Short Wave Fibre Channel (FC) Hub A4839A HP 10-port Long Wave FC Hub No. of - HP LH4r | HP Netserver LH 3 30/FC Config Guide for Windows NT4.0 Clusters - Page 5
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to this hub are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. Basic - HP LH4r | HP Netserver LH 3 30/FC Config Guide for Windows NT4.0 Clusters - Page 6
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. See - HP LH4r | HP Netserver LH 3 30/FC Config Guide for Windows NT4.0 Clusters - Page 7
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. - HP LH4r | HP Netserver LH 3 30/FC Config Guide for Windows NT4.0 Clusters - Page 8
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. See
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
HP NetServer LH 3
with
A3661B High Availability Disk Array Model 30/FC
Cluster Configuration Guide
20 November 1998
Introduction
This document defines the supported HP NetServer LH 3 with A3661B High Availability Disk Array
Model 30/FC (LH 3/Model 30-FC) configurations for Microsoft Cluster Server.
These configurations
minimize single points of failure, provide maximum availability, and have been certified by Hewlett-
Packard and Microsoft.
This guide is prescriptive; it describes the HP NetServer LH 3 / Model 30-FC
configurations supported by HP.
Any configuration not expressly allowed by this guide will not be
supported by HP.
What’s Defined in Cluster
Cluster
SPUs
Local and Shared Storage
Intra-cluster and Client LANs
Shared Storage Cabling
Cluster
Type of SPUs
HP NetServer LH 3
Each node must be the same model SPU, but may have different size main
memory, cache, and CPU clock speeds.
Installation
Pedestal or racked
Number of nodes
2
Shared Storage
HP Rack Storage/8 with HP NetRAID controller and HP disks.
See
Shared Storage
below.
LANs:
Client LAN
Any NIC that is HP and Microsoft approved.
See
Client LAN
below.
Intra-cluster
(Heartbeat) LAN
HP D5013A or J3171A only with crossover cable. See
Intra-cluster LAN
below.
Power source
Direct from power mains, power conditioner or uninterruptible power
supply (UPS) using any power conditioner or UPS.