HP LH4r HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters
HP LH4r - NetServer - 256 MB RAM Manual
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
HP LH4r manual content summary:
- HP LH4r | HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters - Page 1
Guide July 1, 1998 Introduction This document defines the supported HP NetServer LXr Pro8 with the A3661B High Availability Disk Array Model 30/FC (LXr Pro8/Model 30-FC) configurations for Microsoft Cluster Server Shared Storage LANs: Client Intra-cluster Power source HP NetServer LXr Pro8 - HP LH4r | HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters - Page 2
cache RAM No. of power supplies Local storage I/O slots: LANs LAN connection NIC: Model Driver No. of NICs SPU I/O slot G.01.45 or later Microsoft Windows NT Server 4.0, Enterprise Edition or later SP3 and hotfix "clusfixi", or later HP NetServer LXr Pro8 200 MHz. 2-8 (at least 2 are required for - HP LH4r | HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters - Page 3
bus SPU internal drive bays, HP external drive cabinet (e.g., HP Rack Storage/8), or any combination. Must be HP. SPU embedded controller or any controller (any number, manufacturer or driver) in any available I/O slot (see SPU I/O slots above). Any HP cables that meet SCSI specifications and any - HP LH4r | HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters - Page 4
Channel Hubs: Model No. of Hubs Disk Arrays (See Shared Storage.): No. of Disk Arrays No. of Controllers Hubs." A3724A HP 10-port Short Wave Fibre Channel (FC) Hub A4839A HP 10-port Long Wave FC Hub Basic Configuration: 1 or 2 Redundant Configuration: 2 or 4 with 1 min. or 2. max. per FC Arbitrated - HP LH4r | HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters - Page 5
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to this hub are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. Basic - HP LH4r | HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters - Page 6
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. See - HP LH4r | HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters - Page 7
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. - HP LH4r | HP Netserver LXr Pro8 Config Guide for Windows NT4.0 Clusters - Page 8
See Shared Storage Cables for a list of cables that can be connected to the Short Wave Ports of the hub. Port connections to these hubs are for example only. You can use any port, except for port 10 on Long Wave Hubs. The remaining ports can be used for connection of additional Disk Arrays. See
HP NetServer LXr Pro8
with
A3661B High Availability Disk Array Model 30/FC
Cluster Configuration Guide
July 1, 1998
Introduction
This document defines the supported HP NetServer LXr Pro8 with the A3661B High Availability Disk Array
Model 30/FC (LXr Pro8/Model 30-FC) configurations for Microsoft Cluster Server.
These configurations
minimize single points of failure and provide maximum availability.
They have been certified by Hewlett-
Packard and Microsoft.
This guide is prescriptive; it describes the configurations supported by HP.
If you create any configuration not
expressly allowed by this guide it will not be supported by HP.
HP NetServer clusters have been carefully
designed and tested to allow as much configuration flexibility as possible consistent with high-availability.
What’s Defined
•
Cluster
•
SPUs
•
LANs
•
Local Storage
•
Shared Storage
•
Shared Storage Cables
•
Shared Storage Configurations
Cluster
Type of SPUs
HP NetServer LXr Pro8
Each node must be the same model SPU, but may have different size main
memory and number of CPUs.
Number of nodes
2
Configurations
Basic or Redundant (See Shared Storage Configurations.)
Shared Storage
See
Shared Storage
below.
LANs:
Client
See
Client LAN
below.
Intra-cluster
See
Intra-cluster LAN
below.
Power source
Direct from power mains, power conditioner or uninterruptible power supply
(UPS) using any power conditioner or UPS.