HP Latex 2700 Site Preparation Guide

HP Latex 2700 Manual

Get HP Latex 2700 PDF manuals and user guides View all HP Latex 2700 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Latex 2700 manual content summary:

  • HP Latex 2700 | Site Preparation Guide - Page 1
    HP Latex 2700 Printer Series Site Preparation Guide SUMMARY You are responsible for preparing the physical site for the installation of the printer.
  • HP Latex 2700 | Site Preparation Guide - Page 2
    to change without notice. The only warranties for HP products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors
  • HP Latex 2700 | Site Preparation Guide - Page 3
    ...1 Documentation and useful links...1 Site preparation overview...1 Customer responsibility ...2 Planning the site and printer environment ...2 RIP installation...3 Networking...3 Printing supplies for testing and training...3 Return the site preparation checklist...3 Recycle the disposable ink
  • HP Latex 2700 | Site Preparation Guide - Page 4
    ...22 Ground-floor installation ...22 Lower the printer with ramps ...23 Lower the printer with forklift...23 Above-ground-floor installation...25 in SC4CH Desktop App...29 Fill the Site preparation ...31 Manually ...31 SC4CH Mobile app ...31 How to upload Site preparation in SC4CH Mobile
  • HP Latex 2700 | Site Preparation Guide - Page 5
    information is available from http://www.hp.com/go/latex2700/support. Videos and other training materials are available from: ● http://www.hp.com/supportvideos ● http://www.youtube.com/HPPrinterSupport ● https://lkc.hp.com/blog/hp-latex-2700-printer-series-training See the Solutions website for
  • HP Latex 2700 | Site Preparation Guide - Page 6
    to installation site on page 21. ● Make sure you have the necessary equipment to handle the printer, as well as a specialist mover who is familiar with your site and the information provided in this guide. See Moving equipment on page 22. ● Meet the requirements for upper-level installations (if
  • HP Latex 2700 | Site Preparation Guide - Page 7
    your printer, this guide does printing supplies for use at installation time. The following supplies will be needed: ● Eight ink cartridges for the 2700 printer, or nine for the 2700W printer. NOTE: In addition, you are recommended to have a second set of ink cartridges, printheads, and one HP Latex
  • HP Latex 2700 | Site Preparation Guide - Page 8
    an unprepared site will be charged to document about your printer's ink, available from http://www.hp.com/go/msds. hp.com/recycle/. Liquid waste disposal Dispose of liquid waste in compliance with all applicable federal, state, and local regulations. HP can provide a typical Waste Profile Datasheet
  • HP Latex 2700 | Site Preparation Guide - Page 9
    when the printer is delivered. to the printer should be a smooth and trouble-free installation process this guide. HP, the training will cover the normal use of the RIP. The following aspects of RIP usage will be covered: HP Large Format Onyx Thrive RIP software ● RIP-Queue ● Configure the printer
  • HP Latex 2700 | Site Preparation Guide - Page 10
    the information regarding the electrical configuration. The HP Internal Print Server can be powered with a single-phase line that can be used with an Uninterruptible Power Supply (UPS). The UPS must be rated to meet the power requirements of the printer, and should be in accordance with the wiring
  • HP Latex 2700 | Site Preparation Guide - Page 11
    phase control line (optional) NOTE: The HP Internal Print Server power can be obtained by making that apply to the electrical installation of your printer. NOTE: The printer is not supplied with any power cable. Power different power-supply configurations are supported. Configuration 1: 380-415 V
  • HP Latex 2700 | Site Preparation Guide - Page 12
    Configuration 2: 200-240 V line-to-line three-phase configuration This configuration is specified in detail below. Three-phase specifications Number of power wires) 4 (L1/L2/L3/PE) Input voltage (line to line) 200-240 V Input frequency 50/60 Hz Maximum load current (per phase) 56 A Branch
  • HP Latex 2700 | Site Preparation Guide - Page 13
    Configuration 3: 380-415 V line-to-line three-phase configuration with single- phase control This configuration is specified in detail below. Specifications Three-phase line Single-phase control Number of power wires Input voltage (line to line) Input frequency Maximum load current (per phase)
  • HP Latex 2700 | Site Preparation Guide - Page 14
    required by the Electrical Code of the local jurisdiction. WARNING! Ensure that the printer's built-in Residual-Current Circuit Breakers (RCCB) or Ground Fault Circuit Interrupters ( device (such as an isolating transformer) will be used to supply power to the printer. 10 Chapter 2 Site preparation
  • HP Latex 2700 | Site Preparation Guide - Page 15
    of relatively noise-free AC power. ● In order to ensure optimum performance and reliability, your printer should be protected from variations in line voltage, which are common to production printing environments. Lighting, line faults, or the power switching commonly found in machinery in factory
  • HP Latex 2700 | Site Preparation Guide - Page 16
    uninterrupted copper ground wire from the main building service panel. These should run in the same be provided by the customer. TIP: HP recommends that you use an air compressor printer. Failure to keep these environmental conditions within the standard ranges may cause print-quality problems
  • HP Latex 2700 | Site Preparation Guide - Page 17
    volume of 140 m³ (4944 ft³). These specifications are valid for the following conditions: one HP printer printing a black area-fill plot at 100 m²/h (1076 ft²/h), 3 passes, 90% of ink, assuming 8 hours of printing exposure time a day. If there is more equipment in the room, or different conditions
  • HP Latex 2700 | Site Preparation Guide - Page 18
    printer. HP guide printer. To calculate the load-bearing characteristics of the print production floor, consult a structural engineer. Printer weight with packaging Printer printer has four wheels used to move the printer and three feet that must be lowered to touch the ground and support the printer
  • HP Latex 2700 | Site Preparation Guide - Page 19
    Printer feet Printer dimensions In the table below, the number or letter in the left column corresponds to the diagram above. A 5.7 m (224.4 in) B 3.73 m (146.8 in) C 1.12 m (44.1
  • HP Latex 2700 | Site Preparation Guide - Page 20
    . You need enough space to perform the following tasks: ● Print ● Use the HP Internal Print Server ● Replace a substrate roll ● Service the printer or replace printer components ● Ensure the printer is well ventilated Your printer has the following dimensions: Weight Width Depth Height 1300 kg
  • HP Latex 2700 | Site Preparation Guide - Page 21
    of 3.2 m (126 in) width without removing the spindle from the support near the built-in computer, the distance C should be 2.4 m process. WARNING! The zone surrounding the printer should be considered a restricted access area area for materials used with the printer, thought should not only be given
  • HP Latex 2700 | Site Preparation Guide - Page 22
    requirements The printer requires hardware and software to certain specifications, some provided by HP and some instruct the customer IT to create routing rules that route around the proxy for these addresses. A minimum upload speed of 5 Mb/s is required. HP-provided components ● HP Internal Print
  • HP Latex 2700 | Site Preparation Guide - Page 23
    LAN (minimum 1 Gb/s) connection ● RIP station and software ● CAT-6 LAN cable long enough to connect the printer to the network RIP requirements There are two RIPs offered by HP that may be used with the printer. ● HP Large Format Onyx Thrive RIP, from version 21.1 onwards: product number D9Z41B
  • HP Latex 2700 | Site Preparation Guide - Page 24
    of Onyx configuration, see http://www.onyxgfx.com/system-specifications/. HP Large Format Caldera Grand RIP (minimum configuration) ● Linux: .com/support/minimal-requirements/ ● http://www.caldera.com/product/grandrip/ External color profiling In order to build color profiles for your printer, an
  • HP Latex 2700 | Site Preparation Guide - Page 25
    ) 2 m (78.8 in) 1.9 m (74.8 in) 3.9 m (154 in) WARNING! After being removed from the package, the printer can be moved up or down a ramp of no more than 3% inclination. TIP: Decide when you will remove the printer from the package. It is recommended that the shipping package be unpacked as close as
  • HP Latex 2700 | Site Preparation Guide - Page 26
    as shown below. Ground-floor installation HP strongly recommends lowering the printer with the ramps as indicated in the installation guide. In exceptional cases, where ramps cannot be used due to a physical barrier, follow the alternative instructions indicated carefully. CAUTION: Unloading and
  • HP Latex 2700 | Site Preparation Guide - Page 27
    ; it can be ordered as a service kit (K4T88-67290). Advanced booking for the services of a machinery-moving contractor/rigger must be made. It is important to confirm that the hired moving specialist and moving equipment will be available when the printer is delivered. The following equipment is
  • HP Latex 2700 | Site Preparation Guide - Page 28
    ● Two skates to move the package (optional) ● Electric pallet jack (optional) 24 Chapter 3 Shipment arrival preparation
  • HP Latex 2700 | Site Preparation Guide - Page 29
    sites, it may be necessary to remove the packaging before lifting the printer with the crane. CAUTION: Unloading and moving the printer and all system components is the responsibility of the customer and not HP. Failure to provide the required moving and lifting equipment could result in
  • HP Latex 2700 | Site Preparation Guide - Page 30
    can be disposed of. Most of the waste will be wood materials. Consult with your local authorities to determine the correct manner in which to dispose of it. HP recommends keeping the internal printer retainers (small parts), in case the printer needs to be moved later. 26 Chapter 3 Shipment arrival
  • HP Latex 2700 | Site Preparation Guide - Page 31
    online. How to create a Site Preparation To create the Site preparation for the customer you can do it through the Service Center for channel Desktop App (SC4CH) or with Service Center for Channel Mobile App. NOTE: We recommend to do it through SC4CH Mobile App. How to create Site preparation
  • HP Latex 2700 | Site Preparation Guide - Page 32
    1. Go to Installed base tab 2. Click on Site preparation tab 3. Add new Site prep 4. Fill customer info 28 Chapter 4 Site preparation checklist
  • HP Latex 2700 | Site Preparation Guide - Page 33
    5. Verify information 6. Customer will receive Email 7. To start with the Site preparation checklist go to section SC4CH Mobile app on page 31. How to create Site preparation in SC4CH Desktop App 1. Go to Installed base tab How to create Site preparation in SC4CH Desktop App 29
  • HP Latex 2700 | Site Preparation Guide - Page 34
    2. Click New printer installation 3. Fill customer info 30 Chapter 4 Site preparation checklist
  • HP Latex 2700 | Site Preparation Guide - Page 35
    and upload in SC4CH Fill the Site preparation You can fill the site preparation manually, but we recommend to completed it with SC4CH Mobile App as will be integrated with the installation process through the app. Manually If for any reason customer cannot fill the checklist through SC4CH Mobile app
  • HP Latex 2700 | Site Preparation Guide - Page 36
    1. Go to Site preparation tab and click Continue step 2. 2. Add Address information 32 Chapter 4 Site preparation checklist
  • HP Latex 2700 | Site Preparation Guide - Page 37
    3. Fill customer information 4. Fill Field Engineer information SC4CH Mobile app 33
  • HP Latex 2700 | Site Preparation Guide - Page 38
    5. Printer planning installation 6. Fill General access&equipment unloading 34 Chapter 4 Site preparation checklist
  • HP Latex 2700 | Site Preparation Guide - Page 39
    7. Fill room layout & flooring 8. Fill Safety requirements SC4CH Mobile app 35
  • HP Latex 2700 | Site Preparation Guide - Page 40
    9. Fill Electrical installation 10. Fill electrical configuration 36 Chapter 4 Site preparation checklist
  • HP Latex 2700 | Site Preparation Guide - Page 41
    11. Fill Networking requirements 12. Fill Equipment preparation SC4CH Mobile app 37
  • HP Latex 2700 | Site Preparation Guide - Page 42
    13. Fill RIP requirements 14. Fill Environmental Requirements 38 Chapter 4 Site preparation checklist
  • HP Latex 2700 | Site Preparation Guide - Page 43
    15. Completion Level Review 16. Customer signs SC4CH Mobile app 39
  • HP Latex 2700 | Site Preparation Guide - Page 44
    SC4CH Mobile App If the Site Preparation is completed Manually If the site preparation was completed manually ask to the customer to send the fulfilled pdf document to you. Then you can upload the PDF document to the printer card through Service Center for Channel Mobile app following the next steps
  • HP Latex 2700 | Site Preparation Guide - Page 45
    1. Go to PrintOS Service Center for Channel Home tab and Select the customer 2. Click on the printer If the Site Preparation is completed Manually 41
  • HP Latex 2700 | Site Preparation Guide - Page 46
    Site Preparation is completed in PrintOS If the site preparation is completed Through SC4CH Mobile App, will be uploaded automatically in PrintOS. Once you have submitted the site preparation for your printer through Service Center for Channel mobile app, then you can start the installation of the
  • HP Latex 2700 | Site Preparation Guide - Page 47
    4. You will be redirected to Add customer & device panel If the Site Preparation is completed in PrintOS 43
  • HP Latex 2700 | Site Preparation Guide - Page 48
    site has been prepared according to the specifications provided in the site preparation guide, that all checklist items have been completed, and that the site be trained on printer use and maintenance Name Telephone Email Printer HP Latex 2700 Printer HP Latex 2700W Printer 44 Chapter 5
  • HP Latex 2700 | Site Preparation Guide - Page 49
    jack available to help position the package? Will you install the printer on a second level or higher? If guide? If special reinforcements are necessary, are they completed? Is the floor prepared to install the heavy-duty rolls accessory? Safety requirements Is there an emergency exit in the print
  • HP Latex 2700 | Site Preparation Guide - Page 50
    a task and to take appropriate measures to minimize the risks? Will printer operations be supervised at all times? Electrical installation Has the site been properly installed, as shown in the site preparation guide? Have you booked the services of an electrician for the day of installation
  • HP Latex 2700 | Site Preparation Guide - Page 51
    computer to be used available with the required specifications? If neither of the HP Large Format RIPs is to be used, is there a computer available with a RIP application installed that supports the printer? Do you have a spectrophotometer that is compatible with the RIP? Comments Comments Comments
  • HP Latex 2700 | Site Preparation Guide - Page 52
    production area free from dirt and dust? Does the print production area have sufficient lighting? Have you met or exceeded all the requirements specified in the site preparation guide? Have you met or exceeded all the ventilation and air conditioning requirements: ● 140 m³ (4944 ft³) ...or met the
  • HP Latex 2700 | Site Preparation Guide - Page 53
    (panels and FSDU) Window graphics Other applications (to fill in) Yes No Comments Training Are you aware of the training available for the printer? Will the operator be available for the full amount of time required for the installation training (2-2.5 days)? Yes No Comments Checklist 49
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
HP Latex 2700 Printer Series
Site Preparation Guide
SUMMARY
You are responsible for preparing the physical site for the installation of the printer.