HP Latex 600 CIP Configuration

HP Latex 600 Manual

Get HP Latex 600 PDF manuals and user guides View all HP Latex 600 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Latex 600 manual content summary:

  • HP Latex 600 | CIP Configuration - Page 1
    Designjet L65500 and the Scitex LX series printers. Applicable products This document applies to the following products: HP Designjet L65500 series and HP Scitex LX series with firmware versions GF-BOB_4.x or higher or GF-BOO_2.x or higher. CIP enablement instructions To enable the CIP: 1. Start the
  • HP Latex 600 | CIP Configuration - Page 2
    HP LFP Customer Involvement Program The Data Transfer Agreement presented here covers remote support and CIP data sending. To accept it and activate the CIP, click the "Accept" button. If you do not accept the agreement, click the "Cancel" button. CIP status change instructions To change the status
  • HP Latex 600 | CIP Configuration - Page 3
    HP LFP Customer Involvement Program 2. In the Preferences window that opens, navigate to the "CallMe@HP" tab: 3. To activate the CIP, check the "CallMe@HP" box and click "OK"; to deactivate the CIP, uncheck the box and click "OK". © Hewlett-Packard 2012 Page 3 of 6
  • HP Latex 600 | CIP Configuration - Page 4
    LFP Customer Involvement Program CIP status check instructions To check the status of the CIP: 1. Use the Tools > Preferences menu of the IPS software as described in the previous section, and navigate to the "CallMe@HP" tab; 2. Make sure that the "CallMe@HP Activation" box is checked to enable the
  • HP Latex 600 | CIP Configuration - Page 5
    HP LFP Customer Involvement Program 5. If an error is reported after the connection check, you may have to configure a the IPS software on. The details of proxy server configuration are site dependent, so ask your local IT support person for help if necessary. © Hewlett-Packard 2012 Page 5 of 6
  • HP Latex 600 | CIP Configuration - Page 6
    HP LFP Customer Involvement Program To check if the proxy configuration is working correctly, go back to the "CallMe@HP" tab and use the "Check Connection" button as described above. © Hewlett-Packard 2012 Page 6 of 6
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
HP LFP Customer Involvement Program
© Hewlett-Packard 2012
Page 1 of 6
CIP Configuration:
Designjet L65500, Scitex LX series
Version 1.0, August 7, 2012
Introduction
The Customer Involvement Program (CIP) is a statistical large format printer (LFP) usage tracking system. It
can optionally also be used to determine eligibility for certain usage based reward programs. Please refer
to the “HP LFP Customer Involvement Program Q&A” document for further information.
This document provides instructions for activating the CIP for the Designjet L65500 and the Scitex LX series
printers.
Applicable products
This document applies to the following products: HP Designjet L65500 series and HP Scitex LX series with
firmware versions GF-BOB_4.x or higher or GF-BOO_2.x or higher.
CIP enablement instructions
To enable the CIP:
1.
Start the Internal Print Server (IPS) software that came with your printer;
2.
If this is the first time you are running the IPS, or you have not activated or dismissed it previously,
a “Proactive Support” window will appear:
This window is unrelated to the CIP. Select the options you want, and close the window.
3.
Next, the “CallMe@HP” window will appear: